Laser surface alloying with carbon on 15-5PH steel for improved wear resistance

References

• Nong XD, Zhou XL, Li JH, et al. Selective laser melting and heat treatment of precipitation hardening stainless steel with a refined microstructure and excellent mechanical properties. Scr. Mater. 2020;178:7–12.
   Web of Science ®Google Scholar
• Wang Z, Li H, Shen Q, et al. Nano-precipitates evolution and their effects on mechanical properties of 17-4 precipitation-hardening stainless steel. Acta Mater. 2018;156:158–171.
   Web of Science ®Google Scholar
• Couturier L, De Geuser F, Deschamps A. Microstructural evolution during long time aging of 15–5PH stainless steel. Materialia. 2020;9:100634.
   Web of Science ®Google Scholar
• Li W, Zhang Z. Surface hardening of Maraging 15-5PH Stell. Die Mould Manuf. 2009;9(5):86–89.
   Google Scholar
• Couturier L, De Geuser F, Descoins M, et al. Evolution of the microstructure of a 15-5PH martensitic stainless steel during precipitation hardening heat treatment. Mater Des. 2016;107:416–425.
   Web of Science ®Google Scholar
• Liu RL, Yan MF. Improvement of wear and corrosion resistances of 17-4PH stainless steel by plasma nitrocarburizing. Mater Des (1980–2015). 2010;31(5):2355–2359.
   Web of Science ®Google Scholar
• Peng XY, Xl Z, Hua XZ, et al. Effect of aging on hardening behavior of 15-5 PH stainless steel. J Iron Steel Res. 2015;22(7):607–614.
   Web of Science ®Google Scholar
• Damborenea JD. Surface modification of metals by high power lasers. Surf Coat Technol. 1998;100–101:377–382.
   Web of Science ®Google Scholar
• Tian YS, Chen CZ, Li ST, et al. Research progress on laser surface modification of titanium alloys. Appl Surf Sci. 2005;242(1–2):177–184.
   Web of Science ®Google Scholar
• Qiu F, Uusitalo J, Kujanpää V. Laser transformation hardening of carbon steel: microhardness analysis on microstructural phases. Surf Eng. 2013;29(1):34–40.
   Web of Science ®Google Scholar
• Wang YX, Yan MF, Li B, et al. Surface properties of low alloy steel treated by plasma nitrocarburizing prior to laser quenching process. Opt Laser Technol. 2015;67:57–64.
   Web of Science ®Google Scholar
• Chen Z, Zhou G, Chen Z. Microstructure and hardness investigation of 17-4PH stainless steel by laser quenching. Mater Sci Eng A. 2012;534(2):536–541.
   Web of Science ®Google Scholar
• Ren C, Zg L, Shu D, et al. Microstructure and water erosion resistance property of Stellite6 coating by laser cladding on 17-4PH stainless steel surface. Chin J Lasers. 2017;4:107–114.
   Google Scholar
• Han T, Xiao M, Zhang Y, et al. Laser cladding Ni-Ti-Cr alloy coatings with different process parameters. Mater Manuf Process. 2019;34(15):1710–1718.
   Web of Science ®Google Scholar
• Kaiming W, Yulong L, Hanguang F, et al. A study of laser cladding NiCrBSi/Mo composite coatings. Surf Eng. 2016;34(4):267–275.
   Web of Science ®Google Scholar
• Sexton L, Lavin S, Byrne G, et al. Laser cladding of aerospace materials. J Mater Sci Technol. 2002;122(1):63–68.
   Web of Science ®Google Scholar
• Almeida A, Anjos M, Vilar R, et al. Laser alloying of aluminium alloys with chromium. Surf Coat Technol. 1995;70(2–3):221–229.
   Web of Science ®Google Scholar
• Dutta Majumdar J, Manna I. Laser material processing. Int Mater Rev. 2013;56(5–6):341–388.
   Web of Science ®Google Scholar
• Mehrjou B, Soltani R, Sohi MH, et al. Laser surface treatment of AZ91 magnesium alloy presprayed with WC–Co. Surf Eng. 2016;32(12):893–901.
   Web of Science ®Google Scholar
• Nath S, Pityana S, Dutta Majumdar J. Laser surface alloying of aluminium with WC + Co + NiCr for improved wear resistance. Surf Coat Technol. 2012;206(15):3333–3341.
   Web of Science ®Google Scholar
• Zhou F, Zhang H, Sun C, et al. Microstructure and wear properties of multi ceramics reinforced metal-matrix composite coatings on Ti–6Al–4 V alloy fabricated by laser surface alloying. Surf Eng. 2019;35(8):683–691.
   Web of Science ®Google Scholar
• Kulka M, Mikolajczak D, Makuch N, et al. Wear resistance improvement of austenitic 316L steel by laser alloying with boron. Surf Coat Technol. 2016;291:292–313.
   Web of Science ®Google Scholar
• Song L, Zeng G, Xiao H, et al. Repair of 304 stainless steel by laser cladding with 316L stainless steel powders followed by laser surface alloying with WC powders. J Manuf Process. 2016;24:116–124.
   Web of Science ®Google Scholar
• Yao J, Wang L, Zhang Q, et al. Surface laser alloying of 17-4PH stainless steel steam turbine blades. Opt Laser Technol. 2008;40(6):838–843.
   Web of Science ®Google Scholar
• Zeng D, Lu L, Li Z, et al. Influence of laser dispersed treatment on rolling contact wear and fatigue behavior of railway wheel steel. Mater Des (1980–2015). 2014;54:137–143.
   Web of Science ®Google Scholar
• Lu JZ, Cao J, Lu HF, et al. Wear properties and microstructural analyses of Fe-based coatings with various WC contents on H13 die steel by laser cladding. Surf Coat Technol. 2019;369:228–237.
   Web of Science ®Google Scholar
• Wang YD, Tang HB, Fang YL, et al. Microstructure and mechanical properties of laser melting deposited 1Cr12Ni2WMoVNb steel. Mater Sci Eng A. 2010;527(18–19):4804–4809.
   Web of Science ®Google Scholar
• Zw L, Cheng X, Li J, et al. Heat-processing technology for laser additive manufacturing of 05Cr15Ni5Cu4Nb precipitation-hardening stainless steels. Chin J Lasers. 2017;6:149–156.
   Google Scholar
• Yy Z, Xj T, Li J, et al. Microstructure evolution and layer bands of laser melting deposition Ti–6.5Al–3.5Mo–1.5Zr–0.3Si titanium alloy. J Alloy Compd. 2014;616:468–474.
   Web of Science ®Google Scholar
• Wang Z, Wang H, Liu D. Microstructure and mechanical properties of AF1410 ultra-high strength steel using laser additive manufacture technique. Chin J Lasers. 2016;43(4):0403001.
   Google Scholar
• Sarkar S, Kumar CS, Nath AK. Effects of heat treatment and build orientations on the fatigue life of selective laser melted 15-5 PH stainless steel. Mater Sci Eng A. 2019;755:235–245.
   Web of Science ®Google Scholar
• Roy A, Manna I. Laser surface engineering to improve wear resistance of austempered ductile iron. Mater Sci Eng A. 2001;297(1–2):85–93.
   Web of Science ®Google Scholar
• Hemmati I, Ocelík V, De Hosson JTM. The effect of cladding speed on phase constitution and properties of AISI 431 stainless steel laser deposited coatings. Surf Coat Technol. 2011;205(21–22):5235–5239.
   Web of Science ®Google Scholar
• Speer J, Matlock DK, De Cooman BC, et al. Carbon partitioning into austenite after martensite transformation. Acta Mater. 2003;51(9):2611–2622.
   Web of Science ®Google Scholar
• Yang H, Bhadeshia H. Austenite grain size and the martensite-start temperature. Scr Mater. 2009;60(7):493–495.
   Web of Science ®Google Scholar
• Bhambroo R, Roychowdhury S, Kain V, et al. Effect of reverted austenite on mechanical properties of precipitation hardenable 17-4 stainlesssteel. Mater Sci Eng A. 2013;568:127–133.
   Web of Science ®Google Scholar
• Wieczerzak K, Bala P, Dziurka R, et al. The effect of temperature on the evolution of eutectic carbides and M 7 C 3 → M 23 C 6 carbides reaction in the rapidly solidified Fe-Cr-C alloy. J Alloy Compd. 2017;698:673–684.
   Web of Science ®Google Scholar
• Wieczerzak K, Bala P, Stepien M, et al. Formation of eutectic carbides in Fe–Cr–Mo–C alloy during non-equilibrium crystallization. Mater Des. 2016;94:61–68.
   Web of Science ®Google Scholar
• Baiguirani H HR. The effect of ageing upon the microstructure and mechanical properties of type 15-5 PH stainless steel. Mater Sci Eng A. 2002;338(1):142–159.
   Web of Science ®Google Scholar
• Kc S, Nezhadfar PD, Phillips C, et al. Tribological behavior of 17–4 PH stainless steel fabricated by traditional manufacturing and laser-based additive manufacturing methods. Wear. 2019;440–441:203100.
   Web of Science ®Google Scholar
• Yang WS, Zhou T, Zhu ZJ, et al. Effects of laser carburised striation units on rail steel fatigue wear. Mater Sci Technol 2016;33(1):114–120.
   Web of Science ®Google Scholar
• He B, Cheng X, Li J, et al. Effect of laser surface remelting and low temperature aging treatments on microstructures and surface properties of Ti-55511 alloy. Surf Coat Technol. 2017;316:104–112.
   Web of Science ®Google Scholar
• Lebedeva IL, Presnyakova GN. Adhesion wear mechanisms under dry friction of titanium alloys in vacuum. Wear. 1991;148(2):203–210.
   Web of Science ®Google Scholar