References
- Zhang Y, Wang G, Zhang Y, et al. Crashworthiness design of car threshold based on aluminium foam sandwich structure. Int J Crashworthines. 2021 [cited 2022 Apr 8]. doi:https://doi.org/10.1080/13588265.2021.1914978.
- Patel SK, Singh VP, Yadav SK, et al. Microstructural and compressive deformation behavior of aluminum-foam-filled sections. Soft Mater. 2019;17(1):14–23.
- Xin Y, Yan H, Cheng S. Drop weight impact tests on composite sandwich panel of aluminum foam and epoxy resin. Mech Adv Mater Struc. 2021;28(4):343–356.
- Martín EP. Microstructural parameters affecting the compressive response of closed-cell aluminum foams. Mech Adv Mater Struc. 2021 [cited 2022 Apr 8]. doi:https://doi.org/10.1080/15376494.2021.1872747.
- Sahu S, Ansari MZ, Mondal DP, et al. Quasi-static compressive behaviour of aluminium cenosphere syntactic foams. Mater Sci Tech-Lond. 2019;35(7):856–864.
- Hou W, Yang X, Zhang W, et al. Design of energy-dissipating structure with functionally graded auxetic cellular material. Int J Crashworthines. 2018;23(3-4):366–376.
- Abdulla T. Enhancement in specific strength of open cell aluminium foams through plasma electrolytic oxidation treatment [Ph.D. dissertation]. Sheffield (SY): The University of Sheffield; 2013.
- Rossi S, Bergamo L, Calovi M, et al. Effect of enamel coatings on the mechanical properties of aluminium foams. Mech Adv Mater Struct. 2019;26(13):1130–1139.
- Zhu X, Liu J. Effect of micro-arc oxidation coatings on corrosion resistance and mechanical properties of closed-cell aluminum foams. Surf Rev Lett. 2013;20(5):1350053.
- Liu HM, Pan WC, Si FJ, et al. Enhanced compressive property of Al composite foams at elevated temperatures via plasma electrolytic oxidation. Metals. 2018;8(2):118.
- Jung A, Natter H, Diebels S, et al. Nanonickel coated aluminum foam for enhanced impact energy absorption. Adv Eng Mater. 2010;13(1-2):23–28.
- Genna S, Trovalusci F, Ucciardello N, et al. Improving performance of an open cell aluminium foam through electro-deposition of nickel. Materials. 2019;12(1):133.
- Xu Y, Ma S, Fan M, et al. Mechanical and corrosion resistance enhancement of closed-cell aluminum foams through nano-electrodeposited composite coatings. Materials. 2019;12(19):3197.
- Liu J, Si F, Zhu X, et al. Compressive properties of open-cell Al hybrid foams at different temperatures. Materials. 2017;10(2):98.
- Jung A, Diebels S, Koblischka A, et al. Microstructural analysis of electrochemical coated open-cell metal foams by EBSD and nanoindentation. Adv Eng Mater. 2014;16(1):15–20.
- Rossi S, Fedel M, Da-Col L, et al. Coatings to increase the corrosion behaviour of aluminium foam. Surf Eng. 2017;33(6):405–409.
- Wang Z, Cheng X, Gong Y, et al. Tribocorrosion behaviours of cold-sprayed diamond–Cu composite coatings in artificial sea water. Surf Eng. 2018;34(5):392–398.
- Faid H, Mentar L, Khelladi MR, et al. Deposition potential effect on surface properties of Zn–Ni coatings. Surf Eng. 2017;33(7):529–535.
- Xu X, Zhu Z, Xue Z, et al. Friction-assisted pulse electrodeposition of high-performance ultrafine-grained Cu deposits. Surf Eng. 2021;37(11):1414–1421.
- Ramalingam S, Balakrishnan K, Shanmugasamy S. Electrodeposition and characterisation of Cu–MWCNTs nanocomposite coatings. Surf Eng. 2017;33(5):369–374.
- Georgy K, Neelakantan L, Kumar K, et al. Influence of Cu, Zn and Si alloying elements on Al alloy foams produced using Mg blowing agent. J Mater Sci. 2021;56(3):1–19.
- Cao K, Yu M, Liang CM, et al. Study on thermal conductivity of cold sprayed Cu coating. Surf Eng. 2020;36(10):1058–1066.
- Liu H, Cao ZK, Luo HJ, et al. Performance of closed-cell aluminum foams subjected to impact loading. Mater Sci Eng A. 2013;570:27–31.
- Rossi S, Bizzotto M, Deflorian F, et al. Study of anodizing process on aluminium foam to improve the corrosion behavior. Surf Interface Anal. 2019;51(12):1194–1206.
- Suzuki A, Kosugi N, Takata N, et al. Microstructure and compressive properties of porous hybrid materials consisting of ductile Al/Ti and brittle Al3Ti phases fabricated by reaction sintering with space holder. Mater Sci Eng A. 2020;776:139000.
- Schaedler TA, Ro CJ, Sorensen AE, et al. Designing metallic microlattices for energy absorber applications. Adv Eng Mater. 2014;16(3):276–283.
- International Organization for Standardization (ISO). Metallic materials-ductility testing-compression test for porous and cellular metals. Switzerland; 2011. Standard No. ISO 13314:2011(E).
- Liu J, Xu B, Wang H, et al. Effects of film thickness and microstructures on residual stress. Surf Eng. 2016;32(3):178–184.
- Du H, Cui C, Liu H, et al. Improvement on compressive properties of lotus-type porous copper by a nickel coating on pore walls. J Mater Sci Technol. 2020;37:114–122.
- Jie W, Hong C, Li C, et al. Open-celled porous NiAl intermetallics prepared by replication of carbamide space-holders. Trans Nonferrous Metals Soc China. 2011;21(8):1750–1754.