Advanced search
Publication Cover
Surface Engineering Volume 38, 2022 - Issue 3
Journal homepage
145
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Preparation of a novel multi-layered AlSnCu coating for journal bearings

Hui Songa Key Laboratory of Marine Materials and Related Technologies, CAS, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, People’s Republic of ChinaCorrespondence[email protected]
View further author information
,
Jie Chenb Inner Mongolia Metallic Materials Research Institute, Ningbo, People’s Republic of ChinaCorrespondence[email protected]
View further author information
,
Zhiyong Liub Inner Mongolia Metallic Materials Research Institute, Ningbo, People’s Republic of ChinaView further author information
&
Nan Jianga Key Laboratory of Marine Materials and Related Technologies, CAS, Zhejiang Key Laboratory of Marine Materials and Protective Technologies, Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo, People’s Republic of ChinaCorrespondence[email protected]
View further author information
Pages 244-251 | Received 14 Jan 2022, Accepted 06 May 2022, Published online: 24 May 2022

References

  • Mourelatos ZP. An efficient journal bearing lubrication analysis for engine crankshafts. Tribol Tran. 2001;44(3):351–358.
  • Sander D, Allmaier H, Witt M, et al. Journal bearing friction and wear in start/stop operation. MTZ Worldw. 2017;78:46–51.
  • Summer F, Grün F, Offenbecher M, et al. Challenges of friction reduction of engine plain bearings-tackling the problem with novel bearing materials. Tribo Int. 2019;131:238–250.
  • Adam A, Andler G, Arnold G. The progression of engine bearing overlays. SAE Technical Paper. 2002;01: 1316.
  • Ishikawa H, Nomura K, Mizuno Y, et al. Development of bearing with composite overlay for high-performance engines. SAE Technical Paper. 1996;960988.
  • Guo Q, Guo Y, Guo D, et al. Microstructure and properties of the Cp/AlSn coatings deposited by magnetron sputtering/multi-arc ion plating. Surf Coat Tech. 2020;384:125303.
  • Grün F, Godor I, Gartner W, et al. Influence of overlays on the tribological behavior of journal bearing materials. World Tribology Congress. 2009;F-131:Kyoto, Japan.
  • Ali WY. Friction and wear of copper/lead and aluminium/tin filled polyamide coatings. Lubr Sci. 1994;10(4):309–322.
  • Adamczak S, Stepien K, Wrzochal M. Comparative study of measurement systems used to evaluate vibrations of rolling bearings. Procedia Eng. 2017;192:971–975.
  • De Rosa H, Cardús G, Broitman E, et al. Structural properties of AlSn thin films deposited by magnetron sputtering. J Mater Sci Lett. 2001;20:1365–1367.
  • Grün F, Gódor I, Gärtner W, et al. Tribological performance of thin overlays for journal bearings. Tribo Int. 2011;44:1270–1280.
  • Lubwama M, Corcoran B, Sayers K. DLC films deposited on rubber substrates: a review. Surf Eng. 2015;31(1):1–10.
  • Sun S, Chen J, Wang Y, et al. Structural sensitivity of MoS2-based films in solid space lubrication. Surf Eng. 2020;36(1):106–113.
  • Zhao F, Li HX, Ji L, et al. Structural, mechanical and tribological characterizations of a-C:H:Si films prepared by a hybrid PECVD and sputtering technique. J Phys D: Appl Phys. 2009;42:165407.
  • Hong SG, Kwon S, Kang S, et al. Influence of substrate bias voltage on structure and properties of Cr-Mo-Si-N coatings prepared by a hybrid coating system. Surf Coat Tech. 2008;203(5-7):624–627.
  • Chang Y, Chao L. Effect of substrate bias voltage on the mechanical properties of AlTiN/CrTiSiN multilayer hard coatings. Vacuum. 2021;190:110241.
  • Meng HN, Zhang ZZ, Zhao FX, et al. Tribological behaviours of ultrafine Sn/heat treated serpentine powder in grease. Tribol-Mater Surf Inter. 2014;8(3):159–164.
  • Lei Y, Du J, Pang X, et al. Tribological properties and lubrication mechanism of in situ graphene-nickel matrix composite impregnated with lubricating oil. Mater Res Express. 2018;5:056512.
  • Wei R, Vajo JJ, Matossian JN, et al. Aspects of plasma-enhanced magnetron-sputtered deposition of hard coatings on cutting tools. Surf Coat Tech. 2002;158–159:465–472.
  • Yang C, Jiang B, Liu Z, et al. Structure and properties of Ti films deposited by dc magnetron sputtering, pulsed dc magnetron sputtering and cathodic arc evaporation. Surf Coat Tech. 2016;304:51–56.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.