Cold-spray manufacturing of Zn/ZnO nanocomposite targets for ZnO sputtering

References

• Muchuweni E, Sathiaraj TS, Nyakotyo H. Synthesis and characterization of zinc oxide thin films for optoelectronic applications. Heliyon. 2017;3:e00285.
   PubMed Web of Science ®Google Scholar
• Zidi Z, Ltifi M, Ayadi ZB, et al. Effect of nano-ZnO on mechanical and thermal properties of geopolymer. J Asian Ceram Soc. 2020;8:1–9.
   Web of Science ®Google Scholar
• Jayaprakash N, Suresh R, Rajalakshmi S, et al. One-step synthesis, characterisation, photocatalytic and bio-medical applications of ZnO nanoplates. Mater Technol. 2020;35:112–124.
   Web of Science ®Google Scholar
• Danwittayakul S, Songngam S, Sukkasi S. Enhanced solar water disinfection using ZnO supported photocatalysts. Environ Technol. 2020;41:349–356.
   PubMed Web of Science ®Google Scholar
• Siddheswaran R, Jeyanthi CE, Thangaraju K, et al. Columnar structure growth of Mn-doped ZnO (MZO) thin films by radio frequency co-sputtering and studies on films properties. Mater Technol. 2022;37:79–85.
   Web of Science ®Google Scholar
• Ma M, Ma H, Wang Z, et al. Anti-corrosion properties of NiCr amorphous coatings sprayed by magnetron sputtering. Surf Eng. 2019;37(2):1–9.
   Web of Science ®Google Scholar
• Mengnan M, Huanming M, Zaide W, et al. Anti-corrosion properties of NiCr amorphous coatings sprayed by magnetron sputtering. Surf Eng. 2021;37:188–196.
   Web of Science ®Google Scholar
• Kamble SS, Radhakrishnan JK, Krishnamoorthy R. Effect of O2 flow rate on the characteristics of ZnO thin films deposited by RF reactive magnetron sputtering. Mater Technol. 2018;33:709–715.
   Web of Science ®Google Scholar
• Jie L, Guang-Kun R, Jiahui C, et al. Facilitating complex thin film deposition by using magnetron sputtering: a review. JOM. 2022;74:1–13.
   Web of Science ®Google Scholar
• Inoue K, Shibata M. US patents; 2019.
   Google Scholar
• Ye W, Fang K. Comparative study on structure and properties of ZnO thin films prepared by RF magnetron sputtering using pure metallic Zn target and ZnO ceramic target. Surf Eng. 2020;36:49–54.
   Web of Science ®Google Scholar
• Ham G-S, Wi D-Y, Yang J-M, et al. Manufacturing of large-scale cold-sprayed Ta target material and Its sputtering property. J Therm Spray Tech. 2019;28:1974–1982.
   Web of Science ®Google Scholar
• Waqas AM, Zahid AM, Muhammad A, et al. Preparation and characterization of Cu and Al doped ZnO thin films for solar cell applications. Crystals. 2022;12:120–128.
   Web of Science ®Google Scholar
• Winnicki M, Wiatrowski A, Mazur M. High power impulse magnetron sputtering of In2O3/Sn cold sprayed composite target. Materials. 2021;14:1228.
   PubMed Web of Science ®Google Scholar
• Huang L, Zhang J, Pan Y, et al. Spark plasma sintering of W-10Ti high-purity sputtering target: densification mechanism and microstructure evolution. Int J Refract Met Hard Mater. 2020;92:105313.
   Web of Science ®Google Scholar
• Guo Q, Zheng H, Zheng L, et al. Target grain size dependence of the morphology, crystallinity and magnetic properties of yttrium iron garnet films. Ceram Int. 2019;45:3414–3418.
   Web of Science ®Google Scholar
• Nguyen QD, Phan QD, Tran ĐQ, et al. Effects of Ti target poisoning to titanium nitride coating fabricated by a physical vapor deposition technique. Appl Mech Mater. 2019;889:185–189.
   Google Scholar
• Shuyong T, Xiaodong L, Shuaishuai Z, et al. Study on mechanical properties of CoCrFeNiNx high entropy alloy films based on nanoindentation. Mater Technol. 2021;1:1–12.
   Google Scholar
• Stadler BJH. Chapter 7 – vapor processes. In: Francis LF, editor. Materials processing. Boston (MA): Academic Press; 2016. p. 513–588.
   Google Scholar
• Cardenas J, Leon J, Olaya JJ. Synthesis and high-temperature corrosion resistance of Ti-Zr-Si-N coatings deposited by means of sputtering. Corros Eng Sci Technol. 2019;54:233–240.
   Web of Science ®Google Scholar
• Xu J, Yang L, Wang H, et al. Sintering behavior and refining grains of high density tin doped indium oxide targets with low tin oxide content. J Mater Sci Mater Electron. 2016;27:3298–3304.
   Web of Science ®Google Scholar
• Demidov ES, Sdobnyakov VV, Vazenmiller GV, et al. Manufacturing of sputtering composite targets containing phases of Co2FeSi or Co2MnSi Heusler alloy. Tech Phys. 2018;63:1002–1005.
   Web of Science ®Google Scholar
• Hsu P, Tsai S, Chang C, et al. Preparation of p-type SnO thin films and transistors by sputtering with robust Sn/SnO2 mixed target in hydrogen-containing atmosphere. Thin Solid Films. 2015;585:50–56.
   Web of Science ®Google Scholar
• Kim C, Kim S, Kim SE. Transparent SnOx thin films fabricated by radio frequency reactive sputtering with a SnO/Sn composite target. Thin Solid Films. 2017;634:175–180.
   Web of Science ®Google Scholar
• Zhou L, Dubey M, Simões R, et al. Conductive ZnO:Zn composites for high-rate sputtering deposition of ZnO thin films. J Electron Mater. 2015;44:682–687.
   Web of Science ®Google Scholar
• Assadi H, Gärtner F. Particle compression test: a key step towards tailoring of feedstock powder for cold spraying. Coatings. 2020;10:458.
   Web of Science ®Google Scholar
• Li W, Cao C, Wang G, et al. ‘Cold spray +’ as a new hybrid additive manufacturing technology: a literature review. Sci Technol Weld Joining. 2019;24:420–445.
   Web of Science ®Google Scholar
• Assadi H, Kreye H, Gärtner F, et al. Cold spraying – a materials perspective. Acta Mater. 2016;116:382–407.
   Web of Science ®Google Scholar
• Baek M-S, Kim Y-K, Lee K-A. Effect of strain rate on the microstructure evolution and compressive deformation behavior of high-strength Cu bulk material manufactured by cold spray process. J Therm Spray Technol. 2019;28:917–929.
   Web of Science ®Google Scholar
• Cavaliere P. Cold-spray coatings. 1st ed. cham-Switzerland: Springer; 2018.
   Google Scholar
• Viscusi A, Astarita A, Gatta RD, et al. A perspective review on the bonding mechanisms in cold gas dynamic spray. Surf Eng. 2019;35:743–771.
   Web of Science ®Google Scholar
• Li W, Yang K, Yin S, et al. Solid-state additive manufacturing and repairing by cold spraying: a review. J Mater Sci Technol. 2018;34:440–457.
   Web of Science ®Google Scholar
• Li W, Assadi H, Gaertner F, et al. A review of advanced composite and nanostructured coatings by solid-state cold spraying process. Crit Rev Solid State Mater Sci. 2019;44:109–156.
   Web of Science ®Google Scholar
• Winnicki M, Baszczuk A, Rutkowska-Gorczyca M, et al. Microscopic examination of cold spray cermet Sn + In2O3 coatings for sputtering target materials. Scanning. 2017;2017:10.
   Google Scholar
• Amirthagadeswaran KS. Corrosion and wear behaviour of nano Al2O3 reinforced copper metal matrix composites synthesized by high energy ball milling. Part Sci Technol. 2020;38:228–235.
   Web of Science ®Google Scholar
• Gowda AC, Koppad PG, Sethuram D, et al. Morphology studies on mechanically milled aluminium reinforced with B4C and CNTs. Silicon. 2019;11:1089–1098.
   Web of Science ®Google Scholar
• Gayathri N, Mukherjee P. Study of initial stages of ball-milling of Cu powder using X-ray diffraction. J Inst Eng (India): Ser D. 2018;99:125–132.
   Google Scholar
• Sharifi H, Tayebi M, Honarmand M. Production of a nanocrystalline composite of Al–4% Cu/SiC by a mechanical milling method. Mater Res Express. 2016;3:105050.
   Web of Science ®Google Scholar
• Srikanth A, Bolleddu V. A review on characteristics of cold sprayed coatings. Aust J Mech Eng. 2020;1:1–17.
   Google Scholar
• Berghaus JO, De Bosscher W. Google patents; 2017.
   Google Scholar
• Jayavelu S, Mariappan R, Rajkumar C. Wear characteristics of sintered AA2014 with alumina and titanium di-boride metal matrix composites. Int J Ambient Energy. 2018;42(2):1–6.
   Google Scholar
• Prajapati P, Chaira D. Fabrication and characterization of Cu–B4C metal matrix composite by powder metallurgy: effect of B4C on microstructure, mechanical properties and electrical conductivity. Trans Indian Inst Met. 2019;72:673–684.
   Web of Science ®Google Scholar
• Pandey S, Shrivastava PK, Dangi S, et al. Experimental modelling and optimisation of electrical arc machining of Al-B4C metal matrix composite. Aust J Mech Eng. 2019;20(1):1–11.
   Web of Science ®Google Scholar
• Reza M, Sajuri Z, Yunas J, et al. Effect of sputtering target’s grain size on the sputtering yield, particle size and coercivity (Hc) of Ni and Ni20Al thin films. IOP Conf Ser: Mater Sci Eng. 2016;114:012116.
   Google Scholar
• Hemmendinger KD, Bahena JA, Hodge AM. Characterization of grain boundary-engineered aluminum–magnesium alloys. Adv Eng Mater. 2020: 2000813.
   Web of Science ®Google Scholar