References
- Nicholson WJ. Titanium alloys for dental implants: a review. Prosthesis. 2020;2:100–116.
- Junker R, Dimakis A, Thoneick M, et al. Effects of implant surface coatings and composition on bone integration: a systematic review. Clin Oral Implants Res. 2009;20:185–206.
- Bartkowiak T, Medak M, Mrozek K, et al. Analysis of surface microgeometry created by electric discharge machining. Materials (Basel). 2020;13:3830.
- Emarati SM, Mozammel M. Fabrication of superhydrophobic titanium dioxide coating on AISI 316L stainless steel by electrophoretic deposition and using trimethoxy(propyl)silane modification. Surf Eng. 2019;35:456–465.
- Leilei Z, Shaoxian L, Hejun L, et al. Hydroxyapatite coating on C/C with graphene oxide interlayer. Surf Eng. 2018;34:801–808.
- Hsieh S-F, Lin M-H, Chen S-L, et al. Surface modification and machining of TiNi/TiNb-based alloys by electrical discharge machining. Int J Adv Manuf Technol. 2016;86:1475–1485.
- Liao P-B, Cheng H-C, Huang C-F, et al. The cell culture of titanium alloy surface modifications by micro-powder blasting and co-blast techniques. Surf Eng. 2019;35:643–651.
- Wennerberg A, Albrektsson T. Effects of titanium surface topography on bone integration: a systematic review. Clin Oral Implants Res. 2009;20:172–184.
- Mantripragada VP, Lecka-Czernik B, Ebraheim NA, et al. An overview of recent advances in designing orthopedic and craniofacial implants. J Biomed Mater Res A. 2012;101:3349–3364.
- Cui X, Kim H-M, Kawashita M, et al. Preparation of bioactive titania films on titanium metal via anodic oxidation. Dent Mater. 2009;25:80–86.
- Opoz T, Yasar H, Murphy M, et al. Ti6Al4V surface modification by hydroxyapatite powder mixed electrical discharge machining for medical application. Int J Adv Eng Pure Sci. 2019;31:1–10.
- Variola F, Brunski JB, Orsini G, et al. Nanoscale surface modifications of medically relevant metals: state-of-the-art and perspectives. Nanoscale. 2011;3:335–353.
- Vladescu A, Titorencu I, Dekhtyar Y, et al. In vitro biocompatibility of Si alloyed multi-principal element carbide coatings. Mukherjee A, editor. PLoS One. 2016;11:e0161151.
- Patel D, Jain V, Ramkumar J. Micro texturing on metallic surfaces: state of the art. Proc Inst Mech Eng Part B J Eng Manuf. 2018;232:941–964.
- Cobras DG, Fatu A, Maoui A, et al. Manufacturing textured surfaces: state of the art and recent developments. Proc Inst Mech Engi Part J J Eng Tribology. 2015;229:3–29.
- Pezzato L, Cerchier P, Brunelli K, et al. Plasma electrolytic oxidation coatings with fungicidal properties. Surf Eng. 2019;35:325–333.
- Caetano GL, dos Santos Junior J, Pereira BL, et al. One-step plasma electrolytic oxidation in Ti-30Nb-8Zr, Ti, and Nb surfaces. Surf Eng. 2021;37:1467–1475.
- Aydin F, Ayday A, Turan ME, et al. Role of graphene additive on wear and electrochemical corrosion behaviour of plasma electrolytic oxidation (PEO) coatings on Mg–MWCNT nanocomposite. Surf Eng. 2020;36:791–799.
- Devgan S, Sidhu SS. Potential of electrical discharge treatment incorporating MWCNTs to enhance the corrosion performance of the β-titanium alloy. Appl Phys A. 2020;126(211.
- Liew PJ, Yap CY, Wang J, et al. Surface modification and functionalization by electrical discharge coating: a comprehensive review. Int J Extreme Manuf. 2020;2:012004.
- Otsuka F, Kataoka Y, Miyazaki T. Enhanced osteoblast response to electrical discharge machining surface. Dent Mater J. 2012;31:309–315.
- Saadati A, Hesarikia H, Nourani MR, et al. Electrophoretic deposition of hydroxyapatite coating on biodegradable Mg–4Zn–4Sn–0.6Ca–0.5Mn alloy. Surf Eng. 2020;36:908–918.
- Umar Farooq M, Pervez Mughal M, Ahmed N, et al. On the investigation of surface integrity of Ti6Al4V ELI using Si-mixed electric discharge machining. Materials (Basel). 2020;13:1549.
- Esmailzadeh S, Aliofkhazraei M, Sarlak H. Interpretation of cyclic potentiodynamic polarization test results for study of corrosion behavior of metals: a review. Prot Met Phys Chem Surf. 2018;54:976–989.
- Xu W, Birbilis N, Sha G, et al. A high-specific-strength and corrosion-resistant magnesium alloy. Nat Mater. 2015;14:1229–1235.
- Bains PS, Bahraminasab M, Sidhu SS, et al. On the machinability and properties of Ti–6Al–4V biomaterial with n-HAp powder–mixed ED machining. Proc Inst Mech Eng Part H J Eng Med. 2020;234:232–242.
- Prakash C, Singh S, Wu LY, et al. Functional grading of surfaces through hybrid ultrasonic, abrasive water jet, and electric discharge machining processing. J Braz Soc Mech Sci Eng. 2021;43:210.
- Zhu Z, Guo D, Xu J, et al. Processing characteristics of micro electrical discharge machining for surface modification of TiNi shape memory alloys using a TiC powder dielectric. Micromachines (Basel). 2020;11:1018.
- Pourghorbani Dinachali K, Fadavieslam MR, Zavareh S. A study of the effect of the synthesis conditions of titanium dioxide on its morphology and cell toxicity properties. Arab J Chem. 2022;15:104022.
- Foroutan R, Peighambardoust SJ, Hosseini SS, et al. Hydroxyapatite biomaterial production from chicken (femur and beak) and fishbone waste through a chemical less method for Cd2+ removal from shipbuilding wastewater. J Hazard Mater. 2021;413:125428.
- Arjama M, Mehnath S, Rajan M, et al. Injectable cuttlefish HAP and macromolecular fibroin protein hydrogel for natural bone mimicking matrix for enhancement of osteoinduction progression. React Funct Polym. 2021;160:104841.