References
- Guo XP, Zhang G, Li WY, et al. Investigation of the microstructure and tribological behavior of cold-sprayed tin-bronze-based composite coatings. Appl Surf Sci. 2009;255(6):3822–3828. DOI:10.1016/j.apsusc.2008.10.041.
- Shehata F, Fathy A, Abdelhameed M, et al. Preparation and properties of Al2O3 nanoparticle reinforced copper matrix composites by in situ processing. Mater Design. 2009;30(7):2756–2762.
- Yang MS, Liu XB, Fan JW, et al. Microstructure and wear behaviors of laser clad NiCr/Cr3C2–WS2 high temperature self-lubricating wear-resistant composite coating. Appl Surf Sci. 2012;258(8):3757–3762. DOI:10.1016/j.apsusc.2011.12.021.
- Hariramkumar S, Natarajan S. Effect of duplex coating (VC–VN) on forming mandrel for better wear resistance. Surf Eng. 2021;37(1):42–51. DOI:10.1080/02670844.2020.1749787.
- Lancaster JK. Accelerated wear testing of PTFE composite bearing materials. Tribo Int. 1979;12(2):65–75. DOI:10.1016/0301-679X(79)90004-5.
- Sharma SC, Girish BM, Kamath R, et al. Graphite particles reinforced ZA-27 alloy composite materials for journal bearing applications. Wear. 1998;219(2):162–168. DOI:10.1016/S0043-1648(98)00188-4.
- Kagohara Y, Takayanagi S, Haneda S, et al. Tribological property of plain bearing with low frictional layer. Tribol Int. 2009;42:1800–1806. DOI:10.1016/j.triboint.2009.02.007.
- Grün F, G dor I, Gärtner W, et al. Tribological performance of thin overlays for journal bearings. Tribol Int. 2011;44:1271–1280. doi:10.1016/j.triboint.2010.10.027.
- Sankara Narayanan TSN. Surface pretretament by phosphate conversion coatings—a review. Rev Adv Mater Sci. 2005;9:130–177.
- Hager C, Evans R. Friction and wear properties of black oxide surfaces in rolling/sliding contacts. Wear. 2015;338-339:221–231.
- Elagouz A, Ali MKA, Xianjun H, et al. Frictional performance evaluation of sliding surfaces lubricated by zinc-oxide nano-additives. Surf Eng. 2020;36(2):144–157.
- Fattah-alhosseini A, Khan HY, Heidarpour A. Comparison of anti-corrosive properties between hot alkaline nitrate blackening and hydrothermal blackening routes. J Alloy Compd. 2016;676:474–480. DOI:10.1016/j.jallcom.2016.03.114.
- Stadler K, Han B, Brizmer V, et al. Benefits of using black oxidized bearings in wind applications. Evolution. 2015;2:25–30.
- Colaruotolo J, Tramontana D. Electroless plating. In: GO Mallory, JB Hajdu, editors. American electroplaters’ and surface. FL: Orlando: Finishers Society; 1990. p. 1.
- Manna M, Bandyopadhyay N, Bhattacharjee D. Effect of plating time for electroless nickel coating on rebar surface: an option for application in concrete structure. Surf Coat Technol. 2008;202(14):3227–3232. DOI:10.1016/j.surfcoat.2007.11.039.
- Manna M. Effect of high temperature oxide scale on steel surface for electroless nickel plating process and characterization of coatings. Surf Coat Technol. 2010;204(11):1842–1846. DOI:10.1016/j.surfcoat.2009.11.027.
- Vitry V, Francq E, Bonin L. Mechanical properties of heat-treated duplex electroless nickel coatings. Surf Eng. 2019;35(2):158–166. DOI:10.1080/02670844.2018.1463679.
- Manna M, Bandyopadhyay N. Electroless nickel coating kinetics on TMT rebar surface and coating characterisation. ISIJ Int. 2010;50(4):556–560. DOI:10.2355/isijinternational.50.556.
- Barker D. Electroless deposition of metals. Trans Inst Metal Finish. 1993;71:121–124. DOI:10.1080/00202967.1993.11871003.
- Duncan RN. The metallurgical structure of electroless nickel deposits: effect on coating properties. Surf Finish. 1983;10:64–68.
- Kerr C, Barker D, Walsh FC. Electroless deposition of metals. Trans Inst Metal Finish. 2001;79(1):41–46. DOI:10.1080/00202967.2001.11871359.
- Wang H, Xie M, Zong Q, et al. Electroless Ni–W–Cr–P alloy coating with improved electrocatalytic hydrogen evolution performance. Surf Eng. 2015;31(3):226–231. DOI:10.1179/1743294414Y.0000000373.
- Vafaei-Makhsoos E, Thomas EL, Toth LE. Electron microscopy of crystalline and amorphous Ni–P electrodeposited films: In-situ crystallization of an amorphous solid. Metall Trans. 1978;9:1449–1460. DOI:10.1007/BF02661817.
- Allen RM, Van der Sande JB. The structure of electroless Ni·P films as a function of composition. Scripta Metall. 1982;16:1161–1164. DOI:10.1016/0036-9748(82)90088-6.
- Wang LL, Chen HJ, Chen ZL. Study on post-treatments for electroless Ni–P coating. Surf Eng. 2011;27(1):57–60. DOI:10.1179/026708410X12550773058108.
- Hur KH, Jeong JH, Lee DN. Microstructures and crystallization of electroless Ni–P deposits. J Mater Sci. 1990;25:2573–2584. DOI:10.1007/BF00638061.
- Alhaji A, Shamanian M, Salehi M, et al. Electroless nickel–phosphorus plating on WC–Co powders using HVOF feedstock. Surf Eng. 2019;35(2):120–127. DOI:10.1080/02670844.2018.1477558.
- Balaraju JN, Seshadri SK. Synthesis and characterization of electroless nickel-high phosphorus coatings. Metal Finish. 1999;97(7):8–13. DOI:10.1016/S0026-0576(00)80593-0.
- Samanta S, Singh C, Banerjee A, et al. Development of amorphous Ni–P coating over API X70 steel for hydrogen barrier application. Coat. Technol. 2020; 403:126356. DOI:10.1016/j.surfcoat.2020.126356.
- Chakraborty S, Pandit A, Sarkar K, et al. Influence of cathodic polarity during electrocleaning process on the brown stain defect formation after skin pass on cold-rolled close annealed steel. Mater Corros. 2020;71(9):1500–1511. DOI:10.1002/maco.202011596.
- Singh AK, Rani N, Dutta S, et al. Electrolytic cleaning study of cold rolled steel using scanning Kelvin probe. Surf Eng. 2022;38(5):499–506. DOI:10.1080/02670844.2022.2101416.
- Zhang SL, Zhang XL, Zhang MM, et al. Effects of alkaline cleaners and cleaning methods on phosphate coating weight and surface morphology. Trans Inst Met Finish. 2010;88(4):220–224. DOI:10.1179/002029610X12734927543021.
- Xia Q, Qiu L, Yu S, et al. Effects of alkaline cleaning on the conversion and transformation of functional groups on ion-exchange membranes in polymer-flooding wastewater treatment: desalination performance, fouling behavior, and mechanism. Environ Sci Technol. 2019;53(24):14430–14440. DOI:10.1021/acs.est.9b05815.
- Zaki N. Electrocleaning. Metal Finish. 2006;104(7):102–107.
- Augustsson PE, Olefjord I, Olefjord Y. Electro-cleaning of cold rolled steel sheets. Surf Eng. 1986;2(4):277–282. DOI:10.1179/sur.1986.2.4.277.
- Zhu LZ, Liang YJ, Yang JH, et al. Investigation on the adhesion improvement of organic coatings on the surface of hot-dip galvanized steel. J Phys Conf Ser. 2020;1605(1):0012128. DOI:10.1088/1742-6596/1605/1/012128.
- Mihiş A, Danciu V, Salagean CA, et al. The effect of alkali and surfactant concentration, temperature and stirring on the cleaning efficiency of the carbon steel surface. Stud Univ Babeș-Bolyai Phys. 2021;66(1–2):79–90.
- Monteiro FJ, Barbosa MA, Gabe DR, et al. Surface pretreatments of aluminium for electroplating. Surf Coat Technol. 1988;35(3–4):321–331. DOI:10.1016/0257-8972(88)90045-X.
- Joshi S, Fahrenholtz WG, Keefe O, et al. Effect of alkaline cleaning and activation on aluminum alloy 7075-T6. Appl Surf Sci. 2011;257(6):1859–1863. DOI:10.1016/j.apsusc.2010.08.126.
- ASTM E 415-99a. ASTM International, 100 Barr Harbar drive, PO Box C700, West Conshohocken, PA 19428-2959, US; 2005.
- ASTM B117-03. ASTM International, 100 Barr Harbar drive, PO Box C700, West Conshohocken, PA 19428-2959, United States.
- ISO 281-07. Rolling bearings—Dynamic load ratings and rating life.