References
- Huang JC, Shen YD, Ho NJ, et al. Characterisation of electron beam welding of superplastic 8090 AI–Li alloys. Mater Sci Technol. 1994;10:647–658.
- Das P, Show BK, Rathore A, et al. Wear behavior of cooling slope rheocast A356 Al alloy. J Tribol Trans. 2015;58:1054–1066.
- Chandan M, Mukhopadhyay AK, Raghu T, et al. Extrusion processing of high-strength Al alloy 7055. Mater Manuf Process. 2007;22:424–428.
- Zhu L, Li N, Childs P. Light-weighting in aerospace component and system design. Propuls Power Res. 2018;7:103–119.
- Dalke A, Buchwalder A, Spies HJ, et al. EB surface alloying and plasma nitriding of different Al alloys. Mater Sci For. 2011;690:91–94.
- Jafari R, Farzaneh M. Fabrication of superhydrophobic nanostructured surface on aluminum alloy. Appl Phys A. 2011;102:195–199.
- Dehnavi V. Surface modification of aluminum alloys by plasma electrolytic oxidation [Ph.D. Thesis]. The University of Western Ontario, 2014.
- Almeida A, Vilar R. Laser surface alloying of aluminium-transition metal alloys. Rev de Metal. 1998;34:114–119.
- Jiang CP, Liu WQ, Wang G, et al. The corrosion behaviours of plasma-sprayed Fe-based amorphous coatings. Surf Eng. 2018;34:634–639.
- Li CY, Wang HB, Ding JQ, et al. Effects of heat treatment on HVOF-sprayed Fe-based amorphous coatings. Surf Eng. 2021;37:590–598.
- Ma HR, Li JW, Jiao J, et al. Wear resistance of Fe-based amorphous coatings prepared by AC-HVAF and HVOF. Mater Sci. Technol. 2017;33:65–71.
- Katakam S, Hwang J, Paital S, et al. In situ laser synthesis of Fe-based amorphous matrix composite coating on structural steel. Metall Mater Trans. 2012;43:4957–4966.
- Lee MW, Choi YS, Kwon DH, et al. The prediction of optimized metalloid content In Fe-Si-BP amorphous alloys using artificial intelligence algorithm. Arch Metall Mater. 2022;67(4):1539–1542.
- Duan J, Ji XL, Jin J, et al. Effect of cryogenic-thermal cycling treatment on tribological properties of Ti-based amorphous alloy. Mater Eng J. 2021;50:120–127.
- Jin J, Ji X, Cao S, et al. Effect of cryogenic thermal cycling on tribocorrosion performance of Fe-based bulk amorphous alloy in 3.5 Pct NaCl solution. Metall Mater Trans A. 2022;53:3404–3417.
- Liu H, Cai X, Zhi X, et al. An amorphous anode for proton battery. Nanomicro Lett. 2023;15:1–16.
- Zhang C, Zhou H, Liu L. Laminar Fe-based amorphous composite coatings with enhanced bonding strength and impact resistance. Acta Mater. 2014;72:239–251.
- Zhang HR, Wang SL, Yang XL, et al. Interfacial characteristic and microstructure of Fe-based amorphous coating on magnesium alloy. Surf Coat Technol. 2021;425:127659.
- Yao H, Zhou Z, Wang L, et al. Thermal conductivity and wear behavior of HVOF-sprayed Fe-based amorphous coatings. Coat. 2017;7:173.
- Zhou Z, Wang L, He DY, et al. Microstructure and electrochemical behavior of Fe-based amorphous metallic coatings fabricated by atmospheric plasma spraying. J Therm Spray Technol. 2011;20:344–350.
- Lin J, Wang Z, Cheng J, et al. Effect of initial surface roughness on cavitation erosion resistance of arc-sprayed Fe-based amorphous/nanocrystalline coatings. Coat. 2017;7:200.
- Fauchais P. Understanding plasma spraying. J. Phys D. 2004;37:R86.
- Kumar A, Nayak S, Sarkar K, et al. Investigation of nano-and micro-scale structural evolution and resulting corrosion resistance in plasma sprayed Fe-based (Fe-Cr-BCP) amorphous coatings. Surf Coat Technol. 2020;397:126058.
- Bijalwan P, Singh C, Kumar A, et al. Corrosion behaviour of plasma sprayed Fe based metallic glass (Fe73Cr2Si11B11C3 (at%) coatings in 3.5% NaCl solution. J Non Cryst Solids. 2021;567:120913.
- Liu G, An YL, Guo ZH, et al. Structure and corrosion behavior of iron-based metallic glass coatings prepared by LPPS. Appl Surf Sci. 2012;258:5380–5386.
- Maurya RS, Sahu A, Laha T. Quantitative phase analysis in Al86Ni8Y6 bulk glassy alloy synthesized by consolidating mechanically alloyed amorphous powder via spark plasma sintering. Mater Des. 2016;93:96–103.
- Fu BY, He DY, Zhao LD, et al. Microstructure and properties of arc sprayed coatings containing Fe based amorphous phase and nanocrystallites. Surf Eng. 2009;25:333–337.
- Bai Y, Zhao L, Wang Y, et al. Fragmentation of in-flight particles and its influence on the microstructure and mechanical property of YSZ coating deposited by supersonic atmospheric plasma spraying. Alloys Compd. 2015;632:794–799.
- Chen SY, He PF, Ma GZ, et al. Solidification mechanism and quantitative characterization of Fe-based amorphous splat formed by plasma sprayed droplets with different in-flight status. Alloys Compd. 2018;768:789–799.
- Thiyagarajan TK, Ananthapadmanabhan PV, Sreekumar KP, et al. Experimental and simulation approach to plasma spray deposition of yttrium oxide. Surf Eng. 2012;28:646–656.
- Gill BJ, Tucker RC. Plasma spray coating processes. Mater Sci Technol. 1986;2:207–213.
- Vardelle M, Fukumoto M, Vardelle A, et al. Knowledge concerning splat formation: an invited review. Therm Spray Technol. 2004;13:337–360.
- Sun YJ, Yang R, Xie L, et al. Interfacial bonding and corrosion behaviors of HVOF-sprayed Fe-based amorphous coating on 8090 Al-Li alloy. Surf Coat Technol. 2022;436:128316.
- Liu L, Zhang C. Fe-based amorphous coatings: structures and properties. Thin Solid Films. 2014;561:70–86.
- Zhang Y, Matthews S, Tran ATT, et al. Effects of interfacial heat transfer, surface tension and contact angle on the formation of plasma-sprayed droplets through simulation study. Surf Coat Technol. 2016;307:807–816.
- Johnson WL. Fundamental aspects of bulk metallic glass formation in multicomponent alloy. Mater Sci Forum. 1996;225:35–50.
- Duarte MJ, Klemm J, Klemm SO, et al. Element-resolved corrosion analysis of stainless-type glass-forming steels. Sci. 2013;341:372–376.
- Pardo A, Merino MC, Coy AE, et al. Pitting corrosion behaviour of austenitic stainless steels-combining effects of Mn and Mo additions. Corros Sci. 2008;50:1796–1806.
- Wang JQ, Zheng YG, Wang Y, et al. Corrosion of high-velocity oxy-fuel (HVOF) sprayed iron-based amorphous metallic coatings for marine pump in sodium chloride solutions. Mater Corros. 2012;63:685–694.
- Liu Q, Cheng J, Zhang L, et al. Corrosion behaviours of arc-sprayed AlSi-based amorphous/nanocrystalline coating. Surf Eng. 2021;37:606–617.
- Kumar A, Nayak SK, Bijalwan P, et al. Optimization of mechanical and corrosion properties of plasma sprayed low-chromium containing Fe-based amorphous/nanocrystalline composite coating. Surf Coat Technol. 2019;370:255–268.
- Bijalwan P, Kumar A, Nayak SK, et al. Microstructure and corrosion behavior of Fe-based amorphous composite coatings developed by atmospheric plasma spraying. Alloys Compd. 2019;796:47–54.
- Kumar A, Kumar R, Bijalwan P, et al. Fe-based amorphous/nanocrystalline composite coating by plasma spraying: effect of heat input on morphology, phase evolution and mechanical properties. Alloys Compd. 2019;771:827–837.
- Zhang HR, Wang SL, Li HX, et al. Effect of oxidation and crystallization on pitting initiation behavior of Fe-based amorphous coatings. Coat. 2022;12:176.
- Nayak SK, Kumar A, Pathak A, et al. Multi-scale mechanical properties of Fe-based amorphous/nanocrystalline composite coating synthesized by HVOF spraying. Alloys Compd. 2020;825:154120.
- Guo RQ, Zhang C, Chen Q, et al. Study of structure and corrosion resistance of Fe-based amorphous coatings prepared by HVAF and HVOF. Corros Sci. 2011;53:2351–2356.
- Zhang H, Xie YT, Huang LP, et al. Effect of feedstock particle sizes on wear resistance of plasma sprayed Fe-based amorphous coatings. Surf Coat Technol. 2014;258:495–502.
- Sadeghimeresht E, Markocsan N, Nylen P. Microstructural characteristics and corrosion behavior of HVAF-and HVOF-sprayed Fe-based coatings. Surf Coat Technol. 2017;318:365–373.
- Zhang CY, Chu ZH, Wei FS, et al. Optimizing process and the properties of the sprayed Fe-based metallic glassy coating by plasma spraying. Surf Coat Technol. 2017;319:1–5.
- Yasir M, Zhang C, Wang W, et al. Wear behaviors of Fe-based amorphous composite coatings reinforced by Al2O3 particles in air and in NaCl solution. Mater Des. 2015;88:207–213.