Effect of inorganic silicate sealing treatment on corrosion behaviour for HVAF sprayed Fe-based amorphous coatings

Reference

• Kwon J, Park H, Lee I, et al. Effect of gas flow rate on deposition behavior of Fe-based amorphous alloys in vacuum kinetic spray process. Surf Coat Technol. 2014;259:585–593. doi:10.1016/j.surfcoat.2014.10.026.
   Web of Science ®Google Scholar
• Zhai H, Ou M, Cui S, et al. Characterizations the deposition behavior and mechanical properties of detonation sprayed Fe-based amorphous coatings. Journal of Materials Research and Technology. 2022;18:2506–2518. doi:10.1016/j.jmrt.2022.03.140.
   Google Scholar
• Wang A, Zhao C, Men H, et al. Fe-based amorphous alloys for wide ribbon production with high Bs and outstanding amorphous forming ability. J Alloys Compd. 2015;630:209–213. doi:10.1016/j.jallcom.2015.01.056.
   Web of Science ®Google Scholar
• Zeng Z, Sakoda N, Tajiri T, et al. Structure and corrosion behavior of 316L stainless steel coatings formed by HVAF spraying with and without sealing. Surf Coat Technol. 2008;203(3–4):284–290. doi:10.1016/j.surfcoat.2008.09.011.
   Web of Science ®Google Scholar
• Ahmed N, Bakare MS, McCartney DG, et al. The effects of microstructural features on the performance gap in corrosion resistance between bulk and HVOF sprayed inconel 625. Surf Coat Technol. 2010;204(14):2294–2301. doi:10.1016/j.surfcoat.2009.12.028.
   Web of Science ®Google Scholar
• Guo RQ, Zhang C, Chen Q, et al. Study of structure and corrosion resistance of Fe-based amorphous coatings prepared by HVAF and HVOF. Corros Sci. 2011;53(7):2351–2356. doi:10.1016/j.corsci.2010.12.022.
   Web of Science ®Google Scholar
• Zhang SD, Zhang WL, Wang SG, et al. Characterisation of three-dimensional porosity in an Fe-based amorphous coating and its correlation with corrosion behaviour. Corros Sci. 2015;93:211–221. doi:10.1016/j.corsci.2015.01.022.
   Web of Science ®Google Scholar
• Zhou Z, Wang L, Wang F C, et al. Formation and corrosion behavior of Fe-based amorphous metallic coatings by HVOF thermal spraying. Surf Coat Technol. 2009;204(5):563–570. doi:10.1016/j.surfcoat.2009.08.025.
   Web of Science ®Google Scholar
• Wang Y, Jiang SL, Zheng YG, et al. Effect of processing parameters on the microstructures and corrosion behaviour of high-velocity oxy-fuel (HVOF) sprayed Fe-based amorphous metallic coatings. Mater Corros. 2013;64(9):801–810. doi:10.1002/maco.201106426.
   Web of Science ®Google Scholar
• Zhang SD, Wu J, Qi WB, et al. Effect of porosity defects on the long-term corrosion behaviour of Fe-based amorphous alloy coated mild steel. Corros Sci. 2016;110:57–70. doi:10.1016/j.corsci.2016.04.021.
   Web of Science ®Google Scholar
• Zhao W, Yu J, Hu M, et al. Effect of forced cooling on the microstructure and properties of Fe-based amorphous composite coatings prepared by laser remelting. Intermetallics. 2022;145:107552doi:10.1016/j.intermet.2022.107552.
   Web of Science ®Google Scholar
• Huang F, Kang J-J, Yue W, et al. Effect of heat treatment on erosion–corrosion of Fe-based amorphous alloy coating under slurry impingement. J Alloys Compd. 2020;820:153132. doi:10.1016/j.jallcom.2019.153132.
   Web of Science ®Google Scholar
• Wang Y, Jiang SL, Zheng YG, et al. Effect of porosity sealing treatments on the corrosion resistance of high-velocity oxy-fuel (HVOF)-sprayed Fe-based amorphous metallic coatings. Surf Coat Technol. 2011;206(6):1307–1318. doi:10.1016/j.surfcoat.2011.08.045.
   Web of Science ®Google Scholar
• Chu CL, Han X, Xue F, et al. Effects of sealing treatment on corrosion resistance and degradation behavior of micro-arc oxidized magnesium alloy wires. Appl Surf Sci. 2013;271:271–275. doi:10.1016/j.apsusc.2013.01.175.
   Web of Science ®Google Scholar
• Liu MM, Hu HX, Zheng YG. Effects of three sealing methods of aluminum phosphate sealant on corrosion resistance of the Fe-based amorphous coating. Surf Coat Technol. 2017;309:579–589. doi:10.1016/j.surfcoat.2016.12.033.
   Web of Science ®Google Scholar
• Mingo B, Arrabal R, Mohedano M, et al. Influence of sealing post-treatments on the corrosion resistance of PEO coated AZ91 magnesium alloy. Appl Surf Sci. 2018;433:653–667. doi:10.1016/j.apsusc.2017.10.083.
   Web of Science ®Google Scholar
• Hyung-Jun K, Sidoine O, Chang-Hee L, et al. The electrical insulation behavior and sealing effects of plasma-sprayed alumina titania coatings. Surf Coat Technol. 2001;140 (3):293–301.
   Web of Science ®Google Scholar
• Liscano S, Gil L, Staia MH. Effect of sealing treatment on the corrosion resistance of thermal-sprayed ceramic coatings. Surf Coat Technol. 2004;188:135–139. doi:10.1016/j.surfcoat.2004.08.009.
   Web of Science ®Google Scholar
• Li CL, Zhao HX, Takahashi T, et al. Improvement of corrosion resistance of materials coated with a Cr2O3/NiCr dilayer using a sealing treatment. Mater Sci Eng A. 2001;308:268–276.
   Web of Science ®Google Scholar
• Tan ALK, Soutar AM, Annergren IF, et al. Multilayer sol–gel coatings for corrosion protection of magnesium. Surf Coat Technol. 2005;198(1–3):478–482. doi:10.1016/j.surfcoat.2004.10.066.
   Web of Science ®Google Scholar
• Malayoglu U, Tekin KC, Shrestha S. Influence of post-treatment on the corrosion resistance of PEO coated AM50B and AM60B Mg alloys. Surf Coat Technol. 2010;205(6):1793–1798. doi:10.1016/j.surfcoat.2010.08.022.
   Web of Science ®Google Scholar
• Phuong NV, Fazal BR, Moon S. Cerium- and phosphate-based sealing treatments of PEO coated AZ31 Mg alloy. Surf Coat Technol. 2017;309:86–95. doi:10.1016/j.surfcoat.2016.11.055.
   Web of Science ®Google Scholar
• Shi P, Ng WF, Wong MH, et al. Improvement of corrosion resistance of pure magnesium in hanks’ solution by microarc oxidation with sol–gel TiO2 sealing. J Alloys Compd. 2009;469(1–2):286–292. doi:10.1016/j.jallcom.2008.01.102.
   Web of Science ®Google Scholar
• Jamali F, Danaee I, Zaarei D. Effect of nano-silica on the corrosion behavior of silicate conversion coatings on hot-dip galvanized steel. Mater Corros. 2015;66(5):459–464. doi:10.1002/maco.201407633.
   Web of Science ®Google Scholar
• Jiang L, Wolpers M, Volovitch P, et al. An atomic emission spectroelectrochemical study of passive film formation and dissolution on galvanized steel treated with silicate conversion coatings. Surf Coat Technol. 2012;206(13):3151–3157. doi:10.1016/j.surfcoat.2012.01.016.
   Web of Science ®Google Scholar
• Bahri H, Danaee I, Rashed GR, et al. Effect of silica ratio on the corrosion behavior of nano-silica potassium silicate coatings on aluminum alloy 2024. J Mater Eng Perform. 2015;24(2):839–847. doi:10.1007/s11665-014-1325-9.
   Web of Science ®Google Scholar
• Kazemi M, Danaee I, Zaarei D. Deposition and corrosion behavior of silicate conversion coatings on aluminum alloy 2024. Materialwiss Werkstofftech. 2014;45(7):574–581. doi:10.1002/mawe.201400212.
   Web of Science ®Google Scholar
• Kazemi M, Danaee I, Zaarei D. The effect of pre-anodizing on corrosion behavior of silicate conversion coating on AA2024. Mater Chem Phys. 2014;148(1–2):223–229. doi:10.1016/j.matchemphys.2014.07.038.
   Web of Science ®Google Scholar
• Bahri H, Danaee I, Rashed GR. The effect of curing time and curing temperature on the corrosion behavior of nanosilica modified potassium silicate coatings on AA2024. Surf Coat Technol. 2014;254:305–312. doi:10.1016/j.surfcoat.2014.06.041.
   Web of Science ®Google Scholar
• Canosa G, Alfieri PV, Giudice CA. Environmentally friendly, nano lithium silicate anticorrosive coatings. Prog Org Coat. 2012;73(2–3):178–185. doi:10.1016/j.porgcoat.2011.10.013.
   Web of Science ®Google Scholar
• Gao H, Li Q, Chen FN, et al. Study of the corrosion inhibition effect of sodium silicate on AZ91D magnesium alloy. Corros Sci. 2011;53(4):1401–1407. doi:10.1016/j.corsci.2011.01.008.
   Web of Science ®Google Scholar
• Gaggiano R, Moriamé P, Biesemans M, et al. Mechanism of formation of silicate thin films on porous anodic alumina. Surf Coat Technol. 2011;205(21–22):5210–5217. doi:10.1016/j.surfcoat.2011.05.029.
   Web of Science ®Google Scholar
• Gaggiano R, Moriamé P, Biesemans M, et al. Influence of SiO2/Na2O ratio and temperature on the mechanism of interaction of soluble sodium silicates with porous anodic alumina. Surf Coat Technol. 2011;206(6):1269–1276. doi:10.1016/j.surfcoat.2011.08.043.
   Web of Science ®Google Scholar
• Zhang RF, Zhang SF, Xiang JH, et al. Influence of sodium silicate concentration on properties of micro arc oxidation coatings formed on AZ91HP magnesium alloys. Surf Coat Technol. 2012;206(24):5072–5079. doi:10.1016/j.surfcoat.2012.06.018.
   Web of Science ®Google Scholar
• Li T-R, Wang D-B, Wang Q, et al. Susceptibility of passive film stability to the pore defect for HVAF-sprayed Fe-based amorphous coatings. J Therm Spray Technol. 2023. doi:10.1007/s11666-023-01540-2.
   PubMed Web of Science ®Google Scholar
• Wu J, Zhang SD, Sun WH, et al. Enhanced corrosion resistance in Fe-based amorphous coatings through eliminating Cr-depleted zones. Corros Sci. 2018;136:161–173. doi:10.1016/j.corsci.2018.03.005.
   Web of Science ®Google Scholar
• Tian W-P, Yang H-W, Zhang S-D. Synergistic effect of Mo, W, Mn and Cr on the passivation behavior of a Fe-based amorphous alloy coating. Acta Metallurgica Sinica (English Letters). 2018;31(3):308–320. doi:10.1007/s40195-017-0604-5.
   Web of Science ®Google Scholar
• Wang Q, Bai X, Sun B, et al. Influence of Si on tribological behavior of laser cladded Fe-based amorphous/crystalline composite coatings. Surf Coat Technol. 2021;405:126570. doi:10.1016/j.surfcoat.2020.126570.
   Web of Science ®Google Scholar