Investigation of tribological and corrosion performance of electroplated hard chromium coating on 17-4 PH steel

References

• Smith WF. Structure and properties of engineering alloys. 2nd ed. New York: McGraw-Hill Inc.; 1993.
   Google Scholar
• Rack HJ, Kalish D. The strength, fracture toughness, and low cycle fatigue behavior of 17-4 PH stainless steel. Metall Mater Trans B. 1974;5:1595–1605. doi:10.1007/BF02646331
   Web of Science ®Google Scholar
• Viswanathan UK, Banerjee S, Krishnan R. Effects of aging on the microstructure of 17-4 PH stainless steel. Mater Sci Eng A. 1988;104:181–189. doi:10.1016/0025-5416(88)90420-X
   Web of Science ®Google Scholar
• Charan JJ, Khan MA, Chawla DS, et al. Experimental stress analysis of seal disc of 500 MWe PHWR. BARC Report, 1996, BARC/1996/I/003.
   Google Scholar
• Bansal S, Bhattacharyya S, Patel RJ, et al. Design and development of face seal type sealing plug for advanced heavy water reactor. BARC Report, 2005, BARC/2005/E/022.
   Google Scholar
• Totlani MK, Grover AK, Athavale SN, et al. Functional plating. In: Rajagopal I, editor. International Workshop on Surface Engineering and Coatings. Bangalore: NAL; June 25–30, 1998. p. 151–159.
   Google Scholar
• Lucas JP. Valve materials performance observed in bench and simulated coal gasification /liquefaction testing. SANDIA REPORT, 1983, SAND82-2363.
   Google Scholar
• Daure JL, Carrington MJ, Shipway PH, et al. A Comparison of the galling wear behaviour of PVD Cr and electroplated hard Cr thin films. Surf Coat Technol. 2018;350:40–47. doi:10.1016/j.surfcoat.2018.06.070
   Web of Science ®Google Scholar
• Gawne DT, Ma U. Friction and wear of chromium and nickel coatings. Wear. 1989;129:123–142. doi:10.1016/0043-1648(89)90284-6
   Web of Science ®Google Scholar
• Tabrizi AT, Aghajani H, Laleh FF. Tribological study of thin-electroplated chromium: evaluation of wear rate as a function of surface roughness. Exp Tech. 2021;7:369–379. doi:10.1007/s40799-021-00502-z
   Google Scholar
• Fedrizzi L, Rossi S, Bellei F, et al. Wear–corrosion mechanism of hard chromium coatings. Wear. 2002;253:1173–1181. doi:10.1016/S0043-1648(02)00254-5
   Web of Science ®Google Scholar
• Bikulčius G, Češunienė A, Selskienė A, et al. Dry sliding tribological behavior of Cr coatings electrodeposited in trivalent chromium sulphate baths. Surf Coat Technol. 2017;315:130–138. doi:10.1016/j.surfcoat.2017.01.076
   Web of Science ®Google Scholar
• Gawne DT, Ma U. Engineering properties of chromium plating and electroless and electroplated nickel. Surf. Eng. 1988;4:239–249. doi:10.1179/sur.1988.4.3.239
   Google Scholar
• Mandich NV, Synder D. Electrodeposition of chromium. In: Schlesinger M, Paunovic M, editors. Modern electroplating; 5th ed. Hoboken: NJ: Wiley; 2010. p. 205–248.
   Google Scholar
• Dubpernell G. Chromium. In: Lowenheim FA, editor. Modern electroplating. 3rd ed. New York: John Wiley & Sons. Inc.; 1974. p. 80–129.
   Google Scholar
• Do Nascimento MP, Voorwald HJC. The significance and determination by image analysis of microcrack density in hard chromium plating. Plat Surf Finish. 2008;95:36–42.
   Google Scholar
• Failure Analysis and Prevention, American Society for Metals Handbook. Metals Park (OH): ASM International; 1993.
   Google Scholar
• Ali N, Fan QH, Gracio J, et al. Characterisation of stress and adhesion in diamond coatings deposited on Ti and Cr substrates using CVD. Surf Eng. 2002;18(4):260–264. doi:10.1179/026708402225005340
   Web of Science ®Google Scholar
• Larsson M, Olsson M, Hedenqvist P, et al. Mechanisms of coating failure a demonstrated by scratch and indentation testing of TiN coated HSS. Surf Eng. 2000;16(5):436–444. doi:10.1179/026708400101517350
   Web of Science ®Google Scholar
• Mehrotra PK, Quinto DT. Techniques for evaluating mechanical properties of hard coatings. J Vac Sci Technol A. 1985;3:2401–2405. doi:10.1116/1.572846
   Web of Science ®Google Scholar
• Gonczy ST. An ASTM standard for quantitative scratch adhesion testing of thin, hard ceramic coatings. Int J Appl Ceram Technol. 2005;2(5):422–428. doi:10.1111/j.1744-7402.2005.02043.x
   Web of Science ®Google Scholar
• Zagula-Yavorska M, Krupa K, Sieniawski J. Adhesion investigation of rhodium electroplated layers on nickel substrate. Adv Manufac Sci Technol. 2016;40(2):67–77. doi:10.2478/amst-2016-0011
   Google Scholar
• ASTM International. Standard test method for adhesion strength and mechanical failure modes of ceramic coatings by quantitative single point scratch testing. West Conshohocken (PA): ASTM C1624-05; 2010.
   Google Scholar
• Bull SJ. Can the scratch adhesion test ever be quantitative? In: Mittal KL, editor. Adhesion measurement of films and coatings, Vol 2. London: CRC Press; 1st ed.; 2001. p. 107–130.
   Google Scholar
• Blau PJ. Lab handbook of scratch testing. Oak Ridge (TN): Blue Rock Tech. Pub.; 2002. p. 1.2.
   Google Scholar
• Mekicha MA, De Rooij MB, Matthews DTA, et al. The effect of hard chrome plating on iron fines formation. Tribol Int. 2020;140:106003–106011. doi:10.1016/j.triboint.2019.106003
   Google Scholar
• Mahmud DNF, Abdollah MFB, Masripan NAB, et al. Influence of contact pressure and sliding speed dependence on the tribological characteristics of an activated carbon-epoxy composite derived from palm kernel under dry sliding conditions. Friction. 2019;7(3):227–236. doi:10.1007/s40544-018-0205-y
   Web of Science ®Google Scholar
• Ananth MP, Ramesh R. Reciprocating sliding wear performance of hard coating on modified titanium alloy surfaces, Tribol. Trans. 2015;58:169–176. doi:10.1080/10402004.2014.943338
   Google Scholar
• Mitrović S, Babić M, Adamović D, et al. Wear behaviour of hard Cr coatings for cold forming tools under dry sliding conditions. Tribol Industry. 2012;24:44–48.
   Google Scholar
• Lee L, Behera P, Sriraman KR, et al. The effect of contact stress on the sliding wear behaviour of Zn-Ni electrodeposited coatings. Wear. 2018;400-401:82–92. doi:10.1016/j.wear.2017.12.018
   Web of Science ®Google Scholar
• Wu M, Zhao Z, Wang X, et al. Corrosion behavior of 17–4 PH stainless steel in simulated marine environment. Mater Corr. 2018: 1–9. doi:10.1002/maco.201810454
   Google Scholar