Internal stress of high tungsten content Ni-W alloy coatings

References

• Podgornik B, Massler O, Kafexhiu F, et al. Crack density and tribological performance of hard-chrome coatings. Tribol Int. 2018;121:333–340. doi:10.1016/j.triboint.2018.01.055
   Web of Science ®Google Scholar
• Safavi MS, Walsh FC. Electrodeposited Co-P alloy and composite coatings: a review of progress towards replacement of conventional hard chromium deposits. Surf Coat Technol. 2021;422:127564, doi:10.1016/j.surfcoat.2021.127564
   Web of Science ®Google Scholar
• Huang L, Dong JX, Yang FZ, et al. Studies on the mechanism, structure and microhardness of Ni-W alloy electrodeposits. Trans IMF. 1999;77(5):185–187. doi:10.1080/00202967.1999.11871279
   Web of Science ®Google Scholar
• Hosseini MG, Abdolmaleki M, Ghahremani J. Investigation of corrosion resistance of electrodeposited Ni–W/SiC composite coatings. Corros Eng Sci Technol. 2014;49(4):247–253. doi:10.1179/1743278213Y.0000000120
   Web of Science ®Google Scholar
• Garcia-Urrutia I, Jones LA, Diez JA, et al. Effect of bath stabiliser on performance of electrodeposited Ni–W coatings. Trans IMF. 2011;89(3):132–136. doi:10.1179/174591911X13013072274273
   Web of Science ®Google Scholar
• Hosseini MG, Abdolmaleki M, Seyed Sadjadi SA, et al. Electrodeposition of Ni–W–B nanocomposite from tartrate electrolyte as alternative to chromium plating. Surf Eng, 2009, 25(5): 382-388. doi:10.1179/026708408X343609
   Web of Science ®Google Scholar
• Imaz N, Díez JA, Ostra M, et al. Advanced Ni–W coatings obtained by the combination of pulse plating and chemometric techniques. Trans IMF. 2014;92(6):305–315. doi:10.1179/0020296714Z.000000000214
   Web of Science ®Google Scholar
• Ábel M, Záchenská J, Dobročka E, et al. Electrocatalytic properties of pulse plated Ni-W alloy coatings in alkaline electrolytes. Trans IMF. 2021;99(1):23–28. doi:10.1080/00202967.2020.1841453
   Google Scholar
• Panagopoulos CN, Plainakis GD, Giannakopoulos KI. Adhesion of electrodeposited nanocrystalline Ni–W coatings on Cu. Trans IMF. 2018;96(1):46–51. doi:10.1080/00202967.2018.1403102
   Web of Science ®Google Scholar
• Dilek S, Algül H, Akyol A, et al. Pulse electro co-deposition of submicron-sized TiC reinforced Ni–W coatings: tribological and corrosion properties. J Asian Ceram Soc. 2021;9(2):673–685. doi:10.1080/21870764.2021.1911058
   Web of Science ®Google Scholar
• Detor AJ, Miller MK, Schuh CA. Solute distribution in nanocrystalline Ni–W alloys examined through atom probe tomography. Philos Mag. 2006;86(28):4459–4475. doi:10.1080/14786430600726749
   Web of Science ®Google Scholar
• Suvorov DV, Gololobov GP, Tarabrin DY, et al. Electrochemical deposition of Ni–W crack-free coatings. Coatings. 2018;8(7):233, doi:10.3390/coatings8070233
   Web of Science ®Google Scholar
• Allahyarzadeh M, Aliofkhazraei M, Rouhaghdam AS, et al. Electrodeposition of multilayer Ni–W and Ni–W-alumina nanocomposite coatings. Surf Eng. 2017;33(5):327–336. doi:10.1080/02670844.2016.1277640
   Web of Science ®Google Scholar
• Arunsunai Kumar K, Paruthimal Kalaignan G, Muralidharan VS. Enhanced corrosion resistance of Ni–W alloy with inclusion of TiN nanoparticles by electrodeposition method. Trans IMF. 2013;91(4):202–206. doi:10.1179/0020296713Z.000000000110
   Web of Science ®Google Scholar
• Druga J, Kašiarová M, Dobročka E, et al. Corrosion and tribological properties of nanocrystalline pulse electrodeposited Ni–W alloy coatings. Trans IMF. 2017;95(1):39–45. doi:10.1080/00202967.2017.1262117
   Web of Science ®Google Scholar
• Wasekar NP, Gowthami S, Jyothirmayi A, et al. Corrosion behaviour of compositionally modulated nanocrystalline Ni–W coatings. Surf Eng. 2020;36(9):952–959. doi:10.1080/02670844.2019.1660035
   Web of Science ®Google Scholar
• Feng-jiao HE, Miao W, Xin L. Properties of electrodeposited amorphous Fe-Ni-W alloy deposits. Trans Nonferrous Met Soc China. 2006;16(6), doi:10.1016/S1003-6326(07)60008-9
   Web of Science ®Google Scholar
• Long X, Hang T, Guo Y, et al. Influence of intercolony boundary on corrosion behavior of electrodeposited Ni–W alloy for electronic connector applications. Mater Chem Phys. 2020;239:121989, doi:10.1016/j.matchemphys.2019.121989
   Web of Science ®Google Scholar
• Matsui I, Watanabe A, Uesugi T, et al. Mechanical properties and microstructures after abnormal grain growth in electrodeposited Ni–W alloys. Materialia. 2019;8:100481, doi:10.1016/j.mtla.2019.100481
   Web of Science ®Google Scholar
• Younes EG. Electroplating of high tungsten content Ni/W alloys. Electrochem Solid-State Lett. 2000;3(12), doi:10.1149/1.1391203
   Google Scholar
• Liu W, Li D. Study of internal stress of amorphous Ni–W alloy films. Mater Sci Technol. 2009;25(8), doi:10.1179/174328408X311071
   Web of Science ®Google Scholar
• Pramod Kumar U, Joseph Kennady C. Effect of benzaldehyde on the electrodeposition and corrosion properties of Ni–W alloys. Int J Min er Metall Mater. 2015;22(10), doi:10.1007/s12613-015-1168-x
   Google Scholar
• Yang F, Guo YF, Huang L, et al. Electrodeposition, structure and corrosion resistance of nanocrystalline Ni-W alloy. Chin J Chem. 2004;22(3), doi:10.1002/cjoc.20040220303
   PubMed Web of Science ®Google Scholar
• Mizushima I, Tang PT, Hansen HN, et al. Development of a new electroplating process for Ni–W alloy deposits. Electrochim Acta. 2005;51(5), doi:10.1016/j.electacta.2005.04.050
   Web of Science ®Google Scholar
• Nagai T, Hodouchi K, Matsubara H. Relationship between film composition and microhardness of electrodeposited Ni–W–B films prepared using a citrate–glycinate bath. Surf Coat Technol. 2014;253; doi:10.1016/j.surfcoat.2014.05.022
   Web of Science ®Google Scholar
• Yamasaki T. High-strength nanocrystalline Ni-W alloys produced by electrodeposition and their embrittlement behaviors during grain growth. Scr Mater. 2001;44(8-9):1497–1502. doi:10.1016/S1359-6462(01)00720-5
   Web of Science ®Google Scholar
• Nia NS, Creus J, Feaugas X, et al. Influence of metallurgical parameters on the electrochemical behavior of electrodeposited Ni and Ni–W nanocrystalline alloys. Appl Surf Sci. 2016;370:149–159. doi:10.1016/j.apsusc.2016.02.101
   Web of Science ®Google Scholar
• Ziebell TD, Schuh CA. Residual stress in electrodeposited nanocrystalline nickel-tungsten coatings. J Mater Res. 2012;27(9):1271–1284. doi:10.1557/jmr.2012.51
   Web of Science ®Google Scholar
• Beltowska-Lehman E, Bigos A, Szczerba MJ, et al. Heat treatment of ultrasonic electrodeposited Ni-W/ZrO2 nanocomposites. Surf Coat Technol. 2020;393:125779, doi:10.1016/j.surfcoat.2020.125779
   Web of Science ®Google Scholar
• Allahyarzadeh MH, Aliofkhazraei M, Rezvanian AR, et al. Ni-W electrodeposited coatings: characterization, properties and applications. Surf Coat Technol. 2016;307:978–1010. doi:10.1016/j.surfcoat.2016.09.052
   Web of Science ®Google Scholar
• Juškėnas R, Valsiūnas I, Pakštas V, et al. On the state of W in electrodeposited Ni–W alloys. Electrochim Acta. 2009;54(9):2616–2620. doi:10.1016/j.electacta.2008.10.060
   Web of Science ®Google Scholar
• Kabi S, Raeissi K, Saatchi A. Effect of polarization type on properties of Ni–W nanocrystalline electrodeposits. J Appl Electrochem. 2009;39(8):1279–1285. doi:10.1007/s10800-009-9796-3
   Web of Science ®Google Scholar
• Marvel CJ, Cantwell PR, Harmer M. The critical influence of carbon on the thermal stability of nanocrystalline Ni–W alloys. Scr Mater. 2015;96:45–48. doi:10.1016/j.scriptamat.2014.10.022
   Web of Science ®Google Scholar
• Aykac B, Erdogan M, Karakaya I. Determination of internal stress of Ni electroplated samples in sulphamate solutions. ECS Trans. 2017;77(11):1079, doi:10.1149/07711.1079ecst
   Google Scholar
• Liu J, Xu B, Wang H, et al. Effects of film thickness and microstructures on residual stress. Surf Eng. 2016;32(3):178–184. doi:10.1179/1743294415Y.0000000028
   Web of Science ®Google Scholar
• Beltowska-Lehman E, Indyka P, Bigos A, et al. Effect of hydrodynamic conditions of electrodeposition process on microstructure and functional properties of Ni-W/ZrO2 nanocomposites. J Electroanal Chem. 2016;775:27–36. doi:10.1016/j.jelechem.2016.05.003
   Web of Science ®Google Scholar
• Mézin A, Hemel A. Measuring coating internal stresses by the curvature method applied to a beveled sample. Surf Coat Technol. 2014;258:1128–1136. doi:10.1016/j.surfcoat.2014.07.021
   Web of Science ®Google Scholar
• Mizushima I, Tang PT, Hansen HN, et al. Residual stress in Ni–W electrodeposits. Electrochim Acta. 2006;51(27):6128–6134. doi:10.1016/j.electacta.2005.11.053
   Web of Science ®Google Scholar
• Fabro MA, Mena M. Effect of organic plating additives concentration on carbon content and donor density of electroplated Tin[C]. IOP Conf Ser: Mater Sci Eng. 2019;540(1):012002, doi:10.1088/1757-899X/540/1/012002
   Google Scholar
• Kumar UP, Shanmugan S, Kennady CJ, et al. Anti-corrosion and microstructural properties of Ni–W alloy coatings: effect of 3, 4-Dihydroxybenzaldehyde. Heliyon. 2019;5(3):e01288, doi:10.1016/j.heliyon.2019.e01288
   PubMed Web of Science ®Google Scholar
• Wasekar N. The influence of grain size and triple junctions on corrosion behavior of nanocrystalline Ni and Ni-W alloy. Scr Mater. 2022;213:114604, doi:10.1016/j.scriptamat.2022.11460
   Web of Science ®Google Scholar