References
- Zhao LQ, Hu HX, Zheng YG, et al. Behavior and mechanism of slurry erosion to grooved surface at different angles. Colloids Surf A: Physicochem Eng. 2023;656:130410, doi:10.1016/j.colsurfa.2022.130410
- Singh V, Bansal A, Singla AK. Slurry erosion behaviour of HVOF sprayed VC + TiC based novel coatings: characterization and optimization studies. Tribol Int. 2023;180:108289, doi:10.1016/j.triboint.2023.108289
- Kumar A, Garg RK, Sachdeva A. Performance of thermally sprayed nickel and tungsten-based coatings in slurry erosion conditions: a review. J Tribol. 2023;145(9). doi:10.1115/1.4062372
- Chen W, Zhao Y, Borja RI. Solid–fluid interaction in porous materials with internal erosion. Acta Geotech. 2023: 1–18. doi:10.1007/s11440-023-01906-4
- Lv J, Wu Y, Hong S, et al. Erosion behavior and mechanism of the HVOF-sprayed (AlCoCrFeNi)/(WC-10Co)1- composite coatings at different slurry sand concentrations. Int J Refract Met Hard Mater. 2023;110:106011, doi:10.1016/j.ijrmhm.2022.106011
- Singh V, Singla AK, Bansal A. Influence of TiC content on slurry erosion behaviour of HVOF sprayed titanium carbide and cupronickel-chromium based coatings. J Therm Spray Technol. 2023;32(6):1739–1757. doi:10.1007/s11666-023-01613-2
- Ozkan D. Structural characteristics and wear, oxidation, hot corrosion behaviors of HVOF sprayed Cr3C2-NiCr hardmetal coatings. Surf Coat Technol. 2023;457:129319, doi:10.1016/j.surfcoat.2023.129319
- Kumar K, Kumar S, Gill HS. Role of surface modification techniques to prevent failure of components subjected to the fireside of boilers. J Fail Anal Prev. 2022;23(1):1–15. doi:10.1007/s11668-022-01556-w
- Sharma RK, Das RK, Kumar SR. Hvof deposition, comparative investigation and optimum selection of molybdenum, boron, chromium, and titanium in iron amorphous composite coatings. Surf Eng. 2023;39(4):481–494. doi:10.1080/02670844.2023.2233263
- Srikanth A, Bolleddu V. Characteristics of reduced graphene oxide (rGO) mixed HVOF-sprayed nanostructured coatings. Surf Eng. 2023;39(4):421–432. doi:10.1080/02670844.2023.2232967
- Erfanmanesh M, Shoja-Razavi R, Barekat M, et al. High-temperature wear behavior of HVOF sprayed, laser glazed, and laser cladded stellite 6 coatings on stainless steel substrate. J Adhes Sci Technol. 2022: 1–21. doi:10.1080/01694243.2022.2140885
- Li N, Kingkam W, Bao ZM, et al. Effect of alloying elements on mechanical properties of high-strength low-alloy steel. Mater Sci Forum. 2020;1007:41–46.
- Rakhes M, Koroleva E, Liu Z. Improvement of corrosion performance of HVOF MMC coatings by laser surface treatment. Surf Eng. 2011;27(10):729–733. doi:10.1179/1743294411y.0000000001
- Wang Z, Song J, Wang T, et al. Laser texturing for superwetting titanium alloy and investigation of its erosion resistance. Coatings. 2021;11(12):1547, doi:10.3390/coatings11121547
- Patil D, Aravindan S, Sarathi R, et al. Fabrication of self-cleaning superhydrophobic silicone rubber insulator through laser texturing. Surf Eng. 2020;37(3):308–317. doi:10.1080/02670844.2020.1780673
- Shrivastava S, Kumar V, Verma R, et al. Flexural and corrosion behaviour of WC-10Co-4Cr + graphene sprayed on textured HSLA-steel. Surf Eng. 2023;39(4):457–472. doi:10.1080/02670844.2023.2232970
- Kumar V, Singh NK, Verma R, et al. Corrosion behaviour of laser textured and WCCoCr + GNPs coated IS-2062 steel. Diam Relat Mater. 2023;136:109958, doi:10.1016/j.diamond.2023.109958
- Kumar V, Verma R. Slurry and sliding wear characterisation of HVOF sprayed WC10Co4Cr + graphene coating on textured marine steel. Tribol Int. 2023;184:108489, doi:10.1016/j.triboint.2023.108489
- Singh H, Sodhi GPS, Singh M, et al. Study: wear and superhydrophobic behaviour of PTFE-ceria composite. Surf Eng. 2018;35(6):550–556. doi:10.1080/02670844.2018.1499176
- Kumar Y, Kumar A, Siddhartha. Insights to improve the tribo-performance of materials used under slurry erosion applications: a review. Proc Inst Mech Eng L. 2022;237(1):3–32. doi:10.1177/14644207221108565
- Bansal A, Singh J, Singh H. Erosion behavior of hydrophobic polytetrafluoroethylene (PTFE) coatings with different thicknesses. Wear. 2020;456–457:203340, doi:10.1016/j.wear.2020.203340
- Kumar R, Malaval B, Antonov M, et al. Performance of polyimide and PTFE based composites under sliding, erosive and high stress abrasive conditions. Tribol Int. 2020;147:106282, doi:10.1016/j.triboint.2020.106282
- Singh V, Bansal A, Singla AK. Response surface methodology (RSM) based analysis on slurry erosion behavior of laser textured and PTFE sprayed VC + TiC coating deposited via HVOF. Mater Today Commun. 2023: 106843, doi:10.1016/j.mtcomm.2023.106843
- Pharr GM, Oliver WC. Measurement of thin film mechanical properties using nanoindentation. MRS Bull. 1992;17(7):28–33. doi:10.1557/s0883769400041634