Evaluation of thin-layer models for describing drying kinetics of poplar wood particles in a fluidized bed dryer

References

• Aghbashlo, M., M. H. Kianmehr, and H. Samimi-Akhijahani. 2008. Influence of drying conditions on the effective moisture diffusivity, energy of activation and energy consumption during the thin-layer drying of beriberi fruit (Berberidaceae). Energy Conversion and Management 49:2865–71. doi:10.1016/j.enconman.2008.03.009
   Web of Science ®Google Scholar
• Bahadori, A., G. Zahedi, S. Zendehboudi, and A. Jamili. 2014. Estimation of the effect of biomass moisture content on the direct combustion of sugarcane bagasse in boilers. International Journal of Sustainable Energy 33 (2):349–56. doi:10.1080/14786451.2012.748766
   Google Scholar
• Balatinecz, J. J., and D. E. Kretschmann. 2001. Properties and utilization of poplar wood. Poplar Culture in North America 277–91.
   Google Scholar
• Bacelos, M. S., C. D. F. Jesus, and J. T. Freire. 2009. Modeling and drying of carton packaging waste in a rotary dryer. Drying Technology 27 (9):927–37. doi:10.1080/07373930902901695
   Web of Science ®Google Scholar
• Bero, B. N., A. Reiboldt, W. Davis, N. Bedard, and E. Russell. 2011. Low temperature fluidized wood chip drying with monoterpene analysis. European Journal of Wood and Wood Products 69 (4):545–52. Ottawa, Canada: NRC Research Press. doi:10.1007/s00107-010-0519-6
   Web of Science ®Google Scholar
• Bhattarai, S., J. H. Oh, S. H. Euh, D. H. Kim, and L. Yu. 2014. Simulation study for pneumatic conveying drying of sawdust for pellet production. Drying Technology 32 (10):1142–56. doi:10.1080/07373937.2014.884575
   Web of Science ®Google Scholar
• Bruchmüller, J., B. G. M. van Wachem, S. Gu, K. H. Luo, and R. C. Brown. 2012. Modeling the thermochemical degradation of biomass inside a fast pyrolysis fluidized bed reactor. AIChE Journal 58 (10):3030–42. doi:10.1002/aic.13705
   Web of Science ®Google Scholar
• Chayjan, R. A., K. Salari, Q. Abedi, and A. A. Sabziparvar. 2013. Modeling moisture diffusivity, activation energy and specific energy consumption of squash seeds in a semi fluidized and fluidized bed drying. Journal of Food Science and Technology 50 (4):667–77.
   PubMed Web of Science ®Google Scholar
• Cluet, B., G. Mauviel, Y. Rogaume, O. Authier, and A. Delebarre. 2015. Segregation of wood particles in a bubbling fluidized bed. Fuel Processing Technology 133:80–88. doi:10.1016/j.fuproc.2014.12.045
   Web of Science ®Google Scholar
• Delele, M. A., F. Weigler, and J. Mellmann. 2015. Advances in the application of a rotary dryer for drying of agricultural products: A review. Drying Technology 33 (5):541–58. doi:10.1080/07373937.2014.958498
   Web of Science ®Google Scholar
• Diamente, L. M., and P. A. Munro. 1991. Mathematical modeling of hot air drying of sweet potato slices. International Journal of Food Science and Technology 26:99–109. doi:10.1111/j.1365-2621.1991.tb01145.x
   Web of Science ®Google Scholar
• Doymaz, I. 2004. Effect of pre-treatments using potassium metabisulphide and alkaline ethyl oleate on the drying kinetics of apricots. Biosystems Engineering 89:281–87. doi:10.1016/j.biosystemseng.2004.07.009
   Web of Science ®Google Scholar
• Fritzell, E., O. Melander, A. Rasmuson. 2009. The drying kinetics and equilibrium moisture content of MDF fibers. Dry. Technol 27 (9):993–998.
   Web of Science ®Google Scholar
• Foroughi-Dahr, M., M. Golmohammadi, R. Pourjamshidian, M. Rajabi-Hamaneh, and S. J. Hashemi. 2015. On the characteristics of thin-layer drying models for intermittent drying of rough rice. Chemical Engineering Communications 202 (8):1024–35. doi:10.1080/00986445.2014.900049
   Web of Science ®Google Scholar
• Gazor, H. R., and A. Mohsenimanesh. 2010. Modelling the drying kinetics of canola in fluidised bed dryer. Czech Journal of Food Sciences 28 (6):531–37.
   Web of Science ®Google Scholar
• Goyal, R. K., A. R. P. Kingsly, M. R. Manikantan, and S. M. Ilyas. 2007. Mathematical modeling of thin layer drying kinetics of plum in a tunnel dryer. Journal of Food Engineering 79:176–80. doi:10.1016/j.jfoodeng.2006.01.041
   Web of Science ®Google Scholar
• Gu, X., C. Liu, X. Jiang, X. Ma, L. Li, K. Cheng, and Z. Li. 2014. Thermal behavior and kinetics of the pyrolysis of the raw/steam exploded poplar wood sawdust. Journal of Analytical and Applied Pyrolysis 106:177–86. doi:10.1016/j.jaap.2014.01.018
   Web of Science ®Google Scholar
• Henderson, S. M., and S. Pabis. 1961. Grain drying theory I. Temperature effect on drying coefficient. Journal of Agriculture Engineering Research 6 (3):169–74.
   Google Scholar
• Holmberg, H. 2007. Biofuel drying as a concept to improve the energy efficiency of an industrial CHP plant. Dissertation, Helsinki University of Technology.
   Google Scholar
• Holmberg, H., P. Ahtila, and O. Ahtila. 2011. Experimental study on drying of bark in fixed beds. Drying Technology 29 (8):953–60. doi:10.1080/07373937.2010.551305
   Web of Science ®Google Scholar
• Karathanos, V. T. 1999. Determination of water content of dried fruits by drying kinetics. Journal of Food Engineering 39:337–44. doi:10.1016/S0260-8774(98)00132-0
   Web of Science ®Google Scholar
• Kannan, C. S., and N. B. Subramanian. 2009. Drying kinetics of saw dust in tray dryer. Journal of Sustainable Development 1 (3):123. doi:10.5539/jsd.v1n3p123
   Google Scholar
• Khanali, M., and S. Rafiee. 2014. Investigation of hydrodynamics, kinetics, energetic and exergetic aspects of fluidized bed drying of rough rice. International Journal of Food Engineering 10 (1):39–50. doi:10.1515/ijfe-2012-0116
   Web of Science ®Google Scholar
• Khanali, M., S. Rafiee, and A. Jafari. 2014. Numerical simulation and experimental investigation of plug-flow fluidized bed drying under dynamic conditions. Journal of Food Engineering 137:64–75. doi:10.1016/j.jfoodeng.2014.03.020
   Web of Science ®Google Scholar
• Khanali, M., R. Sh, A. Jafari, S. H. Hashemabadi, and A. Banisharif. 2012. Mathematical modeling of fluidized bed drying of rough rice (Oryza sativa L.) grain. Journal of Agricultural Technology 8 (3):795–810.
   Google Scholar
• Lewis, W. K. 1921. The rate of drying of solid materials. Journal of Industrial & Engineering Chemistry 13:427–32. doi:10.1021/ie50137a021
   Google Scholar
• Li, H., Q. Chen, X. Zhang, K. N. Finney, V. N. Sharifi, and J. Swithenbank. 2012. Evaluation of a biomass drying process using waste heat from process industries: A case study. Applied Thermal Engineering 35:71–80. doi:10.1016/j.applthermaleng.2011.10.009
   Web of Science ®Google Scholar
• Liu, Y., J. Peng, Y. Kansha, M. Ishizuka, A. Tsutsumi, D. Jia, X. T. Bi, C. J. Lim, and S. Sokhansanj. 2014. Novel fluidized bed dryer for biomass drying. Fuel Processing Technology 122:170–75. doi:10.1016/j.fuproc.2014.01.036
   Web of Science ®Google Scholar
• Melander, O., and A. Rasmuson. 2010. Mathematical modeling of heat, mass, and momentum transport in MDF fiber drying. Drying Technology 29 (1):64–72. doi:10.1080/07373937.2010.482712
   Web of Science ®Google Scholar
• Meziane, S. 2011. Drying kinetics of olive pomace in a fluidized bed dryer. Energy Conversion and Management 52 (3):1644–49. doi:10.1016/j.enconman.2010.10.027
   Web of Science ®Google Scholar
• Miao, Q., J. Zhu, S. Barghi, C. Wu, X. Yin, and Z. Zhou. 2013. Modeling biomass gasification in circulating fluidized beds. Renewable Energy 50:655–61. doi:10.1016/j.renene.2012.08.020
   Web of Science ®Google Scholar
• Midilli, A., H. Kucuk, and Z. Yapar. 2002. A new model for single-layer drying. Drying Technology 20:1503–13. doi:10.1081/DRT-120005864
   Web of Science ®Google Scholar
• Milota, M. R., and J. B. Wilson. 1990. Engineering analysis of the drying of wood particles in a fluidized bed. Wood and Fiber Science 22 (2):193–203.
   Web of Science ®Google Scholar
• Minea, V. 2004. Heat pumps for wood drying: New developments and preliminary results. Maderas. Ciencia y tecnología 6 (2):123–32. doi:10.4067/s0718–221x2004000200003
   Google Scholar
• Motevali, A., S. Younji, R. A. Chayjan, N. Aghilinategh, and A. Banakar. 2013. Drying kinetics of dill leaves in a convective dryer. International Agrophysics 27 (1):39–47.
   Web of Science ®Google Scholar
• Nadhari, W. N. A., R. Hashim, M. Danish, O. Sulaiman, and S. Hiziroglu. 2014. A model of drying kinetics of Acacia mangium wood at different temperatures. Drying Technology 32 (3):361–70. doi:10.1080/07373937.2013.829855
   Web of Science ®Google Scholar
• Pang, S., S. G. Riley, A. N. Haslett. 1997. Simulation of pinus radiata veneer drying: Moisture content and temperature profiles. For. Prod. J. 47 (7–8):51–58.
   Web of Science ®Google Scholar
• Panwar, N. L., S. C. Kaushik, and S. Kothari. 2011. Role of renewable energy sources in environmental protection: A review. Renewable and Sustainable Energy Reviews 15 (3):1513–24. doi:10.1016/j.rser.2010.11.037
   Web of Science ®Google Scholar
• Phanphanich, M., and S. Mani. 2009. Drying characteristics of pine forest residues. Bioresources 5 (1):108–20.
   Web of Science ®Google Scholar
• Pletney, V. 2007. Focus on food engineering research and developments. New York: Nova Science Publishers, Inc.
   Google Scholar
• Polanco, L. S., V. Kochergin, and J. F. Alvarez. 2013. Fluidized bed superheated steam dryer for bagasse: Effects of particle size distribution. Journal of Sustainable Bioenergy Systems 3 (04):265. doi:10.4236/jsbs.2013.34036
   Google Scholar
• Rafiee, S., A. Keyhani, M. Sharifi, A. Jafari, H. Mobli, and A. Tabatabaeefar. 2009. Thin layer drying properties of soybean (Viliamz Cultivar). Journal of Agricultural Science and Technology 11:289–300.
   Web of Science ®Google Scholar
• Rahman, M. S., C. O. Perera, and C. Thebaud. 1998. Desorption isotherm and heat pump drying kinetics of peas. Food Research International 30 (7):485–91. doi:10.1016/S0963-9969(98)00009-X
   Web of Science ®Google Scholar
• Roos, C. J. 2008. Biomass drying and dewatering for clean heat & power. Washington, USA: Northwest CHP Application Centers.
   Google Scholar
• Routa, J., M. Kolström, J. Ruotsalainen, and L. Sikanen. 2015. Precision measurement of forest harvesting residue moisture change and dry matter losses by constant weight monitoring. International Journal of Forest Engineering 26 (1):71–83. doi:10.1080/14942119.2015.1012900
   Google Scholar
• Sander, A., J. P. Kardum, and D. Skansi. 2001. Transport properties in drying of solids. Chemical and Biochemical Engineering Quarterly 15 (3):131–38.
   Web of Science ®Google Scholar
• Sarı, B., G. Nemli, N. Ayrilmis, M. Baharoğlu, and S. Bardak. 2013. The influences of drying temperature of wood particles on the quality properties of particleboard composite. Drying Technology 31 (1):17–23. doi:10.1080/07373937.2012.711791
   Web of Science ®Google Scholar
• Scheufele, F. B., C. Ribeiro, A. P. Modenes, F. Q. Rodolfo, R. Bergamasco, and N. Pereira. 2015. Assessment of drying temperature of sugarcane bagasse on sorption of reactive blue 5 G dye. Fibers and Polymers 16 (8):1646–56. doi:10.1007/s12221-015-5087–2
   Web of Science ®Google Scholar
• Senadeera, W., B. R. Bhandari, G. Young, B. Wijesinghe. 2005. Modeling dimensional shrinkage of shaped foods in fluidized bed drying. J. Food Process Preserv. 29:109–119.
   Web of Science ®Google Scholar
• Shelly, J. R. 2011. Woody biomass factsheet–WB1. Berkeley: University of California.
   Google Scholar
• Soni, S. K. 2007. A source of energy for 21st century. New Delhi: New India Pub.
   Google Scholar
• Sridhar, D., and G. M. Madhu. 2015. Drying kinetics and mathematical modeling of Casuarina Equisetifolia wood chips at various temperatures. Periodica Polytechnica Chemical Engineering. 59 (4):288–95. doi:10.3311/PPch.7855
   Web of Science ®Google Scholar
• Verma, L. R., R. A. Bucklin, J. B. Endan, and F. T. Wratten. 1985. Effects of drying air parameters on rice drying models. Transactions of the ASAE 28:296–301. doi:10.13031/2013.32245
   Google Scholar
• Wang, C. Y., and R. P. Singh. 1978. A thin layer drying equation for rough rice. American Society of Agricultural Engineers (ASAE) Paper No. 78–3001, St. Joseph, MI, USA.
   Google Scholar
• Yaldiz, O., and C. Ertekin. 2001. Thin layer solar drying of some different vegetables. Drying Technology 19 (3):583–96. doi:10.1081/DRT-100103936
   Web of Science ®Google Scholar
• Yaldiz, O., C. Ertekin, and H. I. Uzun. 2001. Mathematical modelling of thin layer solar drying of Sultana grapes. Energy 26 (5):457–65. doi:10.1016/S0360-5442(01)00018-4
   Web of Science ®Google Scholar
• ZareaHosseinabadi, H., K. Doosthoseini, and M. Layeghi. 2012. Drying kinetics of poplar (Populus deltoides) wood particles by a convective thin layer dryer. Drvna Industrija 63 (3):169–76. doi:10.5552/drind.2012.1201
   Web of Science ®Google Scholar
• ZareaHosseinabadi, H., M. Layeghi, D. Berthold, K. Doosthosseini, and S. Shahhosseini. 2014. Mathematical modeling the drying of poplar wood particles in a closed-loop triple pass rotary dryer. Drying Technology 32 (1):55–67. doi:10.1080/07373937.2013.811250
   Web of Science ®Google Scholar