Experimental investigation and optimization of machining parameters in drilling of fly ash-filled carbon fiber reinforced composites

References

• Azmir, M. A., P. Nair Sivasankaran, and Z. Hamedon. 2013. Experimental study on drilling process of CFRP composite laminate. Materials Science Forum 638–42:927–32. doi:10.4028/www.scientific.net/msf.638-642.927
   Google Scholar
• Bose, S., and P. A Mahanwar. 2004. Effect of fly ash on the mechanical, thermal, dielectric, rheological and morphological properties of filled nylon 6. Journal of Minerals & Materials Characterization & Engineering 3 (2):65–72. doi:10.4236/jmmce.2004.32007
   Google Scholar
• Brinksmeier, E., and R. Janssen. 2002. Drilling of multi-layer composite materials consisting of carbon fiber reinforced plastics (CFRP), titanium and aluminium alloys. CIRP Annals-Manufacturing Technology 51 (1):87–90. doi:10.1016/S0007-8506(07)61472-3
   Web of Science ®Google Scholar
• Deng, J. 1989. Introduction to grey system. Grey System 1:1–24.
   Google Scholar
• Devim, J. P., and P. Reis. 2003. drilling carbon fiber reinforced plastics manufactured by autoclaveexperimental and statistical study. Materials and Design 24:315–24. doi:10.1016/S0261-3069(03)00062-1
   Web of Science ®Google Scholar
• Durao, L. M. P., D. J. S. Goncalves, and J. M. R. S. Tavares. 2010. Drilling tool geometry evaluation for reinforced composite laminates. Composite Structures 92:1545–50. doi:10.1016/j.compstruct.2009.10.035
   Web of Science ®Google Scholar
• Fujino, J., and T. Honda. 2009. Measurement of the specific heat of plastic waste & fly ash composite material using differential scaning calorimetry. International Journal of Thermophysics 30:976–86. doi:10.1007/s10765-009-0575-5
   Web of Science ®Google Scholar
• Gummadi, J., G. Vijay Kumar, and G. Rajesh. 2012. Evaluation of flexural properties of fly ash filled polypropylene composites. International Journal of Modern Engineering Research 2:2584–90.
   Google Scholar
• Hockeng, H., and C. C. Tsao. 2003. Compresensive analysis of delamination in drilling of composite materials with various drill bits. Journal of Materials Processing Technology 140:335–39. doi:10.1016/S0924-0136(03)00749-0
   Web of Science ®Google Scholar
• Hundiwale, D. G., Kapadi, U. R., Desai, M. C., Bidkar, S. H. 2002. Mechanical properties of natural rubber filled with flyash. Journal of Applied Polymer Science 85:995–1001. doi:10.1002/app.10465
   Web of Science ®Google Scholar
• Jain, S., and Yang, D. C. H. 1994. Delamination-free drilling of composite laminates. Journal of Manufacturing Science and Engineering 116 (4):475–81. doi:10.1115/1.2902131
   Web of Science ®Google Scholar
• Kao, P. S., and H. Hocheng. 2003. Optimization of electrochemical polishing of stainless steel by grey relational analysis. Journal of Materials Processing Technology 140:255–59. doi:10.1016/S0924-0136(03)00747-7
   Web of Science ®Google Scholar
• Myers, R. H., and D. C. Montgomery. 2002. Response surface methodology: Process and product optimization using designed experiments. 2nd ed. New York, USA: John Wiley & Sons.
   Google Scholar
• Navin, C., and S. R. Vashishtha. 2000. Development, structure and strength properties of PP/PMMA/FA blends. Bulletin of Materials Science 23 (2):103–107. Indian Academy of Sciences.
   Web of Science ®Google Scholar
• Palanikumar, K, S. Prakash, and K. Shanmugam. 2008. Evaluation of delamination in drilling GFRP composites. Materials and Manufacturing Process 8:858–64. doi:10.1080/10426910802385026
   Web of Science ®Google Scholar
• Patnaik, A., and A. Satapathy. 2009. Erosion wear response of flyash -glass fiber -polyester composites: A study using Taguchi experimental design. Malaysian Polymer Journal 4:13–28.
   Google Scholar
• Rajasekaran, T., K. Palanikumar, and B. K. Vinayagam. 2011. Application of fuzzy logic for modeling surface roughness in turning CFRP composites using CBN tool. Production Engineering 5:191–99.
   Google Scholar
• Rajmohan, T., K. Mohan, V. Mahalingam, and S. K. Bajpai. 2015. Analysis of surface roughness in drilling of fly ash filled carbon fibre reinforced composites. Applied Mechanics and Materials 813–14:505–10. doi:10.4028/www.scientific.net/AMM.813-814.505
   Google Scholar
• Rajmohan, T., K. Palanikumar, and M. Kathirvel. 2012. Optimization of machining parameters in drilling hybrid aluminium metal matrix composites. Transactions of Nonferrous Metals Society of China 22 (6):1286–97. doi:10.1016/s1003-6326(11)61317-4
   Web of Science ®Google Scholar
• Rajmohan, T., S. Srinivasan, V. Ganesh, and R. Sathiamitthran. 2015. Experimental investigation and analysis of machining parameters in drilling of fly ash filled carbon fibre reinforced composites. Applied Mechanics and Materials 813–814:322–31. doi:10.4028/www.scientific.net/amm.813-814.322
   Google Scholar
• Rajmohan, T., G. Vignesh, K. Palanikumar, and G. Harish. 2013. Synthesis and Characterization of Nano Filled Carbon Fiber Reinforced Composites. Proceedings of the International Conference on Advanced Nanomaterials & Emerging Engineering Technologies” (ICANMEET-2013) IEEE explorer 10.1109/ICANMEET.2013.6609281, 218–20.
   Google Scholar
• Rothon, R. N. 2012. Particulate filled polymer composites. USA: Rapra Technology Limited.
   Google Scholar
• Saroja Devi M., Murugesan, M, Rengaraj, K, and Anand, P. 1998. Utilization of flyash as filler for unsaturated polyester resin. Journal of Applied Polymer Science 69:1385–91. doi:10.1002/(sici)1097-4628(19980815)69:7<1385::aid-app13>3.0.co;2-t
   Web of Science ®Google Scholar
• Singh, I., and N. Bhatnagar. 2006. Drilling of uni-directional glass fiber reinforced plastic (UD-GFRP) composite laminates. The International Journal of Advanced Manufacturing Technology 27:870–76. doi:10.1007/s00170-004-2280-7
   Web of Science ®Google Scholar
• Won, M. S., and C. K. H. Dharan. 2002. Chisel edge and pilot hole effects in drilling composite laminates. Journal of Manufacturing Science and Engineering 124:242–47. doi:10.1115/1.1448317
   Web of Science ®Google Scholar
• Zhou, Y. X., P. X. Wu, Z. Y. Cheng, J. Ingram, and S. Jeelani. 2008. Improvement in electrical, thermal and mechanical properties of epoxy by filling carbon nanotube. Express Polymer Letters 2:40–48. doi:10.3144/expresspolymlett.2008.6
   Web of Science ®Google Scholar
• Zitoune, R., and F. Collombet. 2007. Numerical prediction of the thrust force responsible of delamination during the drilling of the long-fibre composite structures. Journal of Composites Part-A. 38:858–66. doi:10.1016/j.compositesa.2006.07.009
   Web of Science ®Google Scholar