Investigations on mechanical and tribological properties of Al-Si10-Mg alloy/sugarcane bagasse ash particulate composites

References

• Anish, R., M. Sivapragash, and G. Robertsingh. 2014. Compressive behaviour of SiC/ncsc reinforced Mg composite processed through powder metallurgy route. Materials & Design 63:384–88. doi:10.1016/j.matdes.2014.06.040
   Web of Science ®Google Scholar
• Basavarajappa, S., G. Chandramohan, A. Mahadevan, M. Thangavelu, R. Subramanian, and P. Gopalakrishnan. 2007. Influence of sliding speed on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite. Wear 262 (7):1007–12. doi:10.1016/j.wear.2006.10.016
   Web of Science ®Google Scholar
• Bindumadhavan, P. N., H. K. Wah, and O. Prabhakar. 2001. Dual particle size (DPS) composites: Effect on wear and mechanical properties of particulate metal matrix composites. Wear 248 (1):112–20. doi:10.1016/s0043-1648(00)00546-9
   Web of Science ®Google Scholar
• Dhandapani, S., T. Rajmohan, K. Palanikumar, and M. Charan. 2015. Synthesis and characterization of dual particle (MWCT+B4C) reinforced sintered hybrid aluminum matrix composites. Particulate Science and Technology 34:255–62. doi:10.1080/02726351.2015.1069431
   Web of Science ®Google Scholar
• Dwivedi, S. P., S. Sharma, and R. K. Mishra. 2015. Microstructure and mechanical behavior of A356/SiC/Fly-ash hybrid composites produced by electromagnetic stir casting. Journal of the Brazilian Society of Mechanical Sciences and Engineering 37 (1):57–67. doi:10.1007/s40430-014-0138-y
   Web of Science ®Google Scholar
• Faria, K. C. P., R. F. Gurgel, and J. N. F. Holanda. 2012. Recycling of sugarcane bagasse ash waste in the production of clay bricks. Journal of Environmental Management 101:7–12. doi:10.1016/j.jenvman.2012.01.032
   PubMed Web of Science ®Google Scholar
• Gopalakrishnan, S., and N. Murugan. 2012. Production and wear characterisation of AA 6061 matrix titanium carbide particulate reinforced composite by enhanced stir casting method. Composites Part B: Engineering 43 (2):302–08. doi:10.1016/j.compositesb.2011.08.049
   Web of Science ®Google Scholar
• Guo, R. Q., P. K. Rohatgi, and D. Nath. 1996. Compacting characteristics of aluminum-fly ash powder mixtures. Journal of Materials Science 31 (20):5513–19. doi:10.1007/bf01159325
   Web of Science ®Google Scholar
• Hamid, A., P. K. Ghosh, S. C. Jain, and S. Ray. 2008. The influence of porosity and particles content on dry sliding wear of cast in situ Al (Ti)–Al2O3 (TiO2) composite. Wear 265 (1):14–26. doi:10.1016/j.wear.2007.08.018
   Web of Science ®Google Scholar
• Hashim, J., L. Looney, and M. S. J. Hashmi. 1999. Metal matrix composites: Production by the stir casting method. Journal of Materials Processing Technology 92:1–7. doi:10.1016/s0924-0136(99)00118-1
   Web of Science ®Google Scholar
• Itskos, G., P. K. Rohatgi, A. Moutsatsou, J. D. DeFouw, N. Koukouzas, C. Vasilatos, and B. F. Schultz. 2012. Synthesis of A356 Al–high-Ca fly ash composites by pressure infiltration technique and their characterization. Journal of Materials Science 47 (9):4042–52. doi:10.1007/s10853-012-6258-9
   Web of Science ®Google Scholar
• Josyula, S. K., and S. K. R. Narala. 2015. Experimental investigation on tribological behaviour of Al-TiCp composite under sliding wear conditions. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 230:919–29. doi:10.1177/1350650115620110
   Web of Science ®Google Scholar
• Kalaiselvan, K., N. Murugan, and S. Parameswaran. 2011. Production and characterization of AA6061–B 4C stir cast composite. Materials & Design 32 (7):4004–09. doi:10.1016/j.matdes.2011.03.018
   Web of Science ®Google Scholar
• Kumar, B. A, and N. Murugan. 2012. Metallurgical and mechanical characterization of stir cast AA6061-T6–AlN p composite. Materials & Design 40:52–58. doi:10.1016/j.matdes.2012.03.038
   Web of Science ®Google Scholar
• Kumar, G. B. V., C. S. P. Rao, and N. Selvaraj. 2012. Studies on mechanical and dry sliding wear of Al6061–SiC composites. Composites Part B: Engineering 43 (3):1185–91. doi:10.1016/j.compositesb.2011.08.046
   Web of Science ®Google Scholar
• Kumar, K. R., K. M. Mohanasundaram, R. Subramanian, and B. Anandavel. 2014. Influence of fly ash particles on tensile and impact behaviour of aluminum (Al/3Cu/8.5 Si) metal matrix composites. Science and Engineering of Composite Materials 21 (2):181–89. doi:10.1515/secm-2013-0006
   Web of Science ®Google Scholar
• Kumar, P. R. S., S. Kumaran, T. Srinivasa Rao, and S. Natarajan. 2010. High temperature sliding wear behavior of press-extruded AA6061/fly ash composite. Materials Science and Engineering: A 527 (6):1501–09. doi:10.1016/j.msea.2009.10.016
   Web of Science ®Google Scholar
• Kumaran, S. T., and M. Uthayakumar. 2014. Investigation on the dry sliding friction and wear behavior of AA6351-SiC-B4C hybrid metal matrix composites. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 228 (3):332–38. doi:10.1177/1350650113508103
   Web of Science ®Google Scholar
• McDanels, D. L. 1985. Analysis of stress-strain, fracture and ductility behaviour of aluminum matrix composites containing discontinuous silicon carbide reinforcement. Metallurgical Transactions A 16:1105–15. doi:10.1007/bf02811679
   Web of Science ®Google Scholar
• Moreira, P. M. G. P., T. Santos, S. M. O. Tavares, V. Richter-Trummer, P. Vilaça, and P. M. S. T. De Castro. 2009. Mechanical and metallurgical characterization of friction stir welding joints of AA6061-T6 with AA6082-T6. Materials & Design 30 (1):180–87. doi:10.1016/j.matdes.2008.04.042
   Web of Science ®Google Scholar
• Murthy, I. N., D. Venkata Rao, and J. Babu Rao. 2012. Microstructure and mechanical properties of aluminum–fly ash nano composites made by ultrasonic method. Materials & Design 35:55–65. doi:10.1016/j.matdes.2011.10.019
   Web of Science ®Google Scholar
• Murty, S. V. S. N., B. Nageswara Rao, and B. P. Kashyap. 2003. On the hot working characteristics of 6061Al–SiC and 6061–Al2O3 particulate reinforced metal matrix composites. Composites science and technology 63 (1):119–35. doi:10.1016/s0266-3538(02)00197-5
   Web of Science ®Google Scholar
• Rajan, T. P. D., R. M. Pillai, B. C. Pai, K. G. Satyanarayana, and P. K. Rohatgi. 2007. Fabrication and characterisation of Al–7Si–0.35Mg/fly ash metal matrix composites processed by different stir casting routes. Composites Science and Technology 67 (15):3369–77. doi:10.1016/j.compscitech.2007.03.028
   Web of Science ®Google Scholar
• Ramachandra, M., and K. Radhakrishna. 2005. Microstructure, mechanical properties, wear and corrosion behaviour of Al–Si/FLYASHP composite. Materials science and technology 21 (11):1337–43. doi:10.1179/174328405x69533
   Web of Science ®Google Scholar
• Ramachandra, M., and K. Radhakrishna. 2007. Effect of reinforcement of flyash on sliding wear, slurry erosive wear and corrosive behavior of aluminum matrix composite. Wear 262 (11):1450–62. doi:10.1016/j.wear.2007.01.026
   Web of Science ®Google Scholar
• Ramnath, B. V., C. Elanchezhian, M. Jaivignesh, S. Rajesh, C. Parswajinan, and A. Siddique Ahmed Ghias. 2014. Evaluation of mechanical properties of aluminum alloy–alumina–boron carbide metal matrix composites. Materials & Design 58:332–38. doi:10.1016/j.matdes.2014.01.068
   Web of Science ®Google Scholar
• Rao, R. N., and S. Das. 2010. Effect of matrix alloy and influence of SiC particle on the sliding wear characteristics of aluminum alloy composites. Materials & Design 31 (3):1200–07. doi:10.1016/j.matdes.2009.09.032
   Web of Science ®Google Scholar
• Rao, R. N., and S. Das. 2010. Wear coefficient and reliability of sliding wear test procedure for high strength aluminum alloy and composite. Materials & Design 31 (7):3227–33. doi:10.1016/j.matdes.2010.02.017
   Web of Science ®Google Scholar
• Ravikumar, K., K. M. Mohanasundaram, G. Arumaikkannu, and R. Subramanian. 2012. Effect of particle size on mechanical properties and tribological behaviour of aluminum/fly ash composites. Science and Engineering of Composite Materials 19 (3):247–53. doi:10.1515/secm-2011-0139
   Web of Science ®Google Scholar
• Ravindran, P., K. Manisekar, S. Vinoth Kumar, and P. Rathika. 2013. Investigation of microstructure and mechanical properties of aluminum hybrid nano-composites with the additions of solid lubricant. Materials & Design 51:448–56. doi:10.1016/j.matdes.2013.04.015
   Web of Science ®Google Scholar
• Rohatgi, P. K., B. F. Schultz, A. Daoud, and W. W. Zhang. 2010. Tribological performance of A206 aluminum alloy containing silica sand particles. Tribology International 43 (1):455–66. doi:10.1016/j.triboint.2009.07.010
   Web of Science ®Google Scholar
• Saravanan, S. D., and M. Senthilkumar. 2015. Prediction of tribological behaviour of rice husk ash reinforced aluminum alloy matrix composites using artificial neural network. Russian Journal of Non-Ferrous Metals 56 (1):97–106. doi:10.3103/s1067821215010174
   Web of Science ®Google Scholar
• Saravanan, S. D., M. Senthilkumar, and S. Shankar. 2013. Effect of particle size on tribological behavior of rice husk ash–reinforced aluminum alloy (AlSi10Mg) matrix composites. Tribology Transactions 56 (6):1156–67. doi:10.1080/10402004.2013.831962
   Web of Science ®Google Scholar
• Sarkar, S., S. Sen, S. C. Mishra, M. K. Kudelwar, and S. Mohan. 2010. Studies on aluminum—fly-ash composite produced by impeller mixing. Journal of reinforced plastics and composites 29 (1):144–48. doi:10.1177/0731684408096428
   Web of Science ®Google Scholar
• Selvam, J. D. R., D. S. Robinson Smart, and I. Dinaharan. 2013. Microstructure and some mechanical properties of fly ash particulate reinforced AA6061 aluminum alloy composites prepared by compocasting. Materials & Design 49:28–34. doi:10.1016/j.matdes.2013.01.053
   Web of Science ®Google Scholar
• Sharma, P., S. Sharma, and D. Khanduja. 2016. Effect of graphite reinforcement on physical and mechanical properties of aluminum metal matrix composites. Particulate Science and Technology 34 (1):17–22. doi:10.1080/02726351.2015.1031924
   Web of Science ®Google Scholar
• Singh, S., G. Singh, L. Kumar, and S. Singh. 2015. Microstructural analysis and tribological behavior of aluminum alloy reinforced with hybrid alumina/nanographite particles. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 229 (5):597–608. doi:10.1177/1350650114556399
   Web of Science ®Google Scholar
• Surappa, M. K. 2008. Synthesis of fly ash particle reinforced A356 Al composites and their characterization. Materials Science and Engineering: A 480 (1):117–24. doi:10.1016/j.msea.2007.06.068
   Web of Science ®Google Scholar
• Venkat Prasat, S., R. Subramanian, N. Radhika, and B. Anandavel. 2011. Dry sliding wear and friction studies on AlSi10Mg–fly ash–graphite hybrid metal matrix composites using Taguchi method. Tribology-Materials, Surfaces & Interfaces 5 (2):72–81. doi:10.1179/1751584x11y.0000000009
   Google Scholar
• Wang, N., Z. Wang, and G. C Weatherly. 1992. Formation of magnesium aluminate (spinel) in cast SiC particulate-reinforced Al (A356) metal matrix composites. Metallurgical Transactions A 23 (5):1423–30. doi:10.1007/bf02647325
   Web of Science ®Google Scholar
• Yigezu, B. S., P. K. Jha, and M. M. Mahapatra. 2013. Effect of sliding distance, applied load, and weight percentage of reinforcement on the abrasive wear properties of in situ synthesized Al–12% Si/TiC composites. Tribology Transactions 56 (4):546–54. doi:10.1080/10402004.2013.767401
   Web of Science ®Google Scholar
• Yu, S. Y., H. Ishii, K. Tohgo, Y. T. Cho, and D. Diao. 1997. Temperature dependence of sliding wear behavior in SiC whisker or SiC particulate reinforced 6061 aluminum alloy composite. Wear 213 (1):21–28. doi:10.1016/s0043-1648(97)00207-x
   Web of Science ®Google Scholar