Tribological characterization of Al6061/alumina/graphite/redmud hybrid composite for brake rotor application

References

• Arun Premnath, A. 2015. Studies on machining parameters while milling particle reinforced hybrid (Al6061/Al2O3/Gr) MMC. Particulate Science and Technology: An International Journal 33 (6):682–92. doi:10.1080/02726351.2015.1025457.
   Web of Science ®Google Scholar
• Arun Premnath, A., T. Alwarsamy, and T. Rajmohan. 2012. Experimental investigation and optimization of process parameters in milling of hybrid metal matrix composites. Materials and Manufacturing Processes 27:1035–44. doi:10.1080/10426914.2012.677911.
   Web of Science ®Google Scholar
• Ashok Raj, J., A. Pottirayil, and S. V. Kailas. 2016. Dry sliding wear behaviour of Ti-6Al-4V Pin against SS316L disc at constant contact pressure. Journal of Tribology 139 (2):021603–11. doi:10.1115/1.4033363.
   Web of Science ®Google Scholar
• Bodunrin, M. O., K. K. Alaneme, and L. H. Chown. 2015. Aluminium matrix hybrid composites: A review of reinforcement philosophies; mechanical, corrosion and tribological characteristics. Journal of Materials Research and Technology 4:434–45. doi:10.1016/j.jmrt.2015.05.003.
   Google Scholar
• Davim, J. P. 2003. Design optimization of cutting parameters for turning metal matrix composites based on the orthogonal arrays. Journal of Materials Processing Technology 132 (1–3):340–44. doi:10.1016/S0924-0136(02)00946-9.
   Web of Science ®Google Scholar
• Deuis, R. L., C. Subramanian, and J. M. Yellup, 1997. Dry sliding wear of aluminium composites—A review. Journal of Composite Science and Technology. 5:415–35. doi:10.1016/S0266-3538(96)00167-4.
   Web of Science ®Google Scholar
• Dharmalingam, S., R. Subramanian, K. Somasundara Vinoth, and B. Anandavel, 2011. Optimization of tribological properties in aluminum hybrid metal matrix composites using Grey-Taguchi method. Journal of Materials Engineering and Performance 20 (8):1457–66. doi:10.1007/s11665-010-9800-4.
   Web of Science ®Google Scholar
• Grzegorzek, W., and S. F. Scieszka, 2014. Prediction on friction characteristics of industrial brakes using artificial neural networks. Journal of Engineering Tribology 228:1025–35. doi:10.1177/1350650113504907.
   Web of Science ®Google Scholar
• Jha, A. K., S. V. Prasad, and G. S. Upadhyaya. 1989. Dry sliding wear of sintered 6061 aluminium alloy-graphite particle composites. Tribology International 22 (5):321–27. doi:10.1016/0301-679X(89)90147-3.
   Web of Science ®Google Scholar
• Kala, H., K. K. S. Mer, and S. Kumar. 2014. A review on mechanical and tribological behaviors of stir cast aluminum matrix composites. Procedia Materials Science 6:1951–60. doi:10.1016/j.mspro.2014.07.229.
   Google Scholar
• Kok, M. 2006. Abrasive wear of Al2O3 particle reinforced 2024 aluminium alloy composites fabricated by vortex method. Composites: Part A 37 (3):457–464. doi:10.1016/j.compositesa.2005.05.038.
   Google Scholar
• Kumar, M., A. Megalingam, and V. Baskaran. 2015. Dry sliding tribological characterization and parameters optimization of aluminium hybrid metal matrix composite for automobile brake rotor applications. International Journal of Applied Engineering Research 10 (24):21102–09. doi:10.13140/RG.2.1.2801.4246.
   Google Scholar
• Kumar, M., A. Megalingam Murugan, V. Baskaran, and K. S. Hanumanth Ramji. 2016. Effect of sliding distance on dry sliding tribological behaviour of aluminium hybrid metal matrix composite (AlHMMC): An alternate for automobile brake rotor—A grey relational approach. Journal of Engineering Tribology 230 (4):402–15. doi:10.1177/1350650115602724.
   Web of Science ®Google Scholar
• Mahdavi, S., and F. Akhlaghi. 2011. Effect of the SiC particle size on the dry sliding wear behavior of SiC and SiC-Gr-reinforced Al6061 composites. Journal of Materials Science 46:7883–94. doi:10.1007/s10853-011-5776-1.
   Web of Science ®Google Scholar
• Maleque, M. A., S. Dyuti, and M. M. Rahman. 2010. Material selection method in design of automotive brake disc. Proceedings of the world congress on engineering 2010, Vol. III, London, UK.
   Google Scholar
• Mandal, D., B. K. Dutta, and S. C. Panigrahi. 2004. Wear and friction behaviour of stir cast aluminium-base short steel fiber reinforced composites. Wear 257 (7–8):654–64. doi:10.1016/j.wear.2004.02.006.
   Web of Science ®Google Scholar
• Mishra, A. K., R. Sheok, and R. K. Srivastava. 2012. Tribological behaviour of Al-6061/SiC metal matrix composite by Taguchi’s technique. International Journal of Scientific and Research Publications 2:11–15.
   Google Scholar
• Montgomery, D. C. 1996. Design and analysis of experiments. New York: John Wiley and Sons.
   Google Scholar
• Naher, S., D. Brabazon, and L. Looney. 2003. Simulation of the stir casting process. Journal of Materials Processing Technology 143–144:567–71. doi:10.1016/S0924-0136(03)00368-6.
   Web of Science ®Google Scholar
• Naikar, R. C., G. B. Rudrakshi, and S. M. Jigajinni. 2016. A study on dry sliding wear behaviour of Al-6061 redmud composite. International Journal of Innovative Research in Science, Engineering and Technology 5 (5):7827–32. doi:10.15680/IJIRSET.2016.0505202.7827.
   Google Scholar
• Nakanishi, H., K. Kakihara, A. Nakayama, and T. Murayama. 2002. Development of aluminum metal matrix composites (Al-MMC) brake rotor and pad. JSAE Review 23:365–70. doi:10.1016/S0389-4304(02)00203-5.
   Google Scholar
• Natarajan, N., S. Vijayarangan, and I. Rajendran. 2006. Wear behaviour of A356/25SiCp aluminium matrix composites sliding against automobile friction material. Wear 261:812–22. doi:10.1016/j.wear.2006.01.011.
   Web of Science ®Google Scholar
• Panneerselvam, R. 2012. Design and analysis of experiments, 447. Delhi, India: PHI Learning Private Limited.
   Google Scholar
• Prasad, N., H. Sutar, S. C. Mishra, S. K. Sahoo, and S. K. Acharya. 2013. Dry sliding wear behavior of aluminium matrix composite using red mud an industrial waste. International Research Journal of Pure & Applied Chemistry 3 (1):59–74. doi:10.9734/IRJPAC/2013/2906.
   Google Scholar
• Prasad, S. V., and R. Asthana. 2004. Aluminum metal–matrix composites for automotive applications: Tribological considerations. Tribology Letters 17 (3):445–53. doi:10.1023/B:TRIL.0000044492.91991.f3.
   Web of Science ®Google Scholar
• Radhika, N., A. Vaishnavi, and G. K. Chandran. 2014. Optimisation of dry sliding wear process parameters for aluminium hybrid metal matrix composites. Tribology in Industry 36 (2):188–94.
   Google Scholar
• Radhika, N., and R. Raghu. 2015. Experimental investigation on abrasive wear behavior of functionally graded aluminum composite. Journal of Tribology 137:031606–1–7. doi:10.1115/1.4029941.
   Web of Science ®Google Scholar
• Radhika, N., and R. Raghu. 2016. The mechanical properties and abrasive wear behavior of functionally graded aluminum/AlB2 composites produced by centrifugal casting. Particulate Science and Technology: An International Journal 33 (6):1–8. doi:10.1080/02726351.2016.1184728.
   Web of Science ®Google Scholar
• Rajesh, S., A. Gopala Krishna, P. Rama Murty Raju, and M. Duraiselvam. 2014. Statistical analysis of dry sliding wear behavior of graphite reinforced aluminum MMCs. Procedia Materials Science 6:1110–1120. doi:10.1016/j.mspro.2014.07.183.
   Google Scholar
• Riahi, A. R., and A. T. Alpas. 2001. The role of tribo-layers on the sliding wear behavior of graphitic aluminum matrix composites. Wear 251 (1–12):396–1407. doi:10.1016/S0043-1648(01)00796-7.
   Google Scholar
• Ross, P. J. 1988. Taguchi technique for quality engineering. New York: McGraw-Hill.
   Google Scholar
• Shin, M. W., K. H. Cho, S. J. Kim, and H. Jang. 2010. Friction instability induced by corrosion of grey iron brake discs. Tribology Letters 37:149–57. doi:10.1007/s11249-009-9503-x.
   Web of Science ®Google Scholar
• Show, B. K., D. K. Mondal, and J. Maity. 2014. Dry sliding wear behavior of aluminum-based metal matrix composites with single (Al2O3) and hybrid (Al2O3 + SiC) reinforcements. Metallography, Microstructure and Analysis 3 (1):11–29. doi:10.1007/s13632-013-0113-5.
   Google Scholar
• Singh, S. 2012. Optimization of machining characteristics in electric discharge machining of 6061Al/Al2O3p/20p composites by grey relational analysis. International Journal of Advanced Manufacturing Technology 63:1191–1202. doi:10.1007/s00170-012-3984-8.
   Web of Science ®Google Scholar
• Singh, S., M. Garg, and N. K. Batra. 2016. Analysis of dry sliding behavior of Al2O3/B4C/Gr aluminium alloy metal matrix hybrid composite using Taguchi methodology. Tribology Transactions 58 (4):758–65. doi:10.1080/10402004.2015.1015757.
   Web of Science ®Google Scholar
• Suresh, P., K. Marimuthu, S. Ranganathan, and T. Rajmohan. 2014. Optimization of machining parameters in turning of Al−SiC−Gr hybrid metal matrix composites using grey-fuzzy algorithm. Transactions of Nonferrous Metals Society of China 24 (9):2805–14. doi:10.1016/S1003-6326(14)63412-9.
   Web of Science ®Google Scholar
• Taguchi, G., and S. Konishi. 1987. Taguchi methods, orthogonal arrays and linear graphs, tools for quality engineering, 35–38. Dearborn, MI: American Supplier Institute.
   Google Scholar
• Umanath, K., K. Palaikumar, and S. T. Selvamani. 2013. Analysis of dry sliding wear behaviour of Al6061/SiC/Al2O3 hybrid metal matrix composites. Composites: Part B 53:159–68. doi:10.1016/j.proeng.2014.12.299.
   Web of Science ®Google Scholar
• Uvaraja, V. C., N. Natarajan, I. Rajendran, and K. Sivakumar. 2013. Tribological behavior of novel hybrid composite materials using Taguchi technique. Journal of Tribology 135:021101–1–12. doi:10.1115/1.4023147.
   Web of Science ®Google Scholar
• Veeresh Kumar, G. B., C. S. P. Rao, and N. Selvaraj. 2011. Mechanical and tribological behavior of particulate reinforced aluminum metal matrix composites—A review. Journal of Minerals and Materials Characterization Engineering 10 (1):59–91. doi:10.4236/jmmce.2011.101005.
   Google Scholar
• Zhang, J. Z., and J. C. Chen. 2009. Surface roughness optimization in a drilling operation using the Taguchi design method. Materials and Manufacturing Processes 24:459–67. doi:10.1080/10426910802714399.
   Web of Science ®Google Scholar
• Zhang, S., and F. Wang. 2007. Comparison of friction and wear performances of brake material dry sliding against two aluminum matrix composites reinforced with different sic particles. Journal of Materials Processing Technology 182:122–27. doi:10.1016/j.jmatprotec.2006.07.018.
   Web of Science ®Google Scholar