Drilling studies on carbon fiber-reinforced nano-SiC particles composites using response surface methodology

References

• Abhishek, K., S. Datta, and S. Mahapatra. 2015. Optimization of thrust, torque, entry, and exist delamination factor during drilling of CFRP composites. International Journal of Advanced Manufacturing Technology 76:401–16. doi:10.1007/s00170-014-6199-3.
   Web of Science ®Google Scholar
• Alexandre, M., and P. Dubois. 2000. Polymer-layered silicate nanocomposites: Preparation, properties and uses of a new class of materials. Materials Science and Engineering: R: Reports 28 (1):1–63. doi:10.1016/s0927-796x(00)00012-7.
   Web of Science ®Google Scholar
• Ameur, M. F., M. Habak, M. Kenane, H. Aouici, and M. Cheikh. 2017. Machinability analysis of dry drilling of carbon/epoxy composites: Cases of exit delamination and cylindricity error. The International Journal of Advanced Manufacturing Technology 88 (9–12):2557–71. doi:10.1007/s00170-016-8967-8.
   Web of Science ®Google Scholar
• Amran, M. A., S. Salmah, N. I. S. Hussein, R. Izamshah, M. Hadzley, M. S. Kasim, and M. A. Sulaiman. 2013. Effects of machine parameters on surface roughness using response surface method in drilling process. Procedia Engineering 68:24–29. doi:10.1016/j.proeng.2013.12.142.
   Google Scholar
• Chen, W. C. 1997. Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates. International Journal of Machine Tools and Manufacture 37 (8):1097–108. doi:10.1016/s0890-6955(96)00095-8.
   Web of Science ®Google Scholar
• Davies, G. A. O. 1999. Aerospace composite structures in the USA. Report for the International Technology Service (Overseas Missions Unit) of the DTI, UK.
   Google Scholar
• Davim, J. P., and P. Reis. 2003. Study of delamination in drilling carbon fiber reinforced plastics (CFRP) using design experiments. Composite Structures 59 (4):481–87. doi:10.1016/s0263-8223(02)00257-x.
   Web of Science ®Google Scholar
• Derringer, G. 1980. Simultaneous optimization of several response variables. Journal of Quality Technology 12 (4):214–19.
   Web of Science ®Google Scholar
• Faria, P. E., J. C. Campos Rubio, A. M. Abrao, and J. P. Davim. 2009. Dimensional and geometric deviations induced by drilling of polymeric composite. Journal of Reinforced Plastics and Composites 28 (19):2353–63. doi:10.1177/0731684408092067.
   Web of Science ®Google Scholar
• Gaitonde, V. N., S. R. Karnik, J. C. Rubio, A. E. Correia, A. M. Abrão, and J. P. Davim. 2011. A study aimed at minimizing delamination during drilling of CFRP composites. Journal of Composite Materials 45 (22):2359–68. doi:10.1177/0021998311401087.
   Web of Science ®Google Scholar
• Geier, N., and T. Szalay. 2017. Optimisation of process parameters for the orbital and conventional drilling of uni-directional carbon fibre-reinforced polymers (UD-CFRP). Measurement 110:319–34. doi:10.1016/j.measurement.2017.07.007.
   Web of Science ®Google Scholar
• Godara, A., L. Mezzo, F. Luizi, A. Warrier, S. V. Lomov, A. W. Van Vuure, L. Gorbatikh, P. Moldenaers, and I. Verpoest. 2009. Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites. Carbon 47 (12):2914–23. doi:10.1016/j.carbon.2009.06.039.
   Web of Science ®Google Scholar
• Herbert, M. A., D. Shetty, G. S. Vijay, and R. Shetty. 2014. Evaluation of drilling induced delamination of carbon fiber reinforced polymer composite using solid carbide drills. European Scientific Journal 10 (15):279–292.
   Google Scholar
• Karnik, S. R., V. N. Gaitonde, J. C. Rubio, A. E. Correia, A. M. Abrão, and J. P. Davim. 2008. Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model. Materials & Design 29 (9):1768–76. doi:10.1016/j.matdes.2008.03.014.
   Web of Science ®Google Scholar
• Khashaba, U. A. 2004. Delamination in drilling GFR-thermoset composites. Composite Structures 63 (3):313–27. doi:10.1016/s0263-8223(03)00180-6.
   Web of Science ®Google Scholar
• Malghan, R. L., K. M. Rao, A. K. Shettigar, S. S. Rao, and R. J. D’Souza. 2017. Application of particle swarm optimization and response surface methodology for machining parameters optimization of aluminium matrix composites in milling operation. Journal of the Brazilian Society of Mechanical Sciences and Engineering 39:3541–53. doi:10.1007/s40430-016-0675-7.
   Web of Science ®Google Scholar
• Montgomery, D. C. 2017. Design and analysis of experiments. New York: John Wiley & Sons.
   Google Scholar
• Palanikumar, K. 2011. Experimental investigation and optimisation in drilling of GFRP composites. Measurement 44 (10):2138–48. doi:10.1016/j.measurement.2011.07.023.
   Web of Science ®Google Scholar
• Prabu, V. A., S. T. Kumaran, and M. Uthayakumar. 2017. Influence of redmud particle hybridization in banana/sisal and sisal/glass composites. Particulate Science and Technology 1–6. doi:10.1080/02726351.2016.1267284.
   Web of Science ®Google Scholar
• Prakash, S., K. Palanikumar, and N. Manoharan. 2009. Optimization of delamination factor in drilling medium-density fiberboards (MDF) using desirability-based approach. The International Journal of Advanced Manufacturing Technology 45 (3):370–81. doi:10.1007/s00170-009-1974-2.
   Web of Science ®Google Scholar
• Rajmohan, T. 2016. Experimental investigation and optimization of machining parameters in drilling of fly ash-filled carbon fiber reinforced composites. Particulate Science and Technology 1–10. doi:10.1080/02726351.2016.1205686.
   Web of Science ®Google Scholar
• Sharma, N., R. Khanna, G. Singh, and V. Kumar. 2016. Fabrication of 6061 aluminum alloy reinforced with Si3N4/n-Gr and its wear performance optimization using integrated RSM-GA. Particulate Science and Technology 1–11. doi:10.1080/02726351.2016.1196276.
   Web of Science ®Google Scholar
• Tamilarasan, U., L. Karunamoorthy, and K. Palanikumar. 2015. Mechanical properties evaluation of the carbon fibre reinforced aluminium sandwich composites. Materials Research 18 (5):1029–37. doi:10.1590/1516-1439.017215.
   Web of Science ®Google Scholar
• Thakur, R., R. K. Gupta, and S. Barman. 2016. Optimization of process parameters for transalkylation of toluene to xylene using response surface methodology. Particulate Science and Technology 34 (3):332–40. doi:10.1080/02726351.2015.1081656.
   Web of Science ®Google Scholar
• Tsao, C. C. 2008. Investigation into the effects of drilling parameters on delamination by various step-core drills. Journal of Materials Processing Technology 206 (1):405–11. doi:10.1016/j.jmatprotec.2007.12.057.
   Web of Science ®Google Scholar
• Tsao, C. C., and H. Hocheng. 2008. Evaluation of thrust force and surface roughness in drilling composite material using Taguchi analysis and neural network. Journal of Materials Processing Technology 203 (1):342–48. doi:10.1016/j.jmatprotec.2006.04.126.
   Web of Science ®Google Scholar
• Tsao, C. C., and C. C. Huang. 2015. Analysis of thrust-induced drilling in composite materials using a hemispherical drill. The International Journal of Advanced Manufacturing Technology 80 (1–4):607–13. doi:10.1007/s00170-015-7044-z.
   Web of Science ®Google Scholar
• Uddin, M. F., and C. T. Sun. 2008. Strength of unidirectional glass/epoxy composite with silica nanoparticle-enhanced matrix. Composites Science and Technology 68 (7):1637–43. doi:10.1016/j.compscitech.2008.02.026.
   Web of Science ®Google Scholar
• Vijay, R., and D. L. Singaravelu. 2016. Experimental investigation on the mechanical properties of Cyperus pangorei fibers and jute fiber-based natural fiber composites. International Journal of Polymer Analysis and Characterization 21 (7):617–27. doi:10.1080/1023666x.2016.1192354.
   Web of Science ®Google Scholar