Modelling solids friction for fluidized dense-phase pneumatic conveying

References

• Barth, W. 1958. Flow processes during the transport of solid particles and liquid particles in gases. with special consideration of the processes of pneumatic conveying. Chemie Ingenieur Technik 30 (3):171–80.
   Google Scholar
• Behera, N., V. K. Agarwal, M. Jones, and K. C. Williams. 2013. Modeling and analysis of solids friction factor for fluidized dense phase pneumatic conveying of powders. Particulate Science and Technology 31 (2):136–46.
   Web of Science ®Google Scholar
• Behera, N., V. K. Agarwal, and M. Jones. 2015. A model of solids friction factor for fluidized dense phase pneumatic conveying. Powder Technology 284:403–10.
   Web of Science ®Google Scholar
• Cai, L., S. Liu, X. Pan, X. Guiling, Y. Gaoyang, C. Xiaoping, and Z. Changsui. 2014. Comparison of pressure drops through different bends in dense-phase pneumatic conveying system at high pressure. Experimental Thermal and Fluid Science 57:11–19.
   Web of Science ®Google Scholar
• Chambers, A. J., and R. D. Marcus. 1986. Pneumatic conveying calculations. In The proceedings of 2nd international conference on bulk materials storage and transportation, 49–52. Wollongong, Australia: Australian Society of Bulk Solids and Handling.
   Google Scholar
• Chunhui, H., C. Xianmei, W. Jianhao, N. Hongliang, X. Yupeng, Z. Haijun, X. Yuanquan, and S. Xianglin. 2012. Conveying characteristics and resistance characteristics in dense phase pneumatic conveying of rice husk and blending of rice husk and coal at high pressure. Powder Technology 227:51–60.
   Web of Science ®Google Scholar
• Fehlberg, E. 1969. Low-order classical Runge–Kutta formulas with step size control and their application to some heat transfer problems. NASA Technical Report 314–20.
   Google Scholar
• Lu, H., X. Guo, Y. Liu, P. Li, and X. Gong. 2016. Solid-mass flow-rate prediction in dense-phase pneumatic conveying of pulverized coal by a venturi device. Industrial and Engineering Chemistry Research 55:10455–64.
   Web of Science ®Google Scholar
• Hong, J., and Y. S. Shen. 1994. Flow characteristics of high density continuous conveying of solids. Chemical and Metallurgical Engineering 15:122–8. (in Chinese).
   Google Scholar
• Jones, M. G., and K. C. Williams. 2003. Solids friction factors for fluidized dense phase conveying. Particulate Science and Technology 21 (1):45–56.
   Web of Science ®Google Scholar
• Kaur, B., A. Mittal, P. Wypych, S. S. Mallick, and S. Jana. 2017. On developing improved modelling and scale-up procedures for pneumatic conveying of fine powders. Powder Technology 305:270–8.
   Web of Science ®Google Scholar
• Klinzing, G. E., R. D. Marcus, F. Rizk, and L. S. Leung. 1997. Pneumatic conveying of solids – a theoretical and practical approach. 2nd ed. Chapman & Hall. doi:10.1007/978-94-015-8981-9.
   Google Scholar
• Klinzing, G. E., C. A. Myler, A. Zaltash, and S. Dhodapkar. 1989. A simplified correlation for solids friction factor in horizontal conveying systems based on yang's unified theory. Powder Technology 58 (3):187–93.
   Web of Science ®Google Scholar
• Li, K., S. B. Kuang, R. H. Pan, and A. B. Yu. 2014. Numerical study of horizontal pneumatic conveying: Effect of material properties. Powder Technology 251:15–24.
   Web of Science ®Google Scholar
• Mallick, S. S. 2009. Modeling dense-phase pneumatic conveying of powders. PhD diss., University of Wollongong, Australia.
   Google Scholar
• Mi, B., and P. W. Wypych. 1994. Pressure drop prediction in low-velocity pneumatic conveying. Powder Technology 81 (2):125–37.
   Web of Science ®Google Scholar
• Mi, B., and P. W. Wypych. 1995. Investigations into wall pressure during slug-flow pneumatic conveying. Powder Technology 84 (1):91–8.
   Web of Science ®Google Scholar
• Mills, D. 2004. Pneumatic conveying design guide. 2nd ed. Oxford Publ., Elsevier/Butterworth-Heinemann.
   Google Scholar
• Pan, R. 1999. Material properties and flow modes in pneumatic conveying. Powder Technology 104 (2):157–63.
   Web of Science ®Google Scholar
• Pan, R., and P.W. Wypych. 1992. Scale up procedures for pneumatic conveying design. Powder Handling and Processing 4 (2):167–72.
   Google Scholar
• Pan, R., and P. W. Wypych. 1997. Pressure drop and slug velocity in low-velocity pneumatic conveying of bulk solids. Powder Technology 94 (2):123–32.
   Web of Science ®Google Scholar
• Pan, R., and P. W. Wypych. 1998. Dilute and dense phase pneumatic conveying of fly ash. In The proceedings of 6th international conference on bulk materials storage and transportation, 183–9. Wollongong, NSW, Australia: Australian Society of Bulk Solids and Handling.
   Google Scholar
• Ratnayake, C., B. K. Datta, and M. C. Melaaen. 2007. A unified scaling-up technique for pneumatic conveying systems. Particulate Science and Technology 25 (3):289–302.
   Web of Science ®Google Scholar
• Setia, G., and S. S. Mallick. 2015. Modelling fluidized dense-phase pneumatic conveying of fly ash. Powder Technology 270:39–45.
   Web of Science ®Google Scholar
• Setia, G., S. S. Mallick, P. W. Wypych, and R. Pan. 2016. Modeling solids friction factor for fluidized dense-phase pneumatic transport of powders using two-layer flow theory. Powder Technology 294:80–92.
   Web of Science ®Google Scholar
• Setia, G., S. S. Mallick, and P. W. Wypych. 2014. On improving solid friction factor modelling for fluidized Dense-Phase pneumatic conveying systems. Powder Technology 257:88–103.
   Web of Science ®Google Scholar
• Weber, M. 1981. Principles of hydraulic and pneumatic conveying in pipes. Bulk Solids Handling 1:57–63.
   Google Scholar
• Wei, W., G. Qingliang, W. Yuxin, Y. Hairui, Z. Jiansheng, and L. Junfu. 2011. Experimental study on the solid velocity in horizontal dilute phase pneumatic conveying of fine powders. Powder Technology 212 (3):403–9.
   Web of Science ®Google Scholar
• Williams, K. C., and M. G. Jones. 2004. Numerical model velocity profile of fluidized dense phase pneumatic conveying, 354–8. In The proceedings of 8th international conference on bulk materials storage and transportation. Wollongong, NSW, Australia: Australian Society of Bulk Solids and Handling. July 5–8.
   Google Scholar
• Wypych, P. W. 1989. Pneumatic conveying of bulk solids. PhD Diss., University of Wollongong, Australia.
   Google Scholar
• Wypych, P. W., O. C. Kennedy, and P. C. Arnold. 1990. The future potential of pneumatically conveying coal through pipelines. Bulk Solids Handling 10:421–7.
   Google Scholar
• Wypych, P. W., O. C. Kennedy, and P. C. Arnold. 1990a. Pneumatic conveying of pulverized and crushed R.O.M. coal. In The proceedings of 4th international conference on pneumatic conveying technology, 26–28. Glasgow, Scotland.
   Google Scholar