References
- Ahmed, H. A. M., and J. Drrzymala. 2005. Two-dimensional fractal linearization of distribution curves. Physicochemical Problems of Mineral Processing. 39:129–39.
- Airikka, P. 2015. Automatic feed rate control with feed-forward for crushing and screening processes. IFAC-PapersOnline 48–17:149–54.
- Allen, T. 1997. Particle size measurement. Powder sampling and particle size measurement. Powder technology series, Vol. 1. London: Chapman and Hall.
- Arhangel’skii, A. V., and J. van Mill. 2018. Some aspects of dimension theory for topological groups. Indagationes Mathematica 29:202–25.
- Bartoli, F., R. Philippy, M. Doirisse, S. Niquet, and M. Dubuit. 1991. Structure and selfsimilarity in silty and sandy soils: The fractal approach. Journal of Soil Science 42 (2):167–85. doi: https://doi.org/10.1111/j.1365-2389.1991.tb00399.x.
- Blenkinsop, T. G. 1991. Cataclasis and processes of particle size reduction. Pure and Applied Geophysics. 136:1–33.
- Cai, G., Y. Xiong, and L. Lin. 2015. Experimental study on the fractal characteristics of rocks crushing. MATEC Web of Conferences, 25, 02008.
- Carpinteri, A., and N. Pugno. 2002. A fractal comminution approach to evaluate the drilling energy dissipation. International Journal for Numerical and Analytical Methods in Geomechanics 26 (5):499–513. [Database] doi: https://doi.org/10.1002/nag.209.
- Carpinteri, A., and N. Pugno. 2003. A multifractal comminution approach for drilling scaling laws. Powder Technology 131 (1):93–8. doi: https://doi.org/10.1016/S0032-5910(02)00335-2.
- Casini, F., G. M. B. Viggiani, and S. M. Springman. 2013. Breakage of an artificial crushablematerial under loading. GranularMatter 15 (5):661–73.
- Cui, L., L. An, and W. Gong. 2006. Effects of process parameters on the comminution capability of high pressure water jet mill. International Journal of Mineral Processing. 81 (2):113–21. doi: https://doi.org/10.1016/j.minpro.2006.07.005.
- Delagrammatikas, G., M. Delagrammatikas, and S. Tsimas. 2007. Particle size distributions a new approach. Powder Technology 176 (2–3):57–65. doi: https://doi.org/10.1016/j.powtec.2007.01.026.
- Dunne, C. R., K. S. Kawatra, and A. C. Young. 2019. SME mineral processing extractive metallurgy handbook. Englewood, CO: Society for Mining, Metallurgy & Exploration.
- Elias, I., S. Chaffer, and E. Moya. 2015. Improvements in service life and cost reduction for gyratory primary crushers through mantle and concaves optimization: A case study. Proceedings of Iron Ore 2015, Australasian Institute of Mining and Metallurgy, Melbourne, Victoria, 115–27.
- Evertsson, C. M. 2000. Cone crusher performance. Ph.D. thesis, Chalmers University of Technology, Sweden.
- Falconer, K. 2003. Fractal geometry mathematical foundations and applications. Hoboken: John Wiley and Sons.
- Filippov, L. O., R. Joussemet, M. Irannajad, R. Houot, and A. Thomas. 1999. An approach of the whiteness quantification of crushed and floated talc concentrate. Powder Technology 105 (1–3):106–12. doi: https://doi.org/10.1016/S0032-5910(99)00124-2.
- Flook, A. G. 1978. The use of dilation logic on the quantimet to achieve fractal dimension characterization of textured surfaces. Powder Technology 21 (2):295–8. doi: https://doi.org/10.1016/0032-5910(78)80099-0.
- Fuerstenau, D. W., J. J. Lutch, and A. De. 1999. The effect of ball size on the energy efficiency of hybrid high-pressure roll mill/ball mill grinding. Powder Technology 105 (1–3):199–204. doi: https://doi.org/10.1016/S0032-5910(99)00138-2.
- Glazner, A. F., and R. D. Mills. 2012. Interpreting two-dimensional cuts through broken geologic objects: Fractal and non-fractal size distributions. Geosphere 8 (4):902–14. doi: https://doi.org/10.1130/GES00731.1.
- Gupta, A., and D. Yan. 2016. Mineral processing design and operations. 2nd ed., Chapter 6 – Roll crushers, 169–88. Amsterdam: Elsevier.
- Hamzelo, E., M. Masinaei, and N. Mehrshad. 2013. Discrimination and Identification of Hydrothermal Alteration Types Related to Porphyry Copper Deposits, Using Hyperion Hyperspectral Data. Iranian Journal of Mining Engineering (IRJME) 8 (19):25–33. (In Persian)
- Hyslip, J., and L. E. Vallejo. 1997. Fractal analysis of the roughness and size distribution of granular materials. Engineering Geology. 48 (3–4):231–44. doi: https://doi.org/10.1016/S0013-7952(97)00046-X.
- Irannajad, M. 1998. Chapter vii: Study of Particles Morphology by Fractal Approach. PhD thesis, entitled: Valorization of talcose mining rejects by physico-chemical (flotation) processing: Influence of treatments on the whiteness of concentrates. Department of Environment and Mineralurgy (Laboratoire Environnment et Mineralurgie (L.E.M.), National Superior School of Applied Geology (Ecole Nationale Superieure de Geologie Applique (ENSG), University of Lorraine (ex. Lorraine National Polytechnics Institute (Institut National Polytechnique de Lorraine (INPL), Nancy, France.
- Lu, P., I. F. Jefferson, M. S. Rosenbaum, and I. J. Smalley. 2003. Fractal characteristics of loess formation: Evidence from laboratory experiments. Engineering Geology 69 (3–4):287–93. doi: https://doi.org/10.1016/S0013-7952(02)00287-9.
- Mandelbrot, B. B. 1982. The fractal geometry of nature. New York: Freeman.
- Mohammadi, M., M. Shabanpour, M. H. Mohammadi, and N. Davatgar. 2019. Characterizing spatial variability of soil textural fractions and fractal parameters derived from particle size distributions. Pedosphere 29 (2):224–34. doi: https://doi.org/10.1016/S1002-0160(17)60425-9.
- Moradi, I., M. H. Mohammadzadeh, and M. Irannajad. 2019. Calculation of fractal dimension of crushing product by variation of ore type and feed size distribution. The 2nd Iranian Conference of Green Mining & Mineral Industry. Zanjan, Iran. 18 December.
- Petrakis, E., E. Stamboliadis, and K. Komnitsas. 2017. Evaluation of the relationship between energy input and particle size distribution in comminution with the use of piecewise regression analysis. Particulate Science and Technology 35 (4):479–89. doi: https://doi.org/10.1080/02726351.2016.1168894.
- Radziszewski, P. 2000. Developing an experimental procedure for charge media wear prediction. Minerals Engineering 13 (8–9):949–61. doi: https://doi.org/10.1016/S0892-6875(00)00080-7.
- Sadrai, S., J. A. Meech, M. Ghomshei, F. Sassani, and D. Tromans. 2006. Influence of impact velocity on fragmentation and the energy efficiency of comminution. International Journal of Impact Engineering. 33 (1–12):723–34. doi: https://doi.org/10.1016/j.ijimpeng.2006.09.063.
- Sadrai, S.,. J. A. Meech, D. Tromans, and F. Sassani. 2011. Energy efficient comminution under high velocity impact fragmentation. Minerals Engineering 24 (10):1053–61. doi: https://doi.org/10.1016/j.mineng.2011.05.006.
- Stamboliadis, E., E. Petrakis, and O. Pantelaki. 2011. Variation of dimensional properties of particulate materials during grinding and their non-fractal nature. Canadian Metallurgical Quarterly 50 (2):119–26. doi: https://doi.org/10.1179/000844311X12949291727970.
- Tasdemir, A. 2009. Fractal evaluation of particle size distributions of chromites in different comminution environments. Minerals Engineering 22:156–67.
- Turcotte, D. L. 1986. Fractals and fragmentation. Journal of Geophysical Research 91 (B2):1921–6. doi: https://doi.org/10.1029/JB091iB02p01921.
- Turcotte, D. L. 1992. Fractals and chaos in geology and geophysics. Cambridge: Cambridge University Press.
- Tyler, S. W., and S. W. Wheatcraft. 1992. Fractal scaling of soil particle-size distribution: Analyses and limitations. Soil Science Society of America Journal 56 (2):362–9. doi: https://doi.org/10.2136/sssaj1992.03615995005600020005x.
- Wang, Y., W. Dan, Y. Xu, and Y. Xi. 2015. Fractal and morphological characteristics of single marble particle crushing in uniaxial compression tests. Advances in Materials Science and Engineering 2015:1–10.
- Wills, B. A., J. A. Finch, F. C. I. M. Frsc, and P. Eng. 2016. Chapter 6 – Crushers. In Wills' mineral processing technology: An introduction to the practical aspects of ore treatment and mineral recovery, 8th ed., ed. B. A. Wills and J. A. Finch, 123–46. Amsterdam; Boston, MA: Elsevier/BH.
- Xu, Y. 2018. Fractal dimension of demolition waste fragmentation and its implication of compactness. Powder Technology 339:922–9. doi: https://doi.org/10.1016/j.powtec.2018.08.071.
- Zhang, J. R., Z. L. Hu, and Z. D. Liu. 2004. Fractal features characterized by particle size distribution of eco-material for erosion control of cutting slope. http://docplayer.net.
- Zhang, J., M. Li, Z. Liu, and N. Zhou. 2017. Fractal characteristics of crushed particles of coal gangue under compaction. Powder Technology 305:12–8. doi: https://doi.org/10.1016/j.powtec.2016.09.049.
- Zhong, W., N. He, T. Cosgrove, Y. J. Zhu, and L. Fu. 2019. Analysis of the correlation between fractal dimension of gravelly soil and debris-flow initiation through in-situ experiments. http://www.aloki.hu.