References
- Abdizadeh, H., and M. A. Baghchesara. 2013. Investigation into the Mechanical Properties and Fracture Behavior of A356 Aluminum Alloy-Based ZrO2-Particle-Reinforced Metal-Matrix Composites. Mechanics of Composite Materials 49 (5):571–6. doi: https://doi.org/10.1007/s11029-013-9373-z.
- Ajay Kumar, P., P. Rohatgi, and D. Weiss. 2020. 50 Years of Foundry-Produced Metal Matrix Composites and Future Opportunities. International Journal of Metalcasting 14 (2):291–317. doi: https://doi.org/10.1007/s40962-019-00375-4.
- Alipour, M., M. Emamy, S. H. Seyed Ebrahimi, M. Azarbarmas, M. Karamouz, and J. Rassizadehghani. 2011. Effects of Pre-Deformation and Heat Treatment Conditions in the SIMA Process on Properties of an Al-Zn-Mg-Cu Alloy Modified by Al-8B Grain Refiner. Materials Science and Engineering A 528 (13–14):4482–90. doi: https://doi.org/10.1016/j.msea.2011.02.026.
- Alipour, M., and R. Eslami-Farsani. 2017. Synthesis and Characterization of Graphene Nanoplatelets Reinforced AA7068 Matrix Nanocomposites Produced by Liquid Metallurgy Route. Materials Science and Engineering A 706:71-82. doi: https://doi.org/10.1016/j.msea.2017.08.092.
- Arif, S., M. T. Alam, A. H. Ansari, M. Arif Siddiqui, and M. Mohsin. 2017. Study of Mechanical and Tribological Behaviour of Al/SiC/ZrO2 Hybrid Composites Fabricated through Powder Metallurgy Technique. Materials Research Express 4 (7):076511. doi: https://doi.org/10.1088/2053-1591/aa7b5f.
- Badkul, A., N. Jha, D. P. Mondal, S. Das, and M. S. Yadav. 2011. Age Hardening Behaviour of 2014 Al Alloy-SiC Composites: Effect of Porosity and Strontium Addition. Indian Journal of Engineering and Materials Sciences 18 (1):79–85.
- Baradeswaran, A., and A. E. Perumal. 2015. Effect of Graphite on Tribological and Mechanical Properties of AA7075 Composites. Tribology Transactions 58 (1):1–6. doi: https://doi.org/10.1080/10402004.2014.947663.
- Bonollo, F., L. Ceschini, and G. L. Garagnani. 1997. Mechanical and Impact Behaviour of (Al2O3)p/2014 and (Al2O3)p/6061 Al Metal Matrix Composites in the 25–200 °C Range. Applied Composite Materials 4 (3):173–85. doi: https://doi.org/10.1023/A:1008816403726.
- Chelladurai, S. J. S., and R. Arthanari. 2020. Prediction of Hardness of Stir Cast LM13 Aluminum Alloy – Copper Coated Short Steel Fiber Reinforced Composites Using Response Surface Methodology. Materialwissenschaft Und Werkstofftechnik 51 (2):221–9. doi: https://doi.org/10.1002/mawe.201900068.
- Chelladurai, S. J. S., T. Murugesan, T. Rajamani, S. Anand, S. J. P. Asok, and S. Kumaravel. 2019. Investigation on Mechanical Properties and Tribological Behaviour of Stir Cast LM13 Aluminium Alloy Based Particulate Hybrid Composites. Materialwissenschaft Und Werkstofftechnik 50 (7):864–74. doi: https://doi.org/10.1002/mawe.201800116.
- Chelladurai, S. J. S., and R. Arthanari. 2018. Effect of Stir Cast Process Parameters on Wear Behaviour of Copper Coated Short Steel Fibers Reinforced LM13 Aluminium Alloy Composites. Materials Research Express 5 (6):066550. doi: https://doi.org/10.1088/2053-1591/aacd38.
- Chelladurai, S. J. S., and R. Arthanari. 2019. Investigation on Mechanical and Wear Properties of Zinc-Coated Steel Wires Reinforced LM6 Aluminium Alloy Composites by Squeeze Casting. Surface Review and Letters 26 (01):1850125–10. doi: https://doi.org/10.1142/S0218625X18501251.
- Chelladurai, S. J. S., R. Arthanari, A. N. Thangaraj, and H. Sekar. 2017. Dry Sliding Wear Characterization of Squeeze Cast LM13/FeCu Composite Using Response Surface Methodology. China Foundry 14 (6):525–33. doi: https://doi.org/10.1007/s41230-017-7101-3.
- Chelladurai, S. J. S., R. Arthanari, K. Krishnamoorthy, K. S. Selvaraj, and P. Govindan. 2018a. Effect of Copper Coating and Reinforcement Orientation on Mechanical Properties of LM6 Aluminium Alloy Composites Reinforced with Steel Mesh by Squeeze Casting. Transactions of the Indian Institute of Metals 71 (5):1041–8. doi: https://doi.org/10.1007/s12666-017-1235-2.
- Chelladurai, S. J. S., R. Arthanari, K. Krishnamoorthy, K. S. Selvaraj, and P. Govindan. 2018b. Investigation of the Mechanical Properties of a Squeeze-Cast LM6 Aluminium Alloy Reinforced with a Zinc-Coated Steel-Wire Mesh. Materiali in Tehnologije 52 (2):125–31. doi: https://doi.org/10.17222/mit.2017.019.
- Chelladurai, S. J. S., R. Arthanari, N. Nithyanandam, K. Rajendran, and K. K. Radhakrishnan. 2018. Investigation of Mechanical Properties and Dry Sliding Wear Behaviour of Squeeze Cast LM6 Aluminium Alloy Reinforced with Copper Coated Short Steel Fibers. Transactions of the Indian Institute of Metals 71 (4):813–22. doi: https://doi.org/10.1007/s12666-017-1258-8.
- Chelladurai, S. J. S., R. Arthanari, R. Selvarajan, S. Athanarsamy, S. Arumugam, and G. Veerakumar. 2018. Investigation on Mechanical Properties and Wear Behaviour of Squeeze Cast LM13 Aluminium Alloy Reinforced with Copper Coated Steel Wires. Zeitschrift Für Physikalische Chemie 232 (12):1787–806. doi: https://doi.org/10.1515/zpch-2017-1093.
- Chelladurai, S. J. S., R. Arthanari, R. Selvarajan, R. Kanagaraj, and P. Angappan. 2018. Investigation on Microstructure and Tensile Behaviour of Stir Cast LM13 Aluminium Alloy Reinforced with Copper Coated Short Steel Fibers Using Response Surface Methodology. Transactions of the Indian Institute of Metals 71 (9):2221–30. doi: https://doi.org/10.1007/s12666-018-1353-5.
- Chelladurai, S. J. S., R. Arthanari, R. Selvarajan, T. P. Ravichandran, S. K. Ravi, and S. R. C. Petchimuthu. 2019. Optimisation of Dry Sliding Wear Parameters of Squeeze Cast AA336 Aluminium Alloy: Copper-Coated Steel Wire-Reinforced Composites by Response Surface Methodology. International Journal of Metalcasting 13 (2):354–66. doi: https://doi.org/10.1007/s40962-018-0258-8.
- Chemingui, M., R. Ameur, V. Optasanu, and M. Khitouni. 2019. DSC Analysis of Phase Transformations during Precipitation Hardening in Al–Zn–Mg Alloy (7020). Journal of Thermal Analysis and Calorimetry 136 (5):1887–94. doi: https://doi.org/10.1007/s10973-018-7856-9.
- Das, D. K., P. C. Mishra, S. Singh, and S. Pattanaik. 2014. Fabrication and Heat Treatment of Ceramic-Reinforced Aluminium Matrix Composites – A Review. International Journal of Mechanical and Materials Engineering 9 (1):1–15. doi: https://doi.org/10.1186/s40712-014-0006-7.
- Dasgupta, R. 2012. Aluminium Alloy-Based Metal Matrix Composites: A Potential Material for Wear Resistant Applications. ISRN Metallurgy 2012:1–14. doi: https://doi.org/10.5402/2012/594573.
- Dong, P. Y., H. D. Zhao, F. F. Chen, and J. Wen Li. 2013. Microstructures and Properties of A356-10%SiC Particle Composite Castings at Different Solidification Pressures. Transactions of Nonferrous Metals Society of China 23 (8):2222–8. doi: https://doi.org/10.1016/S1003-6326(13)62721-1.
- Dutta, B., and M. K. Surappa. 1995. Age – Hardening Behaviour of Al-Cu-SiCp Composites Synthesized by Casting Route. Scripta Metallurgica et Materialia 32 (5):731–6. doi: https://doi.org/10.1016/0956-716X(95)91594-F.
- Dutta, B., and M. K. Surappa. 1997. Studies on Age-Hardening Characteristics of Ceramic Particle/Matrix Interfaces in Al-Cu-SiCp Composites Using Ultra Low-Load-Dynamic Microhardness Measurements. Journal of Materials Research 12 (10):2773–8. doi: https://doi.org/10.1557/JMR.1997.0369.
- El-Sayed Seleman, M. M., M. Z. Ahmed, and S. Ataya. 2018. Microstructure and Mechanical Properties of Hot Extruded 6016 Aluminum Alloy/Graphite Composites. Journal of Materials Science & Technology 34 (9):1580–91. doi: https://doi.org/10.1016/j.jmst.2018.03.004.
- Fenghong, C., C. Chang, W. Zhenyu, T. Muthuramalingam, and G. Anbuchezhiyan. 2019. Effects of Silicon Carbide and Tungsten Carbide in Aluminium Metal Matrix Composites. Silicon 11 (6):2625–32. doi: https://doi.org/10.1007/s12633-018-0051-6.
- Gautam, G., and A. Mohan. 2015. Effect of ZrB2 Particles on the Microstructure and Mechanical Properties of Hybrid (ZrB2 + Al3Zr)/AA5052 in situ Composites. Journal of Alloys and Compounds 649:174–83. doi: https://doi.org/10.1016/j.jallcom.2015.07.096.
- Geng, R., F. Qiu, and Q. C. Jiang. 2018. Reinforcement in Al Matrix Composites: A Review of Strengthening Behavior of Nanosized Particles. Advanced Engineering Materials 20 (9):1701089–13. doi: https://doi.org/10.1002/adem.201701089.
- Guo, J. F., H. W. Doty, S. Valtierra, and F. H. Samuel. 2018. Measurement of Particles in Molten Al–Si Alloys Applying the Ultrasonic Technique. International Journal of Metalcasting 12 (2):235–50. doi: https://doi.org/10.1007/s40962-017-0154-7.
- Guo, M. L. T., and C. Y. A. Tsao. 2000. Tribological Behavior of Self-Lubricating Aluminium/SiC/Graphite Hybrid Composites Synthesized by the Semi-Solid Powder-Densification Method. Composites Science and Technology 60 (1):65–74. doi: https://doi.org/10.1016/S0266-3538(99)00106-2.
- Guo, W., M. Yang, Y. Zheng, X. Zhang, H. Li, X. Wen, and J. Zhang. 2013. Influence of Elastic Tensile Stress on Aging Process in an Al-Zn-Mg-Cu Alloy. Materials Letters 106:14–7. doi: https://doi.org/10.1016/j.matlet.2013.04.095.
- Gür, C. H., and İ. Yıldız. 2004. Non-Destructive Investigation on the Effect of Precipitation Hardening on Impact Toughness of 7020 Al-Zn-Mg Alloy. Materials Science and Engineering A 382 (1-2):395–400. doi: https://doi.org/10.1016/j.msea.2004.05.001.
- Hamid, A. A., P. K. Ghosh, S. C. Jain, and S. Ray. 2008. The Influence of Porosity and Particles Content on Dry Sliding Wear of Cast in situ Al(Ti)-Al2O3(TiO2) Composite. Wear 265 (1–2):14–26. doi: https://doi.org/10.1016/j.wear.2007.08.018.
- Hasegawa, T., and K. Okazaki. 2001. Uniform Tensile Elongation Obtained from Experiment and Its Estimation Using Dislocation Dynamics Parameters. Materials Science and Engineering: A 297 (1-2):266–71. doi: https://doi.org/10.1016/S0921-5093(00)01267-3.
- Hashim, J., L. Looney, and M. S. J. Hashmi. 2002. Particle Distribution in Cast Metal Matrix Composites – Part I. Journal of Materials Processing Technology 123 (2):251–5. doi: https://doi.org/10.1016/S0924-0136(02)00098-5.
- Hasson, D. F., S. M. Hoover, and C. R. Crowe. 1985. Effect of Thermal Treatment on the Mechanical and Toughness Properties of Extruded SiCw/Aluminium 6061 Metal Matrix Composite. Journal of Materials Science 20 (11):4147–54. doi: https://doi.org/10.1007/BF00552410.
- Holt, R. T., R. Wallace, W. Wallace, and D. L. DuQuesnay. 1999. RRA Heat Treatment of Large Al 7075-T6 Components, Defense Technical Information Center Compilation Part Notice. RTO AVT Worshop, 1–12.
- Kalyon, A., and D. Özyürek. 2017. Investigation of the Effect of Different Heat Treatments on Wear Behavior of AA7075 Alloy. Acta Physica Polonica A 131 (1):150–2. doi: https://doi.org/10.12693/APhysPolA.131.150.
- Kapranos, P., D. Brabazon, S. P. Midson, S. Naher, and T. Haga. 2014. Advanced Casting Methodologies: Inert Environment Vacuum Casting and Solidification, Die Casting, Compocasting, and Roll Casting. Comprehensive Materials Processing 5:3–37. doi: https://doi.org/10.1016/B978-0-08-096532-1.00503-3.
- Kaushik, N. Ch., and R. N. Rao. 2016. Effect of Applied Load and Grit Size on Wear Coefficients of Al 6082–SiC–Gr Hybrid Composites under Two Body Abrasion. Tribology International 103:298–308. doi: https://doi.org/10.1016/j.triboint.2016.07.018.
- Kurita, H., T. Miyazaki, A. Kawasaki, Y. Lu, and J. F. Silvain. 2015. Interfacial Microstructure of Graphite Flake Reinforced Aluminum Matrix Composites Fabricated via Hot Pressing. Composites Part A: Applied Science and Manufacturing 73:125–31. doi: https://doi.org/10.1016/j.compositesa.2015.03.013.
- Liu, Y., D. M. Jiang, and W. J. Li. 2016. The Effect of Multistage Ageing on Microstructure and Mechanical Properties of 7050 Alloy. Journal of Alloys and Compounds 671:408–18. doi: https://doi.org/10.1016/j.jallcom.2016.01.266.
- Loukus, A., and J. Loukus. 2011. AFS Sponsored Research Heat Treatment Effects on the Mechanical Properties and Microstructure of Preform-Based Squeeze Cast Aluminum Metal Matrix Composites. International Journal of Metalcasting 5 (1):57–65. doi: https://doi.org/10.1007/BF03355508.
- Luiggi, N. J., and M. V. Valera. 2017. Kinetic Study of an AA7075 Alloy under RRA Heat Treatment. Journal of Thermal Analysis and Calorimetry 130 (3):1885–902. doi: https://doi.org/10.1007/s10973-017-6683-8.
- Mahendra, K. V., and K. Radhakrishna. 2010. Characterization of Stir Cast Al-Cu-(Fly Ash + SiC) Hybrid Metal Matrix Composites. Journal of Composite Materials 44 (8):989–1005. doi: https://doi.org/10.1177/0021998309346386.
- Manna, A., P. B. Mahapatra, and H. S. Bains. 2010. Experimental Study on Fabrication of Al-Al2O3/Grp Metal Matrix Composites. Journal of Composite Materials 44 (25):3069–79. doi: https://doi.org/10.1177/0021998310366362.
- Menargues, S., E. Martín, M. T. Baile, and J. A. Picas. 2015. New Short T6 Heat Treatments for Aluminium Silicon Alloys Obtained by Semisolid Forming. Materials Science and Engineering: A 621:236–42. doi: https://doi.org/10.1016/j.msea.2014.10.078.
- Mondal, D. P., N. V. Ganesh, V. S. Muneshwar, S. Das, and N. Ramakrishnan. 2006. Effect of SiC Concentration and Strain Rate on the Compressive Deformation Behaviour of 2014Al-SiCp Composite. Materials Science and Engineering A 433 (1–2):18–31. doi: https://doi.org/10.1016/j.msea.2006.07.007.
- Mondal, D. P., S. Das, K. S. Suresh, and N. Ramakrishnan. 2007. Compressive Deformation Behaviour of Coarse SiC Particle Reinforced Composite: Effect of Age-Hardening and SiC Content. Materials Science and Engineering A 460–461:550–60. doi: https://doi.org/10.1016/j.msea.2007.03.001.
- Mortta, M. 1995. Metal Matrix Composites. Advanced Composite Materials 4 (3):237–46. doi: https://doi.org/10.1163/156855195X00041.
- Mukhopadhyay, A. K. 2009. Microstructure and Properties of High Strength Aluminium Alloys for Structural Applications. Transactions of the Indian Institute of Metals 62 (2):113–22. doi: https://doi.org/10.1007/s12666-009-0015-z.
- Nandana, M. S., K. U. Bhat, and C. M. Manjunatha. 2018. Effect of Retrogression Heat Treatment Time on Microstructure and Mechanical Properties of AA7010. Journal of Materials Engineering and Performance 27 (4):1628–34. doi: https://doi.org/10.1007/s11665-018-3268-z.
- Nur Ismarrubie, Z., K. W. Loh, and H. Yussof. 2013. Effect of Heat Treatment on Mechanical Properties and Susceptibility to Stress Corrosion Cracking of Aluminium Alloy. Advanced Materials Research 845:178–82. doi: https://doi.org/10.4028/www.scientific.net/AMR.845.178.
- Ozden, S., R. Ekici, and F. Nair. 2007. Investigation of Impact Behaviour of Aluminium Based SiC Particle Reinforced Metal-Matrix Composites. Composites Part A: Applied Science and Manufacturing 38 (2):484–94. doi: https://doi.org/10.1016/j.compositesa.2006.02.026.
- Özer, G., and A. Karaaslan. 2019. Effect of RRA Heat Treatment on Corrosion and Mechanical Properties of AA7075. Materials and Corrosion 70 (11):2064–72. doi: https://doi.org/10.1002/maco.201910955.
- Prabhu, T. R. 2016. Investigations of the Effects of Particle Properties on the Wear Resistance of the Particle Reinforced Composites Using a Novel Wear Model. International Journal of Computational Materials Science and Engineering 05 (02):1650013–6. doi: https://doi.org/10.1142/S2047684116500135.
- Prabhu, T. R. 2017. Processing and Properties Evaluation of Functionally Continuous Graded 7075 Al Alloy/SiC Composites. Archives of Civil and Mechanical Engineering 17 (1):20–31. doi: https://doi.org/10.1016/j.acme.2016.08.004.
- Prasad, D. S., C. Shoba, and N. Ramanaiah. 2014. Investigations on Mechanical Properties of Aluminum Hybrid Composites. Journal of Materials Research and Technology 3 (1):79–85. doi: https://doi.org/10.1016/j.jmrt.2013.11.002.
- Ram Prabhu, T., M. Murugan, B. P. Chiranth, R. K. Mishra, N. Rajini, P. Marimuthu, P. Dinesh Babu, and G. Suganya. 2019. Effects of Dual-Phase Reinforcement Particles (Fly Ash + Al2O3) on the Wear and Tensile Properties of the AA 7075 Al Alloy Based Composites. Journal of the Institution of Engineers 100 (1):29–35. doi: https://doi.org/10.1007/s40033-019-00172-7.
- Ramanathan, A., P. K. Krishnan, and R. Muraliraja. 2019. A Review on the Production of Metal Matrix Composites through Stir Casting – Furnace Design, Properties, Challenges, and Research Opportunities. Journal of Manufacturing Processes 42:213–45. doi: https://doi.org/10.1016/j.jmapro.2019.04.017.
- Ranganatha, R., V. A. Kumar, V. S. Nandi, R. R. Bhat, and B. K. Muralidhara. 2013. Multi-Stage Heat Treatment of Aluminum Alloy AA7049. Transactions of Nonferrous Metals Society of China 23 (6):1570–5. doi: https://doi.org/10.1016/S1003-6326(13)62632-1.
- Ravi Kumar, K., T. Pridhar, and V. S. Sree Balaji. 2018. Mechanical Properties and Characterization of Zirconium Oxide (ZrO2) and Coconut Shell Ash(CSA) Reinforced Aluminium (Al 6082) Matrix Hybrid Composite. Journal of Alloys and Compounds 765:171–9. doi: https://doi.org/10.1016/j.jallcom.2018.06.177.
- Ravi, K. R., V. M. Sreekumar, R. M. Pillai, C. Mahato, K. R. Amaranathan, R. Arul Kumar, and B. C. Pai. 2007. Optimization of Mixing Parameters through a Water Model for Metal Matrix Composites Synthesis. Materials & Design 28 (3):871–81. doi: https://doi.org/10.1016/j.matdes.2005.10.007.
- Reddy, P. S., R. Kesavan, and B. Vijaya Ramnath. 2018. Investigation of Mechanical Properties of Aluminium 6061-Silicon Carbide, Boron Carbide Metal Matrix Composite. Silicon 10 (2):495–502. doi: https://doi.org/10.1007/s12633-016-9479-8.
- Rostami, R. B., and M. Tajally. 2014. Improvements in Microstructure and Mechanical Properties of Al-Si-Cu Alloy-Al2O3 Nanocomposite Modified by ZrO2. Journal of Materials Research 29 (21):2505–13. doi: https://doi.org/10.1557/jmr.2014.241.
- Roy, P., S. Singh, and K. Pal. 2017. Enhancement of Mechanical and Tribological Properties of SiC- and CB-Reinforced Aluminium 7075 Hybrid Composites through Friction Stir Processing. Advanced Composite Materials 28 (sup1):1–18. doi: https://doi.org/10.1080/09243046.2017.1405596.
- Sekar, K., K. Allesu, and M. A. Joseph. 2014. Effect of T6 Heat Treatment in the Microstructure and Mechanical Properties of A356 Reinforced with Nano Al2O3 Particles by Combination Effect of Stir and Squeeze Casting. Procedia Materials Science 5:444–53. doi: https://doi.org/10.1016/j.mspro.2014.07.287.
- Senthil Kumar, M., R. V. Mangalaraja, R. Senthil Kumar, and L. Natrayan. 2019. Processing and Characterization of AA2024/Al2O3/SiC Reinforces Hybrid Composites Using Squeeze Casting Technique. Iranian Journal of Materials Science and Engineering 16 (2):55–67. doi: https://doi.org/10.22068/ijmse.16.2.55.
- Sharma, P., S. Sharma, and D. Khanduja. 2016. Effect of Graphite Reinforcement on Physical and Mechanical Properties of Aluminum Metal Matrix Composites. Particulate Science and Technology 34 (1):17–22. doi: https://doi.org/10.1080/02726351.2015.1031924.
- Sharma, P., S. Sharma, and D. Khanduja. 2017. Production and Characterization of AA6082-(Si3N4 + Gr) Stir Cast Hybrid Composites. Particulate Science and Technology 35 (2):158–65. doi: https://doi.org/10.1080/02726351.2016.1143066.
- Sharma, P., S. Sharma, and D. Khanduja. 2015. A Study on Microstructure of Aluminium Matrix Composites. Journal of Asian Ceramic Societies 3 (3):240–4. doi: https://doi.org/10.1016/j.jascer.2015.04.001.
- Shercliff, H. R., and M. F. Ashby. 1990. A Process Model for Age Hardening of Aluminium Alloys-I. The Model. Acta Metallurgica Et Materialia 38 (10):1789–802. doi: https://doi.org/10.1016/0956-7151(90)90291-N.
- Shirvanimoghaddam, K., S. U. Hamim, M. Karbalaei Akbari, S. M. Fakhrhoseini, H. Khayyam, A. H. Pakseresht, E. Ghasali, et al. 2017. Carbon Fiber Reinforced Metal Matrix Composites: Fabrication Processes and Properties. Composites Part A: Applied Science and Manufacturing 92:70–96. doi: https://doi.org/10.1016/j.compositesa.2016.10.032.
- Singh, A. K., S. Soni, and R. S. Rana. 2020. A Critical Review on Synthesis of Aluminum Metallic Composites through Stir Casting: Challenges and Opportunities. Advanced Engineering Materials 22 (10):2000322. doi: https://doi.org/10.1002/adem.202000322.
- Singh, G., and S. Goyal. 2018. Microstructure and Mechanical Behavior of AA6082-T6/SiC/B4C-Based Aluminum Hybrid Composites. Particulate Science and Technology 36 (2):154–61. doi: https://doi.org/10.1080/02726351.2016.1227410.
- Srivastava, N., and G. P. Chaudhari. 2016. Strengthening in Al Alloy Nano Composites Fabricated by Ultrasound Assisted Solidification Technique. Materials Science and Engineering: A 651:241–7. doi: https://doi.org/10.1016/j.msea.2015.10.118.
- Su, H., W. Gao, H. Zhang, H. Liu, J. Lu, and Z. Lu. 2010. Optimization of Stirring Parameters through Numerical Simulation for the Preparation of Aluminum Matrix Composite by Stir Casting Process. Journal of Manufacturing Science and Engineering 132 (6):0610071–7. doi: https://doi.org/10.1115/1.4002851.
- Surappa, M. K., and P. Sivakumar. 1993. Fracture Toughness Evaluation of 2040-Ai/A12O3 Particulate Composites by Instrumented Impact. Composites Science and Technology 46 (3):287–92. doi: https://doi.org/10.1016/0266-3538(93)90162-A.
- Suresh, S., N. Shenbaga Vinayaga Moorthi, S. C. Vettivel, N. Selvakumar, and G. R. Jinu. 2014. Effect of Graphite Addition on Mechanical Behavior of Al6061/TiB2 Hybrid Composite Using Acoustic Emission. Materials Science and Engineering A 612:16–27. doi: https://doi.org/10.1016/j.msea.2014.06.024.
- Tan, C. F., and M. R. Said. 2009. Effect of Hardness Test on Precipitation Hardening Aluminium Alloy 6061-T6. Chiang Mai Journal of Science 36 (3):276–86.
- Unsworth, J. P., and S. Bandyopadhyay. 1994. Effect of Thermal Ageing on Hardness, Tensile and Impact Properties of an Alumina Microsphere-Reinforced Aluminium Metal-Matrix Composite. Journal of Materials Science 29 (17):4645–50. doi: https://doi.org/10.1007/BF00376291.
- Venkatesan, S., and M. Anthony Xavior. 2019. Experimental Investigation on Stir and Squeeze Casted Aluminum Alloy Composites Reinforced with Graphene. Materials Research Express 6 (12):126542. doi: https://doi.org/10.1088/2053-1591/ab568f.
- Vijaya Ramnath, B., C. Elanchezhian, M. Jaivignesh, S. Rajesh, C. Parswajinan, and A. Siddique Ahmed Ghias. 2014. Evaluation of Mechanical Properties of Aluminium Alloy-Alumina-Boron Carbide Metal Matrix Composites. Materials and Design. 58:332-338. doi: https://doi.org/10.1016/j.matdes.2014.01.068.
- Vijeesh, V., and K. N. Prabhu. 2014. Review of Microstructure Evolution in Hypereutectic Al-Si Alloys and Its Effect on Wear Properties. Transactions of the Indian Institute of Metals 67 (1):1–18. doi: https://doi.org/10.1007/s12666-013-0327-x.