Effect of T6, RRA and nano chromium carbide content on microstructure and mechanical properties of AA7075-Cr₃C₂ nanocomposite

References

• Alagarsamy, S. V., and M. Ravichandran. 2019. Synthesis, microstructure and properties of TiO2 reinforced AA7075 matrix composites via stir casting route. Materials Research Express 6 (8):086519.
   Google Scholar
• Aniruddha Ram, H. R., P. G. Koppad, and K. T. Kashyap. 2014. Influence of multiwalled carbon nanotubes on the aging behavior of AA 6061 alloy matrix nanocomposites. Transactions of the Indian Institute of Metals 67 (3):325–9. doi:10.1007/s12666-013-0350-y.
   Web of Science ®Google Scholar
• Azarniya, A., A. K. Taheri, and K. K. Taheri. 2019. Recent advances in ageing of 7xxx series aluminum alloys: A physical metallurgy perspective. Journal of Alloys and Compounds 781:945–83. doi:10.1016/j.jallcom.2018.11.286.
   Web of Science ®Google Scholar
• Azimi, A., A. Shokuhfar, and O. Nejadseyfi. 2015. Mechanically alloyed Al7075-TiC nanocomposite: Powder processing, consolidation and mechanical strength. Materials & Design 66 (PA):137–41. doi:10.1016/j.matdes.2014.10.046.
   Web of Science ®Google Scholar
• Bouvard, D. 2000. Densification behaviour of mixtures of hard and soft powders under pressure. Powder Technology 111 (3):231–9. doi:10.1016/S0032-5910(99)00293-4.
   Web of Science ®Google Scholar
• Casati, R., and M. Vedani. 2014. Metal matrix composites reinforced by nano-particles—A review. Metals 4 (1):65–83. doi:10.3390/met4010065.
   Web of Science ®Google Scholar
• Chen, G., Y. Jin, H. Zhang, F. Han, Q. Chen, J. Xu, and Z. Zhao. 2018. Microstructures and mechanical properties of in-situ Al3Ti/2024Al composites after solution and subsequent aging treatment. Materials Science and Engineering: A 724 (February):181–8. doi:10.1016/j.msea.2018.03.089.
   Google Scholar
• El-Mahallawi, I., H. Abdelkader, L. Yousef, A. Amer, J. Mayer, and A. Schwedt. 2012. Influence of Al2O3 nano-dispersions on microstructure features and mechanical properties of cast and T6 heat-treated Al Si hypoeutectic alloys. Materials Science and Engineering: A 556:76–87. doi:10.1016/j.msea.2012.06.061.
   Web of Science ®Google Scholar
• Fakioglu, A., D. Özyürek, and R. Yilmaz. 2013. Effects of different heat treatment conditions on fatigue behavior of AA7075 alloy. High Temperature Materials and Processes 32 (4):345–51. doi:10.1515/htmp-2012-0146.
   Web of Science ®Google Scholar
• Flores-Campos, R., D. C. Mendoza-Ruiz, P. Amézaga-Madrid, I. Estrada-Guel, M. Miki-Yoshida, J. M. Herrera-Ramírez, and R. Martínez-Sánchez. 2010. Microstructural and mechanical characterization in 7075 aluminum alloy reinforced by silver nanoparticles dispersion. Journal of Alloys and Compounds 495 (2):394–8. doi:10.1016/j.jallcom.2009.10.209.
   Web of Science ®Google Scholar
• Geiger, A. L., and J. A. Walker. 1991. The processing and properties of discontinuously reinforced aluminum composites. JOM 43 (8):8–15. doi:10.1007/BF03221097.
   Web of Science ®Google Scholar
• Goh, C., J. Wei, L. Lee, and M. Gupta. 2007. Properties and deformation behaviour of Mg – Y2O3 nanocomposites. Acta Materialia 55 (15):5115–21. doi:10.1016/j.actamat.2007.05.032.
   Web of Science ®Google Scholar
• Hashim, J., L. Looney, and M. S. J. Hashmi. 2001. The wettability of SiC particles by molten aluminium alloy. Journal of Materials Processing Technology 119 (1–3):324–8. doi:10.1016/S0924-0136(01)00975-X.
   Web of Science ®Google Scholar
• Hernández-Martínez, S. E., J. J. Cruz-Rivera, C. G. Garay-Reyes, C. G. Elias-Alfaro, R. Martínez-Sánchez, and J. L. Hernández-Rivera. 2015. Application of ball milling in the synthesis of AA 7075-ZrO2 metal matrix nanocomposite. Powder Technology 284:40–6. doi:10.1016/j.powtec.2015.06.030.
   Web of Science ®Google Scholar
• Iyengar, S., D. Sethuram, R. Shobha, and P. G. Koppad. 2021. Microstructure, microhardness, and tensile properties of hot-rolled Al6061/TiB2/CeO2 hybrid composites. Journal of the Southern African Institute of Mining and Metallurgy 121 (10):1–548. doi:10.17159/2411-9717/1560/2021.
   Web of Science ®Google Scholar
• Jiang, B., L. Zhenglong, C. Xi, L. Peng, L. Nannan, and C. Yanbin. 2019. Microstructure and mechanical properties of TiB2-reinforced 7075 aluminum matrix composites fabricated by laser melting deposition. Ceramics International 45 (5):5680–92. doi:10.1016/j.ceramint.2018.12.033.
   Web of Science ®Google Scholar
• Kannan, C., and R. Ramanujam. 2018. Effectiveness evaluation of molten salt processing and ultrasonic cavitation techniques during the production of aluminium based hybrid nanocomposites – An experimental investigation. Journal of Alloys and Compounds 751:183–93. doi:10.1016/j.jallcom.2018.04.112.
   Web of Science ®Google Scholar
• Karaaslan, A., I. Kaya, and H. Atapek. 2007. Effect of aging temperature and of retrogression treatment time on the microstructure and mechanical properties of alloy AA 7075. Metal Science and Heat Treatment 49:443–7. doi:10.1007/s11041-007-0083-9.
   Web of Science ®Google Scholar
• Karbalaei Akbari, M., H. R. Baharvandi, and K. Shirvanimoghaddam. 2015. Tensile and fracture behavior of nano/micro TiB2 particle reinforced casting A356 aluminum alloy composites. Materials & Design 66 (PA):150–61. doi:10.1016/j.matdes.2014.10.048.
   Google Scholar
• Karbalaei Akbari, M., O. Mirzaee, and H. R. Baharvandi. 2013. Fabrication and study on mechanical properties and fracture behavior of nanometric Al2O3 particle-reinforced A356 composites focusing on the parameters of vortex method. Materials & Design 46:199–205. doi:10.1016/j.matdes.2012.10.008.
   Web of Science ®Google Scholar
• Kok, M. 2005. Production and mechanical properties of Al2O3 particle-reinforced 2024 aluminium alloy composites. Journal of Materials Processing Technology 161 (3):381–7. doi:10.1016/j.jmatprotec.2004.07.068.
   Web of Science ®Google Scholar
• Koppad, P. G., K. T. Kashyap, V. Shrathinth, T. A. Shetty, and R. G. Koppad. 2013. Microstructure and microhardness of carbon nanotube reinforced copper nanocomposites. Materials Science and Technology 29 (5):605–9. doi:10.1179/1743284712Y.0000000191.
   Web of Science ®Google Scholar
• Kord, S., M. Alipour, M. H. Siadati, M. Kord, and P. Koppad. 2018a. Effects of extrusion and heat treatment conditions on microstructure and mechanical properties of an Al – Zn – Mg – Cu – Er Alloy. Light Metals 2018:451–9. doi:10.1007/978-3-319-72284-9_61.
   Google Scholar
• Kord, S., M. Alipour, M. H. Siadati, M. Kord, and P. Koppad. 2018b. Effects of rare earth Er additions on microstructure and mechanical properties of an Al – Zn – Mg – Cu alloy. Light Metals 2018:441–9. doi:10.1007/978-3-319-72284-9_60.
   Google Scholar
• Kord, S., M. H. Siadati, M. Alipour, H. Amiri, P. G. Koppad, and A. C. Gowda. 2018. Microstructure and mechanical behavior of as cast and hot extruded AlZnMgCu alloy with rare earth erbium additions. Iranian Journal of Materials Science and Engineering 15 (4):62–9. doi:10.22068/ijmse.15.4.62.
   Web of Science ®Google Scholar
• Kumar, A., K. Pal, and S. Mula. 2017. Simultaneous improvement of mechanical strength, ductility and corrosion resistance of stir cast Al7075-2% SiC micro- and nanocomposites by friction stir processing. Journal of Manufacturing Processes 30:1–13. doi:10.1016/j.jmapro.2017.09.005.
   Web of Science ®Google Scholar
• Kumar, R. V., R. Keshavamurthy, C. S. Perugu, P. G. Koppad, and M. Alipour. 2018. Influence of hot rolling on microstructure and mechanical behaviour of Al6061-ZrB2 in-situ metal matrix composites. Materials Science and Engineering: A 738 (June):344–52. doi:10.1016/j.msea.2018.09.104.
   Google Scholar
• Lakshmikanthan, A., S. Bontha, M. Krishna, P. G. Koppad, and T. Ramprabhu. 2019. Microstructure, mechanical and wear properties of the A357 composites reinforced with dual sized SiC particles. Journal of Alloys and Compounds 786:570–80. doi:10.1016/j.jallcom.2019.01.382.
   Web of Science ®Google Scholar
• Lakshmikanthan, A., R. P. T, S. B. Udayagiri, P. G. Koppad, M. Gupta, K. Munishamaiah, and S. Bontha. 2020. The effect of heat treatment on the mechanical and tribological properties of dual size SiC reinforced A357 matrix composites. Journal of Materials Research and Technology 9 (3):6434–52. doi:10.1016/j.jmrt.2020.04.027.
   Google Scholar
• Li, J. F., Z. W. Peng, C. X. Li, Z. Q. Jia, W. J. Chen, and Z. Q. Zheng. 2008. Mechanical properties, corrosion behaviors and microstructures of 7075 aluminium alloy with various aging treatments. Transactions of Nonferrous Metals Society of China 18 (4):755–62. doi:10.1016/S1003-6326(08)60130-2.
   Web of Science ®Google Scholar
• Lim, J. Y., S. I. Oh, Y. C. Kim, K. K. Jee, Y. M. Sung, and J. H. Han. 2012. Effects of CNF dispersion on mechanical properties of CNF reinforced A7xxx nanocomposites. Materials Science and Engineering: A 556:337–42. doi:10.1016/j.msea.2012.06.096.
   Web of Science ®Google Scholar
• Mallikarjuna, H. M., C. Siddaraju, H. S. S. Kumar, and P. G. Koppad. 2020. Nanohardness and wear behavior of copper-SiC-CNTs nanocomposites. FME Transactions 48 (3):688–92. doi:10.5937/fme2003688M.
   Web of Science ®Google Scholar
• Mirjavadi, S. S., M. Alipour, A. M. S. Hamouda, S. Kord, P. G. Koppad, Y. A. Abuzin, and R. Keshavamurthy. 2018. Effect of hot extrusion and T6 heat treatment on microstructure and mechanical properties of Al-10Zn-3.5Mg-2.5Cu nanocomposite reinforced with graphene nanoplatelets. Journal of Manufacturing Processes 36 (October):264–71. doi:10.1016/j.jmapro.2018.10.026.
   Google Scholar
• Mirjavadi, S. S., M. Alipour, A. M. S. Hamouda, A. Matin, S. Kord, B. M. Afshari, and P. G. Koppad. 2017. Effect of multi-pass friction stir processing on the microstructure, mechanical and wear properties of AA5083/ZrO2 nanocomposites. Journal of Alloys and Compounds 726:1262–73. doi:10.1016/j.jallcom.2017.08.084.
   Web of Science ®Google Scholar
• Mobasherpour, I., A. A. Tofigh, and M. Ebrahimi. 2013. Effect of nano-size Al2O3 reinforcement on the mechanical behavior of synthesis 7075 aluminum alloy composites by mechanical alloying. Materials Chemistry and Physics 138 (2–3):535–41. doi:10.1016/j.matchemphys.2012.12.015.
   Web of Science ®Google Scholar
• Morovvati, M. R., A. Lalehpour, and A. Esmaeilzare. 2016. Effect of nano/micro B4C and SiC particles on fracture properties of aluminum 7075 particulate composites under chevron-notch plane strain fracture toughness test. Materials Research Express 3 (12):125026. doi:10.1088/2053-1591/3/12/125026.
   Web of Science ®Google Scholar
• Naeem, H. T., and K. S. Mohammed. 2015. Effect of Al2O3 particulates on the properties of the sintered Al-Zn-Mg-Cu-Ni-Co alloy after T6 and RRA treatments. 10 (2):445–54.
   Google Scholar
• Naik, M., L. H. Manjunath, V. Koti, A. Lakshmikanthan, P. Koppad, and S. Kumaran. 2021. Al/graphene/CNT hybrid composites: Hardness and sliding wear studies. FME Transactions 49 (2):414–21. doi:10.5937/fme2102414N.
   Web of Science ®Google Scholar
• Nemati, N., R. Khosroshahi, M. Emamy, and A. Zolriasatein. 2011. Investigation of microstructure, hardness and wear properties of Al-4.5wt.% Cu-TiC nanocomposites produced by mechanical milling. Materials & Design 32 (7):3718–29. doi:10.1016/j.matdes.2011.03.056.
   Web of Science ®Google Scholar
• Ozer, G., and A. Karaaslan. 2017. Properties of AA7075 aluminum alloy in aging and retrogression and reaging process. Transactions of Nonferrous Metals Society of China 27 (11):2357–62. doi:10.1016/S1003-6326(17)60261-9.
   Web of Science ®Google Scholar
• Prabhakaran, S., H. G. P. Kumar, S. Kalainathan, V. K. Vasudevan, P. Shukla, and D. Lin. 2019. Laser shock peening modified surface texturing, microstructure and mechanical properties of graphene dispersion strengthened aluminium nanocomposites. Surfaces and Interfaces 14:127–37. (December 2018),. doi:10.1016/j.surfin.2018.12.003.
   Web of Science ®Google Scholar
• Puneeth, N., J. Satheesh, V. Koti, P. G. Koppad, M. R. Akbarpour, and G. J. Naveen. 2019. Application of Taguchi’s method to study the effect of processing parameters of Al6082/B4C/Al2SiO5 hybrid composites on mechanical properties. Materials Research Express 6 (10):1065a1. doi:10.1088/2053-1591/ab3c16.
   Web of Science ®Google Scholar
• Ram, H. R. A., P. G. Koppad, and K. T. Kashyap. 2013. Nanoindentation studies on MWCNT/aluminum alloy 6061 nanocomposites. Materials Science and Engineering: A 559:920–3. doi:10.1016/j.msea.2012.08.143.
   Web of Science ®Google Scholar
• Ramezanalizadeh, H., M. Emamy, and M. Shokouhimehr. 2015. A novel aluminum based nanocomposite with high strength and good ductility. Journal of Alloys and Compounds 649:461–73. doi:10.1016/j.jallcom.2015.07.088.
   Web of Science ®Google Scholar
• Raturi, A., K. K. S. Mer, and P. Kumar Pant. 2017. Synthesis and characterization of mechanical, tribological and micro structural behaviour of Al 7075 matrix reinforced with nano Al2O3 particles. Materials Today: Proceedings 4 (2):2645–58. doi:10.1016/j.matpr.2017.02.139.
   Google Scholar
• Rometsch, P. A., Y. Zhang, and S. Knight. 2014. Heat treatment of 7xxx series aluminium alloys – Some recent developments. Transactions of Nonferrous Metals Society of China, 24 (7):2003–17. doi:10.1016/S1003-6326(14)63306-9.
   Web of Science ®Google Scholar
• Roy, P., S. Singh, and K. Pal. 2017. Enhancement of mechanical and tribological properties of SiC- and CB-reinforced aluminium 7075 hybrid composites through friction stir processing. Advanced Composite Materials 28 (sup1):1–18. doi:10.1080/09243046.2017.1405596.
   Web of Science ®Google Scholar
• Sethuram, D., P. G. Koppad, H. Shetty, M. Alipour, and S. Kord. 2018. Characterization of graphene reinforced Al-Sn nanocomposite produced by mechanical alloying and vacuum hot pressing. Materials Today: Proceedings 5 (11):24505–14. doi:10.1016/j.matpr.2018.10.247.
   Google Scholar
• Sethurama, D., R. Keshavamurthy, S. Paljor, P. E. Rohit, and P. G. Koppad. 2020. Effect of multiple reinforcements (CNT/Si3N4) on hardness, electrical conductivity and friction coefficient of aluminium hybrid composites. Journal of Physics: Conference Series 1455 (1): 012011. doi:10.1088/1742-6596/1455/1/012011.
   Google Scholar
• Shivananda Murthy, K. V., D. P. Girish, R. Keshavamurthy, T. Varol, and P. G. Koppad. 2017. Mechanical and thermal properties of AA7075/TiO2/fly ash hybrid composites obtained by hot forging. Progress in Natural Science: Materials International 27 (4):474–81. doi:10.1016/j.pnsc.2017.08.005.
   Web of Science ®Google Scholar
• Singh, J., and A. Chauhan. 2016. Characterization of hybrid aluminum matrix composites for advanced applications – A review. Journal of Materials Research and Technology 5 (2):159–69. doi:10.1016/j.jmrt.2015.05.004.
   Google Scholar
• Sirajudeen, N., M. Abdur Rahman, S. Haque, R. Karunanithi, and S. Patnaik. 2019. Influence of aging & varying weight fraction of Al2O3 particles on the mechanical behaviour & volumetric wear rate of Al 7075 alloy composite produced by liquid metallurgy route. Materials Research Express 6 (8):086597. doi:10.1088/2053-1591/ab20b8.
   Web of Science ®Google Scholar
• Su, H., W. L. Gao, H. Zhang, H. B. Liu, J. Lu, and Z. Lu. 2012. Study on preparation of large sized nanoparticle reinforced aluminium matrix composite by solid-liquid mixed casting process. Materials Science and Technology 28 (2):178–83. doi:10.1179/1743284711Y.0000000009.
   Web of Science ®Google Scholar
• Su, H., W. Gao, Z. Feng, and Z. Lu. 2012. Processing, microstructure and tensile properties of nano-sized Al2O3 particle reinforced aluminum matrix composites. Materials & Design 36:590–6. doi:10.1016/j.matdes.2011.11.064.
   Web of Science ®Google Scholar
• Su, R., Y. Qu, and R. Li. 2014. Effect of aging treatments on the mechanical and corrosive behaviors of spray-formed 7075 alloy. Journal of Materials Engineering and Performance 23 (11):3842–8. doi:10.1007/s11665-014-1186-2.
   Web of Science ®Google Scholar
• Sunar, T., T. Tuncay, D. Özyürek, and M. Gürü. 2020. Investigation of mechanical properties of AA7075 alloys aged by various heat treatments. Physics of Metals and Metallography 121 (14):1440–6. doi:10.1134/S0031918X20140161.
   Web of Science ®Google Scholar
• Surappa, M. K., S. V. Prasad, and P. K. Rohatgi. 1982. Wear and abrasion of cast Al-alumina particle composites. Wear 77(3):295–302.
   Google Scholar
• Wu, C., G. Luo, J. Zhang, Q. Shen, Z. Gan, J. Liu, and L. Zhang. 2018. Influence of length-scale on stabilization of boron carbide in Al-based metal matrix composites during plasma activated sintering. Powder Technology 339:809–16. doi:10.1016/j.powtec.2018.08.073.
   Web of Science ®Google Scholar
• Zhang, H., N. Maljkovic, and B. S. Mitchell. 2002. Structure and interfacial properties of nanocrystalline aluminum/mullite composites. Materials Science and Engineering: A 326 (2):317–23. doi:10.1016/S0921-5093(01)01500-3.
   Web of Science ®Google Scholar
• Zhang, H., Y. He, and L. Li. 2008. Tensile deformation and fracture behavior of spray-deposition 7075/15SiCp aluminum matrix composite sheet at elevated temperatures. Materials Characterization 59 (8):1078–82. doi:10.1016/j.matchar.2007.08.027.
   Web of Science ®Google Scholar
• Zhang, P. X., H. Yan, W. Liu, X. L. Zou, and B. B. Tang. 2019. Effect of T6 heat treatment on microstructure and hardness of nanosized Al2O3 reinforced 7075 aluminum matrix composites. Metals 9 (1):44. doi:10.3390/met9010044.
   Web of Science ®Google Scholar
• Zhou, W., and Z. M. Xu. 1997. Casting of SiC reinforced metal matrix composites. Journal of Materials Processing Technology 63 (1-3):358–363.
   Google Scholar
• Zhou, Y., N. Zhao, C. Shi, E. Liu, X. Du, and C. He. 2014. In-situ processing and aging behaviors of MgAl2O4 spinel whisker reinforced 6061Al composite. Materials Science and Engineering: A 598:114–21. doi:10.1016/j.msea.2013.12.086.
   Web of Science ®Google Scholar