References
- Andersen, A. A. 1966. A sampler for respiratory health hazard assessment. Am. Ind. Hyg. Assoc. J. 27 (2):160–65. doi:https://doi.org/10.1080/00028896609342810.
- Andreassi, L., S. Ubertini, and L. Allocca. 2007. Experimental and numerical analysis of high pressure diesel spray–wall interaction. Int. J. Multiphase Flow 33 (7):742–65. doi:https://doi.org/10.1016/j.ijmultiphaseflow.2007.01.003.
- Angioletti, M., E. Nino, and G. Ruocco. 2005. CFD turbulent modelling of jet impingement and its validation by particle image velocimetry and mass transfer measurements. Int. J. Therm. Sci. 44 (4):349–56. doi:https://doi.org/10.1016/j.ijthermalsci.2004.11.010.
- Anh Ho, C., and M. Sommerfeld. 2002. Modelling of micro-particle agglomeration in turbulent flows. Chem. Eng. Sci. 57 (15):3073–84. doi:https://doi.org/10.1016/S0009-2509(02)00172-0.
- Arffman, A., M. Marjamäki, and J. Keskinen. 2011. Simulation of low pressure impactor collection efficiency curves. J. Aerosol Sci. 42 (5):329–40. doi:https://doi.org/10.1016/j.jaerosci.2011.02.006.
- Behnia, M., S. Parneix, and P. A. Durbin. 1998. Prediction of heat transfer in an axisymmetric turbulent jet impinging on a flat plate. Int. J. Heat Mass Transfer 41 (12):1845–55. doi:https://doi.org/10.1016/S0017-9310(97)00254-8.
- Behnia, M., S. Parneix, Y. Shabany, and P. A. Durbin. 1999. Numerical study of turbulent heat transfer in confined and unconfined impinging jets. Int. J. Heat Fluid Flow 20 (1):1–9. doi:https://doi.org/10.1016/S0142-727X(98)10040-1.
- Bevington, P. R., and D. K. Robinson. 2003. Data reduction and error analysis for the physical sciences. 3rd ed. New York: McGraw-Hill.
- Blomquist, G., G. Strom, and L. H. Stromquist. 1984. Sampling of high concentrations of airborne fungi. Scand. J. Work. Environ. Health 10 (2):109–13. doi:https://doi.org/10.5271/sjweh.2357.
- Caporaloni, M., F. Tampieri, F. Trombetti, and O. Vittori. 1975. Transfer of Particles in Nonisotropic Air Turbulence. J. Atmos. Sci. 32 (3):565–8. doi:https://doi.org/10.1175/1520-0469(1975)032<0565:TOPINA>2.0.CO;2.
- Chen, M., F. J. Romay, L. Li, A. Naqwi, and V. A. Marple. 2016. A novel quartz crystal cascade impactor for real-time aerosol mass distribution measurement. Aerosol Sci. Technol. 50 (9):971–83. doi:https://doi.org/10.1080/02786826.2016.1213790.
- Craft, T. J., L. J. W. Graham, and B. E. Launder. 1993. Impinging jet studies for turbulence model assessment—II. An examination of the performance of four turbulence models. Int. J. Heat Mass Transfer 36 (10):2685–97. doi:https://doi.org/10.1016/S0017-9310(05)80205-4.
- Durbin, P. A. 1993. A Reynolds stress model for near-wall turbulence. J. Fluid Mech. 249 (1):465–98. doi:https://doi.org/10.1017/S0022112093001259.
- Durbin, P. A. 2018. Some recent developments in turbulence closure modeling. Annu. Rev. Fluid Mech. 50 (1):77–103. doi:https://doi.org/10.1146/annurev-fluid-122316-045020.
- Elghobashi, S. 1994. On predicting particle-laden turbulent flows. Appl. Sci. Res. 52 (4):309–29. doi:https://doi.org/10.1007/BF00936835.
- Feng, J. Q. 2017. A computational study of particle deposition patterns from a circular laminar jet. J. Appl. Fluid Mech. 10 (4):1001–12. doi:https://doi.org/10.18869/acadpub.jafm.73.241.27233.
- Feng, J. Q. 2018. Mist flow visualization for round jets in Aerosol Jet® printing. Aerosol Sci. Technol. 51 (3):1–8. doi:https://doi.org/10.1080/02786826.2018.1532566.
- Feng, J. Q., and M. J. Renn. 2019. Aerosol Jet® direct-write for microscale additive manufacturing. J. Micro Nano Manuf. 7 (1):011004. doi:https://doi.org/10.1115/1.4043595.
- Fénot, M., X. T. Trinh, and E. Dorignac. 2019. Flow and heat transfer of a compressible impinging jet. Int. J. Therm. Sci. 136:357–69. doi:https://doi.org/10.1016/j.ijthermalsci.2018.10.035.
- Ghadimi, P., M. Yousefifard, and H. Nowruzi. 2017. Particle and gas flow modeling of wall-impinging diesel spray under ultra-high fuel injection pressures. J. Appl. Fluid Mech. 10 (5):1283–91. doi:https://doi.org/10.18869/acadpub.jafm.73.242.27259.
- Gosman, A. D., and E. Loannides. 1983. Aspects of computer simulation of liquid-fueled combustors. Energy. J. 7 (6):482–90. doi:https://doi.org/10.2514/3.62687.
- Jambunathan, K., E. Lai, M. A. Moss, and B. L. Button. 1992. A review of heat transfer data for single circular jet impingement. Int. J. Heat Fluid Flow 13 (2):106–15. doi:https://doi.org/10.1016/0142-727X(92)90017-4.
- Jaramillo, J. E., F. X. Trias, A. Gorobets, C. D. Prez-Segarra, and A. Oliva. 2012. DNS and RANS modelling of a turbulent plane impinging jet. Int. J. Heat Mass Transfer 55 (4):789–801. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2011.10.031.
- Jones, C. S., X. Lu, M. Renn, M. Stroder, and W.-S. Shih. 2010. Aerosol-jet-printed, high-speed, flexible thin-film transistor made using single-walled carbon nanotube solution. Microelectron. Eng. 87 (3):434–7. doi:https://doi.org/10.1016/j.mee.2009.05.034.
- Li, Q., T-m Cai, G-q He, and C-b Hu. 2006. Droplet collision and coalescence model. Appl. Math. Mech. 27 (1):67–73.
- Li, W., J. Ren, J. Hongde, and P. Ligrani. 2016. Assessment of six turbulence models for modeling and predicting narrow passage flows, part 1: Impingement jets. Numer. Heat Transf. Part A Appl. 69 (2):109–27. doi:https://doi.org/10.1080/10407782.2015.1069665.
- Litchford, R. J., and S.-M. Jeng. 1991. Efficient statistical transport model for turbulent particle dispersion in sprays. AIAA J. 29 (9):1443–51. doi:https://doi.org/10.2514/3.59965.
- Liu, T., J. Nink, P. Merati, T. Tian, Y. Li, and T. Shieh. 2010. Deposition of micron liquid droplets on wall in impinging turbulent air jet. Exp. Fluids 48 (6):1037–57. doi:https://doi.org/10.1007/s00348-009-0790-7.
- Marchioli, C., and A. Soldati. 2002. Mechanisms for particle transfer and segregation in a turbulent boundary layer. J. Fluid Mech. 468:283–315. doi:https://doi.org/10.1017/S0022112002001738.
- Marple, V., B. Olson, F. Romay, G. Hudak, S. M. Geerts, and D. Lundgren. 2014. Second generation micro-orifice uniform deposit impactor, 120 MOUDI-II: Design, evaluation, and application to long-term ambient sampling. Aerosol Sci. Technol. 48 (4):427–33. doi:https://doi.org/10.1080/02786826.2014.884274.
- Marple, V., K. Rubow, G. Ananth, and H. J. Fissan. 1986. Micro-orifice uniform deposit impactor. J. Aerosol Sci. 17 (3):489–94. doi:https://doi.org/10.1016/0021-8502(86)90141-2.
- Mette, A., P. L. Richter, M. Hörteis, and S. W. Glunz. 2007. Metal aerosol jet printing for solar cell metallization. Prog. Photovolt Res. Appl. 15 (7):621–7. doi:https://doi.org/10.1002/pip.759.
- Meyer, C. J., and D. A. Deglon. 2011. Particle collision modeling—A review. Miner. Eng. 24 (8):719–30. doi:https://doi.org/10.1016/j.mineng.2011.03.015.
- Morsi, S. A., and A. J. Alexander. 1972. An investigation of particle trajectories in two-phase flow systems. J. Fluid Mech. 55 (02):193–208. doi:https://doi.org/10.1017/S0022112072001806.
- Mottaghi, P., M. Abbasalizadeh, and H. Ahmady-Birgani. 2019. Depositional arrangement of non-spherical atmospheric particles on impaction plate of a multi-nozzle impactor. Aerosol Sci. Technol. 53 (12):1381–92.
- Mundo, C., M. Sommerfeld, and C. Tropea. 1995. Droplet-wall collisions: Experimental studies of the deformation and breakup process. Int. J. Multiphase Flow 21 (2):151–73. doi:https://doi.org/10.1016/0301-9322(94)00069-V.
- O’Rourke, P. J. 1981. Collective Drop Effects on Vaporizing Liquid Sprays. Princeton, NJ: Princeton University.
- Oesterle, B., and A. Petitjean. 1993. Simulation of particle-to-particle interactions in gas solid flows. Int. J. Multiphase Flow 19 (1):199–211. doi:https://doi.org/10.1016/0301-9322(93)90033-Q.
- Otto, E., H. Fissan, S. H. Park, and K. W. Lee. 1999. The log-normal size distribution theory of brownian aerosol coagulation for the entire particle size range: Part II—Analytical solution using Dahneke’s coagulation kernel. J. Aerosol Sci. 30 (1):17–34. doi:https://doi.org/10.1016/S0021-8502(98)00038-X.
- Ounis, H., G. Ahmadi, and J. B. McLaughlin. 1991. Brownian diffusion of submicrometer particles in the viscous sublayer. J. Colloid Interface Sci. 143 (1):266–77. doi:https://doi.org/10.1016/0021-9797(91)90458-K.
- Reeks, M. W. 1983. The transport of discrete particles in inhomogeneous turbulence. J. Aerosol Sci. 14 (6):729–39. doi:https://doi.org/10.1016/0021-8502(83)90055-1.
- Saffman, P. G., and J. S. Turner. 1956. On the collision of drops in turbulent clouds. J. Fluid Mech. 1 (01):16–30. doi:https://doi.org/10.1017/S0022112056000020.
- Satake, S. i., and T. Kunugi. 1998. Direct numerical simulation of an impinging jet into parallel disks. Int. J. Num. Meth. HFF. 8 (7):768–80. doi:https://doi.org/10.1108/09615539810232871.
- Schmidt, D. P., and C. J. Rutland. 2000. A new droplet collision algorithm. Comput. Phys. 164 (1):62–80. doi:https://doi.org/10.1006/jcph.2000.6568.
- Šikalo, Š., C. Tropea, and E. N. Ganić. 2005. Impact of droplets onto inclined surfaces. J. Colloid Interface Sci. 286 (2):661–9. doi:https://doi.org/10.1016/j.jcis.2005.01.050.
- Sommerfeld, M. 2001. Validation of a stochastic Lagrangian modelling approach for inter-particle collisions in homogeneous isotropic turbulence. Int. J. Multiphase Flow 27 (10):1829–58. doi:https://doi.org/10.1016/S0301-9322(01)00035-0.
- Strömgren, T., G. Brethouwer, G. Amberg, and A. V. Johansson. 2012. Modelling of turbulent gas-particle flows with focus on two-way coupling effects on turbophoresis. Powder Technol. 224:36–45. doi:https://doi.org/10.1016/j.powtec.2012.02.017.
- Tait, J. G., E. Witkowska, M. Hirade, T.-H. Ke, P. E. Malinowski, S. Steudel, C. Adachi, and P. Heremans. 2015. Uniform Aerosol Jet printed polymer lines with 30µm width for 140ppi resolution RGB organic light emitting diodes. Org. Electron. 22:40–3. doi:https://doi.org/10.1016/j.orgel.2015.03.034.
- Tian, L., and G. Ahmadi. 2007. Particle deposition in turbulent duct flows—Comparisons of different model predictions. J. Aerosol Sci. 38 (4):377–97. doi:https://doi.org/10.1016/j.jaerosci.2006.12.003.
- Wang, C., S. Chang, M. Leng, H. Wu, and B. Yang. 2016. A two-dimensional splashing model for investigating impingement characteristics of supercooled large droplets. Int. J. Multiphase Flow 80:131–49. doi:https://doi.org/10.1016/j.ijmultiphaseflow.2015.12.005.
- Wang, L.-P., A. S. Wexler, and Y. Zhou. 1998. Statistical mechanical descriptions of turbulent coagulation. Phys. Fluids 10 (10):2647–51.
- Wang, L.-P., A. S. Wexler, and Y. Zhou. 2000. Statistical mechanical description and modelling of turbulent collision of inertial particles. J. Fluid Mech. 415:117–53. doi:https://doi.org/10.1017/S0022112000008661.
- Wierzba, A. 1990. Deformation and breakup of liquid drops in a gas stream at nearly critical Weber numbers. Exp. Fluids 9 (1-2):59–64. doi:https://doi.org/10.1007/BF00575336.
- Wu, J., J. Xu, and H. Wang. 2018. Numerical simulation of micron and submicron droplets in jet impinging. Adv. Mech. Eng. 10 (10):168781401880531. doi:https://doi.org/10.1177/1687814018805319.
- Xu, J., H. Shen, and H. Wang. 2015. An industry-scale modeling for the turbulence agglomeration of fine particles. Adv. Mech. Eng. 7 (11):168781401561767. doi:https://doi.org/10.1177/1687814015617670.
- Zaichik, L. I., and A. L. Solov’ev. 2002. Collision and coagulation nuclei under conditions of brownian and turbulent motion of aerosol particles. High Temp. 40 (3):422–7.
- Zhang, J., J. Mi, and H. Wang. 2012. A new mesh-independent model for droplet/particle collision. Aerosol Sci. Technol. 46 (6):622–30. doi:https://doi.org/10.1080/02786826.2011.649809.
- Zhang, Z., P. X. Jiang, X. L. Ouyang, J. N. Chen, and D. M. Christopher. 2014. Experimental investigation of spray cooling on smooth and micro-structured surfaces. Int. J. Heat Mass Transfer 76:366–75. doi:https://doi.org/10.1016/j.ijheatmasstransfer.2014.04.010.
- Zhao, D., T. Liu, J. G. Park, M. Zhang, J.-M. Chen, and B. Wang. 2012. Conductivity enhancement of aerosol-jet printed electronics by using silver nanoparticles ink with carbon nanotubes. Microelectron. Eng 96:71–5. doi:https://doi.org/10.1016/j.mee.2012.03.004.
- Zhou, T., D. Xu, J. Chen, C. Cao, and T. Ye. 2016. Numerical analysis of turbulent round jet impingement heat transfer at high temperature difference. Appl. Therm. Eng. 100:55–61. doi:https://doi.org/10.1016/j.applthermaleng.2016.02.006.
- Zhou, Y., A. S. Wexler, and L.-P. Wang. 2001. Modelling turbulent collision of bidisperse inertial particles. J. Fluid Mech. 433:77–104. doi:https://doi.org/10.1017/S0022112000003372.
- Zuckerman, N., and N. Lior. 2006. Jet impingement heat transfer: Physics, correlations, and numerical modeling. Advances in heat transfer 39:565–631. doi:https://doi.org/10.1016/S0065-2717(06)39006-5.