References
- Algre, E., U. Soysal, F. Marty, C. Motzkus, E. Robine, B. Berthelot, and E. Gehin. 2020. Capteur de particules fines avec microbalances en cascade. WO2020044000A1.
- Dahneke, B. 1971. The capture of aerosol particles by surfaces. J. Colloid Interface Sci. 37(2):342–53. doi:https://doi.org/10.1016/0021-9797(71)90302-X.
- Fredericks, S., and J. R. Saylor. 2018. Ring-shaped deposition patterns in small nozzle-to-plate distance impactors. Aerosol Sci. Technol. 52(1):30–7. doi:https://doi.org/10.1080/02786826.2017.1377829.
- García-Ruiz, E., F. J. Romay, J. A. García, J. F. Cambra, L. Alonso, and J. A. Legarreta. 2019. Effect of nozzle spacing in the formation of primary and secondary deposits in multi-nozzle inertial impactors part I: Experimental study. J. Aerosol Sci. 136:61–81. doi:https://doi.org/10.1016/j.jaerosci.2019.06.008.
- Ibrahim, A. H., P. F. Dunn, and R. M. Brach. 2003. Microparticle detachment from surfaces exposed to turbulent air flow: Controlled experiments and modeling. J. Aerosol Sci. 34(6):765–82. doi:https://doi.org/10.1016/S0021-8502(03)00031-4.
- May, K. R. 1945. The cascade impactor: An instrument for sampling coarse aerosols. J. Sci. Instrum. 22(10):187–95. doi:https://doi.org/10.1088/0950-7671/22/10/303.
- May, K. R. 1975. Aerosol impaction jets. J. Aerosol Sci. 6(6):403–11. doi:https://doi.org/10.1016/0021-8502(75)90056-7.
- Michaud, D., P. Picard, and M. Baril. 1999. A versatile flat-deposit impactor-type aerosol collector part 2: Calibration and quantitative study. Aerosol Sci. Technol. 31(5):338–49. doi:https://doi.org/10.1080/027868299304066.
- Nguyen, K. N., D. Abi-Saab, P. Basset, E. Richalot, M. Malak, N. Pavy, F. Flourens, F. Marty, D. Angelescu, Y. Leprince-Wang, et al. 2012. Study of black silicon obtained by cryogenic plasma etching: approach to achieve the hot spot of a thermoelectric energy harvester. Microsyst. Technol. 18(11):1807–14. doi:https://doi.org/10.1007/s00542-012-1486-0.
- Oodo, T., Y. Takashima, and M. Hanzawa. 1981. An experimental study of adhesion of particles with a round nozzle impactor. J. Chem. Eng. Jpn. 14(1):76–8. doi:https://doi.org/10.1252/jcej.14.76.
- Paw U, K. T. 1983. The rebound of particles from natural surfaces. J. Colloid Interface Sci. 93(2):442–52. doi:https://doi.org/10.1016/0021-9797(83)90428-9.
- Rocklage, J. M., V. A. Marple, and B. A. Olson. 2013. Study of secondary deposits in multiple round nozzle impactors. Aerosol Sci. Technol. 47(10):1144–51. doi:https://doi.org/10.1080/02786826.2013.823641.
- Sethi, V., and W. John. 1993. Particle impaction patterns from a circular jet. Aerosol Sci. Technol. 18(1):1–10. doi:https://doi.org/10.1080/02786829308959580.
- Soysal, U., E. Géhin, E. Algré, B. Berthelot, G. Da, and E. Robine. 2017. Aerosol mass concentration measurements: Recent advancements of real-time nano/micro systems. J. Aerosol Sci. 114:42–54. doi:https://doi.org/10.1016/j.jaerosci.2017.09.008.
- Soysal, U., F. Marty, E. Géhin, C. Motzkus, and E. Algré. 2020. Fabrication, electrical characterization and sub-ng mass resolution of sub-µm air-gap bulk mode MEMS mass sensors for the detection of airborne particles. Microelectron. Eng. 221:111190. doi:https://doi.org/10.1016/j.mee.2019.111190.
- Willeke, K., and R. E. Pavlik. 1979. Secondary effects in particle-size classification by opposing jets. J. Aerosol Sci. 10(1):1–10. doi:https://doi.org/10.1016/0021-8502(79)90130-7.
- Ziskind, G., M. Fichman, and C. Gutfinger. 1995. Resuspension of particulates from surfaces to turbulent flows—Review and analysis. J. Aerosol Sci. 26(4):613–44. doi:https://doi.org/10.1016/0021-8502(94)00139-P.