References
- B. Bowman and K. Krüger: ‘Arc furnace physics furnace physics’, 2009, Düsseldorf, Verlag Stahleisen.
- A. Fontana: ‘The modern electric arc furnace in steelmaking’, 2011, Melbourne, Faculty of Engineering and Industrial Sciences, Swinburne University of Technology.
- S. Sabah and G. Brooks: ‘Study of cavity modes in BOF by analysis of sound’, Ironmak. Steelmak., 2016, 1–8, doi:10.1080/03019233.2015.1113755.
- N. Timoshenko, A. Semko and S. Timoshenko: ‘Modelling of electric arc furnace off-gas removal system’, Ironmak. Steelmak., 2014, 41, (4), 257–261. doi: 10.1179/1743281213Y.0000000163
- F. Wang, Z. Jin and Z. Zhu: ‘Numerical study of dc arc plasma and molten bath in dc electric arc furnace’, Ironmak. Steelmak., 2006, 33, (1), 39–44. doi: 10.1179/174328105X71326
- G. Lazaroiu and D. Zaninelli: ‘A control system for dc arc furnaces for power quality improvements’, Electr. Power Syst. Res., 2010, 80, (12), 1498–1505. doi: 10.1016/j.epsr.2010.06.007
- Y.-J. Liu, G. W. Chang and R.-C. Hong: ‘Curve-fitting-based method for modeling voltage–current characteristic of an ac electric arc furnace’, Electr. Power Syst. Res., 2010, 80, (5), 572–581. doi: 10.1016/j.epsr.2009.10.015
- B. Park, H. Lee, G. Jang and B. Han: ‘A fault analysis of DC electric arc furnaces with SVC harmonic filters in a mini-mill plant’, Electr. Power Syst. Res., 2010, 80, (7), 807–814. doi: 10.1016/j.epsr.2009.12.005
- B. M. Dehkordi, M. Moallem and A. Parsapour: ‘Predicting foaming slag quality in electric arc furnace using power quality indices and fuzzy method’, IEEE Trans. Instrum. Meas., 2011, 60, (12), 3845–3852. doi: 10.1109/TIM.2010.2085190
- E. Pretorius, H. Oltmann and J. Jones: ‘EAF fundamentals’, New York, PA, LWB Refractories.
- V. Logar and I. Škrjanc: ‘Modeling and validation of the radiative heat transfer in an electric arc furnace’, ISIJ Int., 2012, 52, (7), 1225–1232. doi: 10.2355/isijinternational.52.1225
- J. Sanchez, A. Conejo and M. Ramirez-Argaez: ‘Effect of foamy slag height on hot spots formation inside the electric arc furnace based on a radiation model’, ISIJ Int., 2012, 52, (5), 804–813. doi: 10.2355/isijinternational.52.804
- E. B. Pretorius and R. C. Nunnington: ‘Stainless steel slag fundamentals: from furnace to Tundish’, Ironmak. Steelmak., 2002, 29, (2), 133–139. doi: 10.1179/030192302225003495
- E. B. Pretorius and R. C. Carlisle: ‘Foamy slag fundamentals and their practical application to electric furnace steelmaking’, Iron Steelmak. (USA), 1999, 26, (10), 79–88.
- C. Sedivy and R. Krump: ‘Tools for foaming slag operation at EAF steelmaking’, Arch. Metall. Mater., 2008, 53, (2), 405–409.
- H. Matsuura and R. J. Fruehan: ‘Slag Foaming in an electric arc furnace’, ISIJ Int., 2009, 49, (10), 1530–1535. doi: 10.2355/isijinternational.49.1530
- C. Marique, P. Nyssen and P. Salamone: ‘On-line control of the foamy slag in EAF.’ Proceedings of the 6th European Electric Steelmaking Conference, Dusseldurf, 1999.
- B. Vidacak, I. Arvanitidis, P. G. Jonsson and P. Sjoberg: ‘Observation on foaming of EAF slags in the production of stainless steel’, Scand. J. Metall., 2002, 31, (5), 321–327. doi: 10.1034/j.1600-0692.2002.10586.x
- J. Burchell, C. Aldrich, J. J. Eksteen, T. R. Niesler and G. T. Jemwa: ‘Acoustic monitoring of plasma arcs in direct current electric arc furnaces’, Metall. Mater. Trans. B, 2009, 40, (6), 886–891. doi: 10.1007/s11663-009-9287-2
- K. Krüger, A. Ehrbar and K. Timm: ‘Schlackenanbackungen und thermische Verluste eines Drehstromofens’, Stahl Eisen, 1998, 9, 63–70.
- F. Martell-Chávez, M. Ramírez-Argáez, A. Llamas-Terres and O. Micheloud-Vernackt: ‘Theoretical estimation of peak arc power to increase energy efficiency in electric arc furnaces’, ISIJ Int., 2013, 53, (5), 743–750. doi: 10.2355/isijinternational.53.743
- E. Trejo, F. Martell, O. Micheloud, L. Teng, A. Llamas and A. Montesinos-Castellanos: ‘A novel estimation of electrical and cooling losses in electric arc furnaces’, Energy, 2012, 42, (1), 446–456. doi: 10.1016/j.energy.2012.03.024
- T. J. E. Miller and C. Concordia: ‘Reactive power control in electric systems’, Vol. 2; 1982, New York, Wiley.
- D. S. Paulson: ‘Applied statistical designs for the researcher’, 2003, New York, CRC Press.