http://orcid.org/0000-0002-2966-1879
References
- Yamauchi A, Sorimachi K, Sakuraya T, et al. Heat transfer between mold and strand through mold flux film in continuous casting of steel. ISIJ Inter. 1993;33(1):140–147. doi: 10.2355/isijinternational.33.140
- Nakada H, Susa M, Seko Y, et al. Mechanism of heat transfer reduction by crystallization of mold flux for continuous casting. ISIJ Inter. 2008;48(4):446–453. doi: 10.2355/isijinternational.48.446
- Nishioka K, Maeda T, Shimizu M. Application of square-wave pulse heat method to thermal properties measurement of CaO-SiO2-Al2O3 system fluxes. ISIJ Inter. 2006;46(3):427–433. doi: 10.2355/isijinternational.46.427
- Andersson SP, Eggertson C. Thermal conductivity of powders used in continuous casting of steel. Part 1 – Glassy and crystalline slags. Ironmaking Steelmaking. 2015;42(6):456–464. doi: 10.1179/1743281214Y.0000000250
- Tsutsumi K, Nagasaka T, Hino M. Surface roughness of solidified mold flux in continuous casting process. ISIJ Inter. 1999;39(11):1150–1159. doi: 10.2355/isijinternational.39.1150
- Hanao M, Kawamoto M. Flux film in the mold of high speed continuous casting. ISIJ Inter. 2008;48(2):180–185. doi: 10.2355/isijinternational.48.180
- Holzhauser JF, Spitzer KH, Schwerdtfeger K. Laboratory study of heat transfer through thin layers of casting slag: minimization of the slag/probe contact resistance. Steel Res. 1999;70(10):430–436. doi: 10.1002/srin.199905662
- Bothma JA, Pistorius PC. Heat transfer through mould flux with titanium oxide additions. Ironmaking Steelmaking. 2007;34(6):513–520. doi: 10.1179/174328107X203912
- Machingawuta NC, Bagha S, Grieveson P. Heat transfer simulation for continuous casting. Steelmaking Conf Proc. 1991;74:163–170.
- Wen G, Sridhar S, Tang P, et al. Development of fluoride-free mold powders for peritectic steel slab casting. ISIJ inter. 2007;47(8):1117–1125. doi: 10.2355/isijinternational.47.1117
- Assis KLS, Pistorius PC. Cold-finger measurement of heat transfer through solidified mold flux layers in Advances in molten slags, fluxes, and salts: Proceedings of the 10th International Conference on molten slags, fluxes and salts; 2016 May 22–25. In: Ramana GR, Chaubal P, Pistorius PC, et al., editor. Seattle, WA, John Wiley & Sons, Inc; 2016. p. 307–315.
- Iida T, Sakai H, Kita Y, et al. Equation for estimating viscosities of industrial mold fluxes. High Temp Mater Processes. 2000;19(3-4):153–164. doi: 10.1515/HTMP.2000.19.3-4.153
- Holman JP. Heat transfer. London, McGraw-Hill, 1992.
- Assis KLS. Heat transfer through mold fluxes: a new approach to measure thermal properties of slags [dissertation]. Pittsburgh, PA, Carnegie Mellon University, 2016.