Microstructure and Vickers-hardness of 20CrMnTiH steel during hot compression testing

References

• Feng W, Hua L, Han XH. Finite element analysis and simulation for cold precision forging of a helical gear. J Cent South Univ. 2012;19:3369–3377. doi: 10.1007/s11771-012-1416-4
   Web of Science ®Google Scholar
• Feng W, Hua L. Multi-objective optimization of process parameters for the helical gear precision forging by using Taguchi method. J Mech Sci Technol. 2011;25:1519–1527. doi: 10.1007/s12206-011-0803-3
   Web of Science ®Google Scholar
• Liu YG, Li MQ, Luo J. The modelling of dynamic recrystallization in the isothermal compression of 300M steel. Mater Sci Eng A. 2013;574:1–8. doi: 10.1016/j.msea.2013.03.011
   Web of Science ®Google Scholar
• Feng W, Fu YH. High temperature deformation behavior and constitutive modeling for 20CrMnTiH steel. Mater Des. 2014;57:465–471. doi: 10.1016/j.matdes.2014.01.014
   Web of Science ®Google Scholar
• Chai RX, Su WB, Guo C, et al. Constitutive relationship and microstructure for 20CrMnTiH steel during warm deformation. Mater Sci Eng A. 2012;556:473–478. doi: 10.1016/j.msea.2012.07.015
   Web of Science ®Google Scholar
• Chai RX, Xu DH, Guo C. Prediction of constitutive behaviour of 20CrMnTiH steel under hot deformation conditions. Mater Sci Technol. 2012;28:857–863. doi: 10.1179/1743284712Y.0000000021
   Web of Science ®Google Scholar
• Wu ST, Feng W, Hu X. Constitutive modelling of flow behaviour of 20CrMnTiH steel. Ironmak Steelmak. 2015;42:481–488. doi: 10.1179/1743281214Y.0000000248
   Web of Science ®Google Scholar
• Li B, Zhang SH, Zhang HQ, et al. Microstructure and properties of copper tube during three-roll planetary rolling. J Mater Eng Perform. 2008;17:499–505. doi: 10.1007/s11665-007-9166-4
   Web of Science ®Google Scholar
• Huang F, Tao NR, Lu K. Effects of strain rate and deformation temperature on microstructures and hardness in plastically deformed pure aluminum. J Mater Sci Technol. 2011;27:1–7. doi: 10.1016/S1005-0302(11)60017-0
   Web of Science ®Google Scholar
• Yamanka K, Mori M, Kurosu S, et al. Ultrafine grain refinement of biomedical Co-29Cr-6Mo alloy during conventional hot-compression deformation. Metall Mater Trans A. 2009;40A:1980–1994. doi: 10.1007/s11661-009-9879-0
   Web of Science ®Google Scholar
• Li Q. Modeling the microstructure–mechanical property relationship for a 12Cr–2W–V–Mo–Ni power plant steel. Mater Sci Eng A. 2003;361:385–391. doi: 10.1016/S0921-5093(03)00565-3
   Web of Science ®Google Scholar
• Liu R, Salahshoor M, Melkote SN, et al. The prediction of machined surface hardness using a new physics-based material model. Proc CIRP. 2014;13:249–256. doi: 10.1016/j.procir.2014.04.043
   Google Scholar
• Cheng XZ, Huang YM, Lei YC. Microstructure and properties of 700Mpa grade HSLA steel during high temperature deformation. J Alloys Comp. 2015;631:225–231. doi: 10.1016/j.jallcom.2015.01.093
   Web of Science ®Google Scholar
• Zener C, Hollomon JH. Effect of strain rate upon plastic flow of steel. J App Phys. 1944;15:22–32. doi: 10.1063/1.1707363
   Google Scholar
• Cai GY, Huang XT, Qu S. Effect of hot compression process on recrystallization microstructure and mechanical properties of AZ31 magnesium alloy. Phys Proc. 2013;50:61–67. doi: 10.1016/j.phpro.2013.11.012
   Google Scholar
• Yang ZY, Zhang FC, Zheng CL, et al. Study on hot deformation behaviour and processing maps of low carbon bainitic steel. Mater Design. 2015;66:258–266. doi: 10.1016/j.matdes.2014.10.068
   Web of Science ®Google Scholar
• Li XW, Sun HF, Zhang P, et al. The effect of strain on dynamic recrystallization of PM Ti–45Al–10Nb intermetallics during isothermal forging. Intermetallics. 2014;55:90–94. doi: 10.1016/j.intermet.2014.07.014
   Web of Science ®Google Scholar
• Shulkla R, Ghosh SK, Chakrabarti D, et al. Microstructure, texture, property relationship in thermo-mechanically processed ultra-low carbon microalloyed steel for pipeline application. Mater Sci Eng A. 2013;587:201–208. doi: 10.1016/j.msea.2013.08.054
   Web of Science ®Google Scholar
• Gazder AA, Sánchez-Araiza M, Jonas JJ, et al. Evolution of recrystallization texture in a 0.78wt.% Cr extra-low-carbon steel after warm and cold rolling. Acta Mater. 2011;59:4847–4865. doi: 10.1016/j.actamat.2011.04.027
   Web of Science ®Google Scholar
• Mao WM, Zhao XB. Metal recrystallization and grain growth. China: Metallurgical industry Press; 1994. 205–207.
   Google Scholar
• Busby JT, Harsh MC, Was GS. The relationship between hardness and yield stress in irradiated austenitic and ferritic steels. J Nucl Mater. 2005;336:267–278. doi: 10.1016/j.jnucmat.2004.09.024
   Web of Science ®Google Scholar
• Hughes GD, Smith SD, Pande CS, et al. Hall-petch strengthening for the microhardness of twelve nanometer grain diameter electrodeposited nickel. Scr Metall. 1986;20:93–97. doi: 10.1016/0036-9748(86)90219-X
   Google Scholar