References
- Turkdogan ET. Fundamentals of steelmaking. Leeds: Maney Materials Science; 2010.
- Manson SS, Halford GR. Fatigue and durability of metals at high temperatures. Materials Park: ASM International; 2009.
- Hurd D, Kollar J. Direct current electric arc furnaces. Pittsburgh: EPRI Centre for Material Production; 1991.
- Jones J. Understanding electric arc furnaces operations. Pittsburgh: EPRI Centre for Material Production; 1997.
- Kaplun MY. Bottom electrodes of DC electric arc furnaces. Russian Metall. 2009;7:618–621. doi: 10.1134/S0036029509070155
- AISE Steel Foundation. The making, shaping and treating of steel, 11th edition steelmaking and refining volume, 1998.
- Kazak O, Semko O. Modelling of electrovortex and heat flows in dc arc furnaces with bottom electrode. Ironmak Steelmak. 2013;40(8):619–624. doi: 10.1179/1743281212Y.0000000081
- Wang F, Jin Z, Zhu Z. Numerical study of dc arc plasma and molten bath in dc electric arc furnace. Ironmak Steelmak. 2006;33(1):39–44. doi: 10.1179/174328105X71326
- Benasciutti D, De Bona F, Moro L, et al. Analisi termomeccanica di un elettrodo per forno ad arco elettrico. Proceedings of the 40th AIAS Conference, Palermo (ITA), 2011 Sep.
- Ansoldi M, Benasciutti D, De Bona F, et al. Thermo-mechanical analysis of an electrode for direct current arc furnace. Proceedings of 9th AMST Conference, Mali Losinj (CRO), 2011 Jun.
- Purkiss JA. Fire safety engineering. 2nd ed. Oxford: Elsevier; 2007.
- Mills KC. Recommended values of thermophysical properties for selected commercial alloys. Cambridge: ASM International; 2002.
- Koric S, Thomas BG. Thermo-mechanical models of steel solidification based on two elastic visco-plastic constitutive laws. J Mater Process Technol. 2008;197:408–418. doi: 10.1016/j.jmatprotec.2007.06.060
- You JH, Miskiewicz M. Material parameters of copper and CuCrZr alloy for cyclic plasticity at elevated temperatures. J Nucl Mater. 2008;373:269–274. doi: 10.1016/j.jnucmat.2007.06.005
- Wang YC. Steel and composite structures: behaviour and design for fire safety. London: Spoon Press; 2002.
- Hatanaka K, Yamada T. Low cycle fatigue strength of copper and α-brass cold-worked. Bull JSME. 1981;24:613–620. doi: 10.1299/jsme1958.24.613
- Agostinetti P, Dalla Palma M, Dal Bello S, et al. Investigation of the thermomechanical properties of electro-deposited copper for ITER. J Nucl Mater. 2011;417:924–927. doi: 10.1016/j.jnucmat.2011.01.084
- Chaboche JL, Cailletaud G. On the calculation of structures in cyclic plasticity or viscoplasticity. Comp Struct. 1986;23(1):23–31. doi: 10.1016/0045-7949(86)90103-3
- Collin J-M, Parenteau T, Mauvoisin G, et al. Material parameters identification using experimental continuous spherical indentation for cyclic hardening. Comp Mater Sci. 2009;46:333–338. doi: 10.1016/j.commatsci.2009.03.016
- Li G, Thomas BG, Stubbins JF. Modeling creep and fatigue of copper alloys. Metall Mater Trans A. 2000;31A(10):2491–2502. doi: 10.1007/s11661-000-0194-z
- Chen WF, Han DJ. Plasticity for structural engineers. New York (NY): Springer-Verlag; 1988.
- Park JK, Thomas BG, Samarasekera IV, et al. Thermal and mechanical behavior of copper molds during thin-slab casting (II): mold crack formation. Metall Mater Trans. 2002;33(B):437–449. doi: 10.1007/s11663-002-0055-9
- Thomas BG, Li G, Moitra A, et al. Analysis of thermal and mechanical behavior of copper molds during continuous casting of steel slabs. Proceedings of 80th Steelmaking Conference, Chicago (IL), 1997 Apr.
- Horsky J, Raudensky M, Luks T. Thermal load and fatigue of rolls in hot rolling. In: AISTech 2012 Iron and Steel Technology Conference and Exposition, Atlanta, GA, 2012 May.
- Benasciutti D, De Bona F, Munteanu MG. A harmonic one-dimensional element for non-linear thermo-mechanical analysis of axisymmetric structures under asymmetric loads: the case of hot strip rolling. J Strain Anal. 2016;51(7):518–531. doi: 10.1177/0309324716658415
- Yoshida F, Urabe M. Computer-aided process design for the tension levelling of metallic strips. J Mater Process Technol. 1999;89–90:218–223. doi: 10.1016/S0924-0136(99)00034-5
- Wang Z. Low-cycle-fatigue behavior of copper materials and their use in synchrotron beamline components. Nucl Instrum Meth Phys Res. 1994;347(1–3):651–656. doi: 10.1016/0168-9002(94)91965-8
- Freudenberger J, Klauß H-J, Heinze K, et al. Fatigue of highly strengthened Cu–Ag alloys. Int J Fatigue. 2008;30:437–443. doi: 10.1016/j.ijfatigue.2007.04.009
- Manson SS. Thermal stress and low-cycle fatigue. New York: McGraw-Hill; 1966.
- Liu KC, Loring CM. Low cycle fatigue behaviour of oxygen-free high conductivity copper at 300°C in high vacuum. J. Nucl. Mater. 1984;122–123:783–788. doi: 10.1016/0022-3115(84)90699-8
- O’Connor TG, Dantzig JA. Modeling the thin-slab continuous-casting mold. Metall Mater Trans B. 1994;25B:443–457. doi: 10.1007/BF02663395
- Manson SS, Halford GR. Fatigue and durability of structural materials. Materials Park: ASM International; 2006.