References
- Bhadeshia HKDH. Bainite in steels. London: IOM Communications Ltd;2001: 285.
- Kojima A, Yoshii K, Hada T, et al. Development of high HAZ toughness steel plates for box columns with high heat input welding. Nippon Steel Tech Rep. 2004;90:39–44.
- Ogibayashi S. Advances in technology of oxide metallurgy. Nippon Steel Tech Rep. 1994;61:70–76.
- Zheng W, Wu ZH, Li GQ, et al. Effect of Al content on the characteristics of inclusions in Al-Ti complex deoxidized steel with calcium treatment. ISIJ Int. 2014;54(8):1755–1764. doi: 10.2355/isijinternational.54.1755
- Lee JL, Pan YT. Microstructure and toughness of the simulated heat-affected zone in Ti-and Al-killed steels. Mater Sci Eng A. 1991;136:109–119. doi: 10.1016/0921-5093(91)90446-T
- Kojima A, Kiyose A, Uemori R, et al. Super high HAZ toughness technology with fine microstructure imparted by fine particles. Nippon Steel Tech Rep. 2004;90:292–295.
- Sakata K, Suito H. Grain-growth-inhibiting effects of primary inclusion particles of ZrO2 and MgO in Fe-10 mass pct Ni alloy. Metall Mater Trans A. 2000;31(4):1213–1223. doi: 10.1007/s11661-000-0117-z
- Chai F, Yang CF, Su H, et al. Effect of Zr addition to Ti-killed steel on inclusion formation and microstructural evolution in welding induced coarse-grained heat affected zone. Acta Metall Sin. 2008;21(3):220–226. doi: 10.1016/S1006-7191(08)60042-3
- Guo AM, Li SR, Guo J, et al. Effect of zirconium addition on the impact toughness of the heat affected zone in a high strength low alloy pipeline steel. Mater Character. 2008;59(2):134–139. doi: 10.1016/j.matchar.2006.11.028
- Zhang L, Yuan ZX, Song SH, et al. Austenite grain growth in heat affected zone of Zr-Ti bearing microalloyed steel. J Iron Steel Res Int. 2012;19(2):73–78. doi: 10.1016/S1006-706X(12)60063-6
- Wang C, Misra RDK, Shi MH, et al. Transformation behavior of a Ti-Zr deoxidized steel: microstructure and toughness of simulated coarse grain heat affected zone. Mater Sci Eng A. 2014;594:218–228. doi: 10.1016/j.msea.2013.11.028
- Shi M, Zhang P, Zhu F. Toughness and microstructure of coarse grain heat affected zone with high heat input welding in Zr-bearing low carbon steel. ISIJ Int. 2014;54(1):188–192. doi: 10.2355/isijinternational.54.188
- Nako H, Okazaki Y, Speer JG. Acicular ferrite formation on Ti-rare earth metal-Zr complex oxides. ISIJ Int. 2015;55(1):250–256. doi: 10.2355/isijinternational.55.250
- Zhou B, Li G, Wan X, et al. In-situ observation of grain refinement in the simulated heat-affected zone of high-strength low-alloy steel by Zr-Ti combined deoxidation. Met Mater Int. 2016;22(2):267–275. doi: 10.1007/s12540-016-5301-9
- Wan XL, Wu KM, Huang G, et al. Toughness improvement by Cu addition in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels. Sci Technol Welding Joining. 2016;21(4):295–302. doi: 10.1080/13621718.2015.1104098
- Huang G, Wan XL, Wu KM. Effect of Cr content on microstructure and impact toughness in the simulated coarse-grained heat-affected zone of high-strength low-alloy steels. Steel Res Int. 2016;87(11):1426–1434. doi: 10.1002/srin.201500424
- Wang HR, Wang W, Gao JQ. Precipitates in two Zr-bearing HSLA steel plates. Mater Lett. 2010;64(2):219–222. doi: 10.1016/j.matlet.2009.10.053
- Hino M, Ito K. Thermodynamic data for steelmaking. Sendai: Tohoku University Press;2010.
- Wan X, Wu K, Huang G, et al. In situ observation of austenite grain growth behavior in the simulated coarse-grained heat-affected zone of Ti-microalloyed steels. Int J Miner Metal Mater. 2014;21(9):878–885. doi: 10.1007/s12613-014-0984-8
- Mabuchi H, Uemori R, Fujioka M. The role of Mn depletion in intra-granular ferrite transformation in the heat affected zone of welded joints with large heat input in structural steels. ISIJ Int. 1996;36(11):1406–1412. doi: 10.2355/isijinternational.36.1406
- Zhang S, Hattori N, Enomoto M, et al. Ferrite nucleation at ceramic/austenite interfaces. ISIJ Int. 1996;36(10):1301–1309. doi: 10.2355/isijinternational.36.1301
- Ricks RA, Howell PR, Barritte GS. The nature of acicular ferrite in HSLA steel weld metals. J Mater Sci. 1982;17(13):732–740. doi: 10.1007/BF00540369
- Shim JH, Byun JS, Cho YW, et al. Mn absorption characteristics of Ti2O3 inclusions in low carbon steels. Scr Mater. 2001;44(1):49–54. doi: 10.1016/S1359-6462(00)00560-1
- Shigesato G, Sugiyama M. Development of in situ observation technique using scanning ion microscopy and demonstration of Mn depletion effect on intra-granular ferrite transformation in low-alloy steel. J Electron Microsc. 2002;51(6):359–367. doi: 10.1093/jmicro/51.6.359
- Wan XL, Wang HH, Cheng L, et al. The formation mechanisms of interlocked microstructures in low-carbon high-strength steel weld metals. Mater Charact. 2012;67:41–51. doi: 10.1016/j.matchar.2012.02.007
- Li Y, Wan XL, Cheng L, et al. First-principles calculation of the interaction of Mn with ZrO2 and its effect on the formation of ferrite in high-strength low-alloy steels. Scr Mater.2014 ;75:78–81. doi: 10.1016/j.scriptamat.2013.11.028