References
- Mills KC, Fox AB. The role of mould fluxes in continuous casting-so simple yet so complex. ISIJ Int. 2003;43:1479–1486. doi: 10.2355/isijinternational.43.1479
- Nakato H, Ozawa M, Kinoshita K, et al. Factors affecting the formation of shell and longitudinal cracks in mold during high speed continuous casting of slabs. Trans ISIJ. 1984;24:957–965. doi: 10.2355/isijinternational1966.24.957
- Hanao M. Influence of basicity of mold flux on its crystallization rate. ISIJ Int. 2013;53:648–654. doi: 10.2355/isijinternational.53.648
- Mizuno H, Esaka H, Shinozuka K, et al. Analysis of the crystallization of mold flux for continuous casting of steel. ISIJ Int. 2008;48:277–285. doi: 10.2355/isijinternational.48.277
- Yamauchi A, Sorimachi K, Yamauchi T. Effect of solidus temperature and crystalline phase of mould flux on heat transfer in continuous casting mould. Ironmak Steelmak. 2002;29:203–207. doi: 10.1179/030192302225004179
- Kashiwaya Y, Cicutti CE, Cramb AW. An investigation of the crystallization of a continuous casting mold slag using the single hot thermocouple technique. ISIJ Int. 1998;38:357–365. doi: 10.2355/isijinternational.38.357
- Kashiwaya Y, Nakauchi T, Pham KS, et al. Crystallization behaviors concerned with TTT and CCT diagrams of blast furnace slag using hot thermocouple technique. ISIJ Int. 2007;47:44–52. doi: 10.2355/isijinternational.47.44
- Lu B, Chen K, Wang W, et al. Effects of Li2O and Na2O on the crystallization behavior of lime-alumina-based mold flux for casting high-Al steels. Metall Mater Trans B. 2014;45:1496–1509. doi: 10.1007/s11663-014-0063-6
- Zaitsev AI, Leites AV, Lrtvina AD, et al. Investigation of the mould powder volatiles during continuous casting. Steel Res. 1994;65:368–374. doi: 10.1002/srin.199401179
- Chilov A. Mass spectrometric study of volatile components in mould powders. Helsinki (HEL): Helsinki University of Technology; 2005.
- Heimbach H, Schulz K, Markardt J, et al. Release of fluorine compounds from casting slags. Stahl Eisen. 1997;117:105–110.
- Shinmei M, Machida T. Vaporization of AlF3 from the slag CaF2−Al2O3. Metall Trans. 1973;4:1996–1997. doi: 10.1007/BF02665432
- Shimizu K, Suzuki T, Jimbo I, et al. An investigation on the vaporization of fluorides from slag melts. Ironmak Conf Proc. 1996;55:727–733.
- Watanabe T, Kakizaki M, Hayashi M. Effect of alkali oxide on cuspidine crystallization for CaO-SiO2-CaF2-R2O (R=Li, Na, K) slag. Proceedings of the 6th international congress on the science and technology of steelmaking; 2015 May 12–14; Beijing. Beijing: China Machine Press; 2015. p. 596–600.
- Lu B, Wang W. Effects of fluorine and BaO on the crystallization behavior of lime-alumina-based mold flux for casting high-Al steels. Metall Mater Trans B. 2015;46:852–862. doi: 10.1007/s11663-014-0285-7
- Wobrauschek P. Total reflection X-ray fluorescence analysis – a review. X-ray Spectrom. 2007;36:289–300. doi: 10.1002/xrs.985
- Shackley MS. X-ray fluorescence spectrometry (XRF) in geoarchaeology. New York (NY): Springer New York, 2011. p. 163.
- Zhang C, Zhu Z. Application of hot thermocouple technique for study on melting properties of mould powder. Contin Cast. 2005;03:36–38.
- Yang J, Cui Y, Wang L, et al. In-situ study of crystallization behavior of a mold flux using single and double hot thermocouple technique. Steel Res Int. 2015;86:636–643. doi: 10.1002/srin.201400346
- Wei J, Wang W, Zhou L, et al. Effect of Na2O and B2O3 on the crystallization behavior of low fluorine mold fluxes for casting medium carbon steels. Metall Mater Trans B. 2014;45:643–652. doi: 10.1007/s11663-013-9957-y