References
- Zhang L, Rietow B, Thomas BG, et al. Large inclusions in plain-carbon steel ingots cast by bottom teeming. ISIJ Int. 2006;46:670–679. doi: 10.2355/isijinternational.46.670
- Eriksson R, Jönsson L, Jönsson PG. Effect of entrance nozzle design on the fluid flow in an ingot. ISIJ Int. 2004;44:1358–1365. doi: 10.2355/isijinternational.44.1358
- Hallgren L, Takagi S, Eriksson R, et al. Effect of nozzle swirl blade on flow pattern in runner during uphill teeming. ISIJ Int. 2006;46: 1645–1651. doi: 10.2355/isijinternational.46.1645
- Hallgren L, Tilliander A, Yokoya S, et al. A first attempt to implement a swirl blade in production of ingots. ISIJ Int. 2010;50:1763–1769. doi: 10.2355/isijinternational.50.1763
- Tan Z, Ersson M, Jönsson PG. Modeling of initial mold filling with utilization of swirl blades. ISIJ Int. 2012;52:1066–1071. doi: 10.2355/isijinternational.52.1066
- Tan Z, Ersson M, Lidegran P, et al. Uphill teeming utilizing TurboSwirl to control flow pattern in mold. Steel Res. 2013;84:837–844. doi: 10.1002/srin.201200263
- Zhang T, Yuan S, Liu Y, et al. Experimental research on argon bubbling refining at mold bottom. Steelmaking. 1987;4:74–80. [ Chinese].
- Shi Y. Argon bubbling through a metal nozzle at the ingot mold bottom. Iron Steel. 1986;3:75. [ Chinese].
- Wang D, Shong W, Li P. Large ingot casting of 0Cr18Ni9Ti stainless steel forgings for nuclear power station. Heavy Cast Forg. 1992;4:37–39. [ Chinese].
- Hirt CW, Nichols BD. Volume of fluid (VOF) method for the dynamics of free boundaries. J Comput Phys. 1981;39(1):201–225. doi: 10.1016/0021-9991(81)90145-5
- Launder BE, Spalding DB. Lectures in mathematical models of turbulence. . London: Academic Press; 1972.
- Launder BE, Spalding DB. The numerical computation of turbulent flows. Comput Methods Appl Mech Eng. 1974;3:269–289. doi: 10.1016/0045-7825(74)90029-2
- Ansys 14.0 Manual, ANSYS, Inc., USA, 2011.
- Drew DA, Lahey RT. In particulate two-phase flow, 509-566. Boston (MA): Butterworth- Heinemann; 1993.
- Eriksson R, Jönsson P, Gustafsson A. Determination of inclusion characteristics in ‘low-carbon’ steel during up-hill teeming. Scan J Metall. 2004;33:160–171. doi: 10.1111/j.1600-0692.2004.00680.x
- Ragnarsson L, Ek M, Eliasson A, et al. Flow pattern in ingot during mould filling and its impact on inclusion removal. Ironmak Steelmak. 2010;37:347–352. doi: 10.1179/030192310X12683045806062