References
- Ludlow V, Normanton A, Anderson A, et al. Strategy to minimize central segregation in high carbon steel grades during billet casting. Ironmak Steelmak. 2005;32(1):68–74. doi: 10.1179/174328105X23978
- Sun H, Li L, Cheng X, et al. Reduction in macro segregation on 380 mm×490 mm bloom caster equipped combination M + FEMS by optimizing casting speed. Ironmak Steelmak. 2015;42(6):439–449. doi: 10.1179/1743281214Y.0000000247
- Yu H, Zhu M. Influence of electromagnetic stirring on transport phenomena in round billet continuous casting mould and macrostructure of high carbon steel billet. Ironmak Steelmak. 2013;39(8):574–584. doi: 10.1179/0301923312Z.00000000058
- An H, Bao Y, Wang M, et al. Effects of electromagnetic stirring on fluid flow and temperature distribution in billet continuous casting mould and solidification structure of 55SiCr. Metall Res Technol. 2018;115(103):1–12.
- Bode O, Schwerdtfeger K, Geck HG. Influence of casting parameters on void volume and center segregation in continuously cast 100Cr6 blooms. Ironmak Steelmak. 2008;35(2):137–145. doi: 10.1179/030192307X233511
- Du W, Wang K, Song C, et al. Effect of special combined electromagnetic stirring mode on macro segregation of high strength spring steel blooms. Ironmak Steelmak. 2008;35(2):153–156. doi: 10.1179/030192307X239533
- Wang B, Chen W, Chen Y, et al. Coupled numerical simulation on electromagnetic field and flow field in the round billet mold with electromagnetic stirring. Ironmak Steelmak. 2015;42(1):63–64. doi: 10.1179/1743281214Y.0000000201
- Bridge M, Rogers G. Structural effects and band segregate formation during the electromagnetic stirring of strand-cast steel. Metal Trans B. 1984;15(3):581–589. doi: 10.1007/BF02657390
- Pardeshi R, Singh A, Dutta P. Modeling of solidification process in a rotary electromagnetic stirrer. Numer Heat Transf. 2008;55(1):42–57. doi: 10.1080/10407780802553961
- Mao B, Tao J, Jiang T. A few important problems of electromagnetic stirring for continuous casting of billet. Steelmaking. 2008;24(4):16–20.
- Trindade L, Nadalon J, Contini A, et al. Modeling of solidification in continuous casting round billet with mold electromagnetic stirring. Steel Research int. 2017;88(4):1–8. doi: 10.1002/srin.201600319
- Raj M, Pandey J. Optimisation of electromagnetic stirring in continuously cast steel billets using ultrasonic C-scan imaging technique. Ironmak Steelmak. 2008;35(4):288–296. doi: 10.1179/174328108X293462
- Choudhary S, Suvankar G. Morphology and segregation in continuously cast high carbon steel billets. ISIJ Int. 2009;49(4):521–528. doi: 10.2355/isijinternational.49.521
- Sahoo PP, Kumar A, Halder J, et al. Optimization of electromagnetic stirring in steel billet caster by using image processing technique for improvement in billet quality. ISIJ Int. 2009;47(12):1759–1766.
- Geng X, Li X, Liu F, et al. Optimisation of electromagnetic field and flow field in round billet continuous casting mould with electromagnetic stirring. Ironmak Steelmak. 2015;42(9):675–682. doi: 10.1179/1743281215Y.0000000015
- Wu H, Wei N, Bao Y, et al. Effect of M-EMS on the solidification structure of a steel billet. Int J miner. Metall Mater. 2011;18(2):159–164.