References
- You-ping MA, Xiu-lan LI, Cheng-hui WANG, et al. Microstructure and impact wear resistance of TiN reinforced high manganese steel matrix. Wear. 2012;19(7):60–65.
- Ivanov Y, Gromov V, Konovalov S, et al. Structure and properties of strengthening layer on Hardox 450 steel. Mater Sci Technol. 2017;33(2):1–8.
- Perez M, Sidoroff C, Vincent A, et al. Microstructural evolution of martensitic 100Cr6 bearing steel during tempering: from thermoelectric power measurements to the prediction of dimensional changes. Acta Mater. 2009;57(11):3170–3181. doi: 10.1016/j.actamat.2009.03.024
- Caballero FG, Bhadeshia HKDH, Mawella KJA, et al. Very strong low temperature bainite. Mater Sci Technol. 2013;18(3):279–284. doi: 10.1179/026708301225000725
- He J, Zhao A, Zhi C, et al. Acceleration of nanobainite transformation by multi-step ausforming process. Scr Mater. 2015;107:71–74. doi: 10.1016/j.scriptamat.2015.05.023
- Zhao J, Guo K, He YM, et al. Extremely high strength achievement in medium-C nanobainite steel. Scr Mater. 2018;152:20–23. doi: 10.1016/j.scriptamat.2018.04.005
- Guo H, Feng X, Zhao A, et al. Influence of prior martensite on bainite transformation, microstructures, and mechanical properties in ultra-fine bainitic steel. Materials (Basel). 2019;12(3):527. doi: 10.3390/ma12030527
- Kumar A, Singh A. Toughness dependence of nano-bainite on phase fraction and morphology. Mater Sci Eng A. 2018;729:439–443. doi: 10.1016/j.msea.2018.05.106
- Yoozbashi MN, Yazdani S, Wang TS. Design of a new nanostructured, high-Si bainitic steel with lower cost production. Mater Des. 2011;32(6):3248–3253. doi: 10.1016/j.matdes.2011.02.031
- Xiaohui L, Dongsheng Q, Wei L, et al. Enhanced toughness of bearing steel by combining prior cold deformation with martensite pre-quenching and bainite transformation. Mater Lett. 2019;234:5–8. doi: 10.1016/j.matlet.2018.09.017
- Efremenko VG, Hesse O, Friedrich T, et al. Two-body abrasion resistance of high-carbon high-silicon steel: metastable austenite vs nanostructured bainite. Wear. 2019;418–419:24–35. doi: 10.1016/j.wear.2018.11.003
- Two-body abrasion wear mechanism of super bainitic steel.
- Shah M, Das Bakshi S. Three-body abrasive wear of carbide-free bainite, martensite and bainite-martensite structure of similar hardness. Wear. 2018;402–403:207–215. doi: 10.1016/j.wear.2018.02.020
- Das Bakshi S, Shipway PH, Bhadeshia HKDH. Three-body abrasive wear of fine pearlite, nanostructured bainite and martensite. Wear. 2013;308(1–2):46–53. doi: 10.1016/j.wear.2013.09.008
- Hasan SM, Chakrabarti D, Singh SB. Dry rolling/sliding wear behaviour of pearlitic rail and newly developed carbide-free bainitic rail steels. Wear. 2018;408–409:151–159. doi: 10.1016/j.wear.2018.05.006
- Bakshi SD, Leiro A, Prakash B, et al. Dry rolling/sliding wear of nanostructured bainite. Wear. 2014;316(1–2):70–78. doi: 10.1016/j.wear.2014.04.020
- Rementeria R, García I, Aranda MM, et al. Reciprocating-sliding wear behavior of nanostructured and ultra-fine high-silicon bainitic steels. Wear. 2015;338–339:202–209. doi: 10.1016/j.wear.2015.06.011
- Kumar A, Makineni SK, Dutta A, et al. Design of high-strength and damage-resistant carbide-free fine bainitic steels for railway crossing applications. Mater Sci Eng A. 2019;759:210–223. doi: 10.1016/j.msea.2019.05.043
- Solano-Alvarez W, Pickering EJ, Bhadeshia HKDH. Degradation of nanostructured bainitic steel under rolling contact fatigue. Mater Sci Eng A. 2014;617:156–164. doi: 10.1016/j.msea.2014.08.071
- Long XY, Zhang FC, Kang J, et al. Study on carbide-bearing and carbide-free bainitic steels and their wear resistance. Met Sci J. 2016;33(5):615–622.
- Wang Y, Yang Z, Zhang F, et al. Microstructures and mechanical properties of surface and center of carburizing 23Cr2Ni2Si1Mo steel subjected to low-temperature austempering. Mater Sci Eng A. 2016;670:166–177. doi: 10.1016/j.msea.2016.05.084
- Kozeschnik E, Bhadeshia HKDH. Influence of silicon on cementite precipitation in steels. Met Sci J. 2008;24(3):343–347.
- Chang LC, Bhadeshia HKDH. Austenite films in bainitic microstructures. Met Sci J. 1995;11(9):874–882.
- Singh K, Singh A. Tribological response and microstructural evolution of nanostructured bainitic steel under repeated frictional sliding. Wear. 2018;410-411:63–71. doi: 10.1016/j.wear.2018.06.005
- De AK, Murdock DC, Mataya MC, et al. Quantitative measurement of deformation-induced martensite in 304 stainless steel by X-ray diffraction. Scr Mater. 2004;50(12):1445–1449. doi: 10.1016/j.scriptamat.2004.03.011
- Moghaddam PV, Hardell J, Vuorinen E, et al. The role of retained austenite in dry rolling/sliding wear of nanostructured carbide-free bainitic steels. Wear. 2019;428-429:193–204. doi: 10.1016/j.wear.2019.03.012