References
- Kim KH, Park SD, Kim JH, et al. Role of spheroidized carbides on the fatigue life of bearing steel. Met Mater Int. 2012;18(6):917–921.
- Han H, Zhao X, Wan C, et al. Effect of proeutectoid carbide on heredity in microstructure-mechanical properties and fatigue life of GCr15 bearing steel. Metall Res Technol. 2017;114(2):1–12.
- Guan J, Wang LQ, Zhang ZQ, et al. Fatigue crack nucleation and propagation at clustered metallic carbides in M50 bearing steel. Tribol Int. 2018;119:165–174.
- Ayata K, Mor T, Fujmoto T, et al. Low superheat teeming with electromagnetic stirring. ISIJ Int. 1995;35(6):680–685.
- Ludlow V, Normanton A, Anderson A. Strategy to minimize central segregation in high carbon steel grades during billet casting. Ironmaking Steelmaking. 2005;32(1):68–74.
- Ayata K, Mori T, Fujimoto T, et al. Improvement of macrosegregation in continuously cast bloom and billet by electromagnetic stirring. Trans ISIJ. 1984;24(11):931–939.
- Wang Q, Yan H, Wang F, et al. Impact of electromagnetic stirring on grain structure of electroslag remelting ingot. JOM. 2015;67(8):1821–1829.
- Hunt JD. Steady state columnar and equiaxed growth of dendrites and eutectic. Mater Sci Eng. 1984;65(1):75–83.
- Niu S, Senk D, Rezende JLL. Numerical modeling of the effect of mechanical vibration on 10 kg C45 steel Ingot solidification. Steel Res Int. 2019;90(8):1–12.
- Niu L, Qiu ST, Zhao JX, et al. Processing parameter optimization for continuous casting of 38CrMoAl round bloom based on a prediction model of the equiaxed crystal ratio. Ironmak Steelmak. 2018. doi: 10.1080/03019233.2018.1518807
- Gao XZ, Yang SF, Li JS. Effects of micro-alloying elements and continuous casting parameters on reducing segregation in continuously cast slab. Mater Des. 2016;110:284–295.
- Wang W, Ji C, Luo S, et al. Modeling of dendritic evolution of continuously cast steel billet with cellular automaton. Metall Mater Trans B. 2017;49(1):200–212.
- Jing CL, Wang XH, Jiang M. Study on solidification structure of wheel steel round billet using FE-CA coupling model. Steel Res Int. 2011;82(10):1173–1178.
- An H, Bao Y, Wang M, et al. Effects of electromagnetic stirring on fluid flow and temperature distribution in billet continuous casting mould and solidification structure of 55SiCr. Metall Res Technol. 2018;115(1):1–12.
- Straffelini G, Lutterotti L, Tonolli M, et al. Modeling solidification microstructures of steel round billets obtained by continuous casting. ISIJ Int. 2011;51(9):1448–1453.
- Fang Q, Ni H, Zhang H, et al. Numerical study on solidification behavior and structure of continuously cast u71Mn steel. Metals. 2017;7(11):1–13.
- Gao X, Yang S, Li J, et al. Numerical simulation on optimization of center segregation for 50CrMo structural alloy steel. High Temp Mater Process. 2016;35(6):583–589.
- An H, Bao Y, Wang M, et al. Improvement of centre segregation in continuous casting bloom and the resulting carbide homogeneity in bearing steel GCr15. Ironmak Steelmak. 2019. doi: 10.1080/03019233.2019.1604614
- An H, Bao Y, Wang M, et al. Electromagnetic torque detecting for optimization of in-mould electromagnetic stirring in the billet and bloom continuous casting. Ironmak Steelmak. 2018. doi: 10.1080/03019233.2018.1522755
- Sun H, Li L, Cheng X, et al. Reduction in macro segregation on 380 mm×490 mm bloom caster equipped combination M + FEMS by optimizing casting speed. Ironmak Steelmak. 2015;42(6):439–449.
- Mintz B. The influence of composition on the hot ductility of steels and to the problem of transverse cracking. ISIJ Int. 1999;39(9):833–855.
- Choudhary KS, Ganguly S. Morphology and segregation in continuously cast high carbon steel billets. ISIJ Int. 2007;47(12):1759–1766.
- Yamazaki M, Natsume Y, Harada H, et al. Numerical simulation of solidification structure formation during continuous casting in Fe-0.7 Mass% C alloy using cellular automaton method. ISIJ Int. 2006;46(6):903–908.