References
- Raghukumar C, Kumar Tripathy S, Mohanan S. Beneficiation of Indian high alumina iron ore fines – a case study. Int J Mining Eng Miner Process. 2012;1(2):94–100. doi:10.5923/j.mining.20120102.11.
- Mahiuddin S, Bondyopadhway S, Baruah JN. A study on the beneficiation of Indian iron ore fines and slime using chemical additives. Int J Miner Process. 1989;26:285–296. https://doi.org/10.1016/0301-7516(89)90034-3.
- Hanumantha Rao K, Narasimhan KS. Selective flocculation applied to Barsuan iron ore tailings. Int J Miner Process. 1985;14:67–75. https://doi.org/10.1016/0301-7516(85)90015-8.
- Gujraj B, Sharma JP, Baldawa A, et al. Dispersion–flocculation studies on hematite-clay systems. Int J Miner Process. 1983;11:285–302. https://doi.org/10.1016/0301-7516(83)90050-9.
- Das B, Prakash S, Mohapatra BK, et al. Beneficiation of iron ore slimes using hydrocyclone. Miner Metall Process. 1992;9(2):101–103. https://doi.org/10.1007/BF03402979.
- Mohanty S, Das B. Optimization studies of hydrocyclone for beneficiation of iron ore slimes. Miner Process Extr Metall Rev. 2010;31(2):86–96. https://doi.org/10.1080/08827500903397142.
- Das B, Mohapatra BK, Reddy PSR, et al. Characterisation and beneficiation of iron ore slimes for further processing. Powder Handling Process. 1995;7(1):41–44.
- Park JH, Kim H, Min DJ. Novel approach to link between viscosity and structure of silicate melts via Darken’s excess stability function: focus on the amphoteric behavior of alumina. Metall Mater Trans B. 2008;39(1):150–153. https://doi.org/10.1007/s11663-007-9122-6.
- Shankar A. Sulphur partition between hot metal and high alumina blast furnace slag. Ironmak Steelmak. 2006;33(5):413–418. https://doi.org/10.1179/174328106X113968.
- Iida T, Sakai H, Kita Y, et al. An equation for accurate prediction of the viscosities of blast furnace type slags from chemical composition. ISIJ Int. 2000;40:S110–S114. https://doi.org/10.2355/isijinternational.40.Suppl_S110.
- Iida T, Kita Y. Rep ISIJ Meet. 2002;15:203.
- Urbain G. Viscosity estimation of slags. Steel Res. 1987;58:111–116. https://doi.org/10.1002/srin.198701513.
- Mills KC, Sridhar S. Viscosities of ironmaking and steelmaking slags. Ironmak Steelmak. 1999;26:262–268. https://doi.org/10.1179/030192399677121.
- Ray HS, Pal S. Simple method for theoretical estimation of viscosity of oxide melts using optical basicity. Ironmak Steelmak. 2004;31:125–130. https://doi.org/10.1179/030192304225012097.
- Shankar A, Görnerup M, Lahiri AK, et al. Estimation of viscosity of blast furnace type slags. Ironmak Steelmak. 2007;34:477–481. https://doi.org/10.1179/174328107X17467.
- Wang C, Zhang JL, Jiao KX, et al. Influence of basicity and MgO/Al2O3 ratio on the viscosity of blast furnace slags containing chloride. Metall Res Technol. 2017;114:205), https://doi.org/10.1051/metal/2016064.
- Gao YM, Wang SB, Hong C, et al. Effects of basicity and MgO content on the viscosity of the SiO2–CaO–MgO–9wt% Al2O3 slag system. Int J Miner Metall Mater. 2014;21:353–362. https://doi.org/10.1007/s12613-014-0916-7.
- Zhang XF, Jiang T, Xue XX, et al. Cover picture: steel research int. 1/2016. Steel Res Int 2016;87:1. doi: 10.1002/srin.201670011
- Shen FM, Zheng HY, Jiang X, et al. Iron Steel. 2014;491:1.
- Xu J-F, Zhang J-Y, Jie C, et al. Experimental measurements and modelling of viscosity in CaO–Al2O3–MgO slag system. Ironmak Steelmak. 2011;38(5):329–337. https://doi.org/10.1179/1743281210Y.0000000014.
- Kundu AL, Prasad SC, Prakash HS, et al. Strategy for the production of low Si and low S HM at RSP. Trans Indian Inst Met. 2004;57(2):109–121.
- Ghosh D, Krishnamurthy VA, Sankaranarayanan SR. Application of optical basicity of high alumina blast furnace slags. J Min Metall. B Metall. 2010;46(1):41–49. https://doi.org/10.2298/JMMB1001041G.
- Jiao K, Zhang J, Liu Z, et al. Effect of MgO/Al2O3 ratio on viscosity of blast furnace primary slag. High Temp Mater Proc. 2019;38:354–361. https://doi.org/10.1515/htmp-2018-0019.
- Osborn EF, DeVries RC, Gee KH, et al. Optimum composition of blast furnace slag ad deduced from liquidus data for the quaternary system CaO–MgO–Al2O3–SiO2. J Met. 1954;6:33–45. https://doi.org/10.1007/BF03397977.
- Dong J, Zhang D, Gan L. An empirical formula for accurate calculation of liquidus temperature of blast furnace slags in SiO2–Al2O3–CaO–MgO system. Ironmak Steelmak. 2017. doi:10.1080/03019233.2017.1340545.
- Agrawal A, Singh RS, Singh MK. Improving the burdening practice by optimization of raw flux calculation in blast furnace burden. Ironmak Steelmak. 2019. doi:10.1080/03019233.2019.1678857.
- Agrawal A, Vishwakarma RK, Tripathi VR, et al. Improvement in casting practice by controlling the drainage rate and hearth liquid level to develop an efficient casthouse management practice in blast furnace. Ironmak Steelmak. 2019;46(4):373–382. doi:10.1080/03019233.2017.1400732.
- Agrawal A, Kothari AK, Ramakrishna Rao K, et al. Effect of hearth liquid level on the productivity of blast furnace. Trans Indian Inst Met. 2019;72(4):867–876. doi:10.1007/s12666-018-1545-z.
- Agrawal A, Kor SC, Nandy U, et al. Real-time blast furnace hearth liquid level monitoring system. Ironmak Steelmak. 2016;43(7):550–558. doi:10.1080/03019233.2015.1127451.
- Agrawal A, Kothari AK, Ramna RV, et al. A review on liquid level measurement techniques using mathematical models and field sensors in blast furnace. Metall Res Technol. 2019;116(3):307. doi:10.1051/metal/2018100.
- Agrawal A, Tiwari M, Agarwal MK, et al. Drainage rate and hearth liquid level estimation in absence of direct measurements in blast furnace. Ironmak Steelmak. 2018. doi:10.1080/03019233.2018.1559523.
- Visser HJ. Modelling of injection processes in ladle metallurgy. Delft: Delft University of Technology; 2016. https://doi.org/10.4233/uuid:1d62a001-7eb5-4faa-9d55-cbe9431c5eee.
- Schrama FNH, Beunder EM, den Berg BV, et al. Sulphur removal in ironmaking and oxygen steelmaking. Ironmak Steelmak. 2017;44(5):333–343. https://doi.org/10.1080/03019233.2017.1303914.