Effect of TiO₂ on fluoride evaporation from CaF₂–CaO–Al₂O₃–MgO–Li₂O–(TiO₂) slag

References

• Hou D, Jiang ZH, Dong YW, et al. Thermodynamic design of electroslag remelting slag for high titanium and low aluminium stainless steel based on IMCT. Ironmak Steelmak. 2016;43(7):517–525. doi: https://doi.org/10.1080/03019233.2015.1110920
   Web of Science ®Google Scholar
• Shi CB, Zheng DL, Shin SH, et al. Effect of TiO2 on the viscosity and structure of low-fluoride slag used for electroslag remelting of Ti-containing steels. Int J Miner Metall Mater. 2017;24(1):18–24. doi: https://doi.org/10.1007/s12613-017-1374-9
   Web of Science ®Google Scholar
• Arefpour A, Monshi A, Khayamian T, et al. Investigation of viscosity's effects on continuous casting of steel mold powders containing B2O3, Li2O, TiO2, Fe2O3, ZnO and Na2O. Engineering. 2012;4(08):435. doi: https://doi.org/10.4236/eng.2012.48057
   Google Scholar
• Shi CB, Li J, Cho JW, et al. Effect of SiO2 on the crystallization behaviors and in-mold performance of CaF2-CaO-Al2O3 slags for drawing-ingot-type electroslag remelting. Metall Mater Trans B. 2015;46(5):2110–2120. doi: https://doi.org/10.1007/s11663-015-0402-2
   Web of Science ®Google Scholar
• Persson M, Seetharaman S, Seetharaman S. Kinetic studies of fluoride evaporation from slags. ISIJ Int. 2007;47(12):1711–1717. doi: https://doi.org/10.2355/isijinternational.47.1711
   Web of Science ®Google Scholar
• Ju JT, An JL, Ji GH. Effect of CaF2 substitution with TiO2 on the crystallization characteristics of low-fluoride slag for electroslag remelting. J Min Metall Sect B. 2019;55(3):397–404. doi: https://doi.org/10.2298/JMMB190215034J
   Web of Science ®Google Scholar
• Zheng DL, Li J, Shi CB, et al. Effect of TiO2 on the crystallisation behaviour of CaF2-CaO-Al2O3-MgO slag for electroslag remelting of Ti-containing tool steel. Ironmak Steelmak. 2018;45(2):135–144. doi: https://doi.org/10.1080/03019233.2016.1248699
   Web of Science ®Google Scholar
• Schwerdtfeger K, Wepner W, Pateisky G. Modelling of chemical reactions occurring during electroslag remelting: oxidation of Ti in stainless steel. Ironmak Steelmak. 1978;5(3):135–143.
   Google Scholar
• Hou D, Jiang ZH, Dong YW, et al. Effect of slag composition on the oxidation kinetics of alloying elements during electroslag remelting of stainless steel: part-2 control of titanium and aluminum content. ISIJ Int. 2017;57(8):1410–1419. doi: https://doi.org/10.2355/isijinternational.ISIJINT-2017-148
   Web of Science ®Google Scholar
• Hou D, Jiang Z H, Qu T P, et al. Aluminum, titanium and oxygen control during electroslag remelting of stainless steel based on thermodynamic analysis. J Iron Steel Res Int. 2019;26(1):20–31. doi: https://doi.org/10.1007/s42243-018-0107-2
   Web of Science ®Google Scholar
• Shi CB. Deoxidation of electroslag remelting (ESR) – a review. ISIJ Int. 2020;60(6). DOI:https://doi.org/10.2355/isijinternational.ISIJINT-2019-661.
   Web of Science ®Google Scholar
• Zaitsev AI, Leites AV, Lrtvina AD, et al. Investigation of the mould powder volatiles during continuous casting. Steel Res. 1994;65(9):368–374. doi: https://doi.org/10.1002/srin.199401179
   Web of Science ®Google Scholar
• Zhang ZT, Sridhar S, Cho JW. An investigation of the evaporation of B2O3 and Na2O in F-free mold slags. ISIJ Int. 2011;51(1):80–87. doi: https://doi.org/10.2355/isijinternational.51.80
   Web of Science ®Google Scholar
• Tong ZF, Qiao JL, Jiang XY. Kinetics of Na2O evaporation from CaO-Al2O3-SiO2-MgO-TiO2-Na2O slags. Ironmak Steelmak. 2017;44(4):237–245. doi: https://doi.org/10.1080/03019233.2016.1210354
   Web of Science ®Google Scholar
• Shi CB, Cho JW, Zheng DL, et al. Fluoride evaporation and crystallization behavior of CaF2-CaO-Al2O3-(TiO2) slag for electroslag remelting of Ti-containing steels. Int J Miner Metall Mater. 2016;23(6):627–636. doi: https://doi.org/10.1007/s12613-016-1275-3
   Web of Science ®Google Scholar
• Gao JX, Wen GH, Liu Q, et al. Effect of Al2O3 on the fluoride volatilization during melting and ion release in water of mold flux. J Non-Cryst Solids. 2015;409:8–13. doi: https://doi.org/10.1016/j.jnoncrysol.2014.11.014
   Web of Science ®Google Scholar
• Liu Y, Zhang Z, Li GQ, et al. Investigation of fluoride vaporization from CaF2-CaO-Al2O3 slag for vacuum electroslag remelting. Vacuum. 2018;158:6–13. doi: https://doi.org/10.1016/j.vacuum.2018.09.027
   Web of Science ®Google Scholar
• Viswanathan NN, Fatemeh S, Sichen D, et al. Estimation of escape rate of volatile components from slags containing CaF2 during viscosity measurement. Steel Res. 1999;70(2):53–58. doi: https://doi.org/10.1002/srin.199905600
   Web of Science ®Google Scholar
• Chilov A. Mass spectrometric study of volatile components in mould powders. Helsinki University of Technology Espoo; 2005.
   Google Scholar
• Shahbazian F, Du S, Seetharaman S. Viscosities of some fayalitic slags containing CaF2. ISIJ Int. 1999;39(7):687–696. doi: https://doi.org/10.2355/isijinternational.39.687
   Web of Science ®Google Scholar
• Allibert M, Chatillon C. Mass spectrometry measurements of CaF2 and CaO activities in CaF2-CaO-Al2O3 slags at 1700K. Can Metall Q. 1979;18(3):349–354. doi: https://doi.org/10.1179/cmq.1979.18.3.349
   Web of Science ®Google Scholar
• Zheng D L, Li J, Shi C B, et al. Crystallization characteristics and in-mold performance of electroslag remelting-type TiO2-bearing slag. Metall Mater Trans B. 2019;50(3):1148–1160. doi: https://doi.org/10.1007/s11663-019-01536-w
   Web of Science ®Google Scholar
• Wang Z, Shu Q, Chou K. Viscosity of fluoride-free mold fluxes containing B2O3 and TiO2. Steel Res Int. 2013;84(8):766–776. doi: https://doi.org/10.1002/srin.201200256
   Web of Science ®Google Scholar
• Zheng K, Zhang ZT, Liu LL, et al. Investigation of the viscosity and structural properties of CaO-SiO2-TiO2 slags. Metall Mater Trans B. 2014;45(4):1389–1397. doi: https://doi.org/10.1007/s11663-014-0053-8
   Web of Science ®Google Scholar
• Li JL, Shu QF, Chou KC. Effect of TiO2 addition on viscosity and structure of CaO-Al2O3 based mould fluxes for high Al steel casting. Can Metall Q. 2015;54(1):85–91. doi: https://doi.org/10.1179/1879139514Y.0000000154
   Web of Science ®Google Scholar
• Park H, Park JY, Kim GH, et al. Effect of TiO2 on the viscosity and slag structure in blast furnace type slags. Steel Res Int. 2012;83(2):150–156. doi: https://doi.org/10.1002/srin.201100249
   Web of Science ®Google Scholar
• Dong XJ, Sun HY, She XF, et al. Viscosity and viscosity estimation model of fully liquid slags in TiO2-Al2O3-CaO-SiO2 and TiO2-Al2O3-CaO-SiO2-MgO systems with high TiO2 concentration and low mass ratio of CaO to SiO2. Ironmak Steelmak. 2014;41(2):99–106. doi: https://doi.org/10.1179/1743281212Y.0000000099
   Web of Science ®Google Scholar
• Feng C, Chu MS, Tang J, et al. Effects of MgO and TiO2 on the viscous behaviors and phase compositions of titanium-bearing slag. Int J Miner Metall Mater. 2016;23(8):868–880. doi: https://doi.org/10.1007/s12613-016-1302-4
   Web of Science ®Google Scholar