References
- Zhou Z, Liu Y, Wang G, et al. Effect of local oxygen-enrichment ways of oxygen-coal double lance on coal combustion. ISIJ Int. 2017;57(2):279–285. doi:10.2355/isijinternational.ISIJINT-2016-535.
- Wijayanta AT, Alam MS, Nakaso K, et al. Combustibility of biochar injected into the raceway of a blast furnace. Fuel Process Technol. 2014;117:53–59. doi:10.1016/j.fuproc.2013.01.012.
- Kuang S, Li Z, Yu A. Recent developments in the modeling and simulation of blast furnace ironmaking. Steel Res Int. 2017;87(9999):1–25. doi:10.1002/srin.201700071.
- Shen YS, Guo BY, Yu AB, et al. Three-dimensional modelling of in-furnace coal/coke combustion in a blast furnace. Fuel. 2011;90(2):728–738. doi:10.1016/j.fuel.2010.08.030.
- Majeski A, Runstedtler A, D’Alessio J, et al. Injection of pulverized coal and natural gas into blast Furnaces for Iron-making : lance positioning and design. ISIJ Int. 2015;55(7):1377–1383. doi:10.2355/isijinternational.55.1377.
- Castro JD, Nogami H, Yagi J. Three-dimensional multiphase mathematical modeling of the blast furnace based on the multifluid model. ISIJ Int. 2002;42(1):44–52. doi: 10.2355/isijinternational.42.44
- Liao J, Yu AB, Shen Y. Modelling the injection of upgraded brown coals in an ironmaking blast furnace. Powder Technol. 2017;314:550–556. doi:10.1016/j.powtec.2016.11.005.
- Shen YS, Maldonado D, Guo BY, et al. Computational fluid dynamics study of pulverized coal combustion in blast furnace raceway. Ind Eng Chem Res. 2009;48:10314–10323. doi:10.1021/ie900853d.
- Ballal NB. Some challenges and opportunities in blast furnace operations. Trans Indian Inst Met. 2013;66(5–6):483–489. doi:10.1007/s12666-013-0308-0.
- Du SW, Chen WH, Lucas JA. Pulverized coal burnout in blast furnace simulated by a drop tube furnace. Energy. 2010;35:576–581. doi:10.1016/j.energy.2009.10.028.
- Castro Jd, Araújo GDM, Mota IDO, et al. Analysis of the combined injection of pulverized coal and charcoal into large blast furnaces. J Mater Res Technol. 2013;2(4):308–314. doi:10.1016/j.jmrt.2013.06.003.
- Kalkreuth W, Borrego AG, Alvarez D, et al. Exploring the possibilities of using Brazilian subbituminous coals for blast furnace pulverized fuel injection. Fuel. 2005;84:763–772. doi:10.1016/j.fuel.2004.11.007.
- Lu L, Sahajwalla V, Kong C, et al. Chemical structure of chars prepared under conditions prevailing in the blast furnace PCI operation. ISIJ Int. 2002;42(8):816–825. doi:10.2355/isijinternational.42.816.
- Zhou Z, Huo H, Wang G, et al. Effect of oxygen-coal lance configurations on coal combustion Behavior. Steel Res Int. 2017;88(1):1–9. doi:10.1002/srin.201600197.
- Chung JK, Han JW, Lee JH. Coke properties at tuyere level in blast furnace with pulverized coal injection. Met Mater. 1996;2(1):1–7. doi:10.1007/BF03025940.
- Chung J-K, Hur N-S. Tuyere level coke coal injection characteristics In blast furnace with pulverized. ISIJ Int. 1997;37(11):9–1. doi:10.2355/isijinternational.37.119.
- Wijayanta AT, Alam MS, Nakaso K, et al. Numerical study on pulverized biochar injection in blast furnace. ISIJ Int. 2014;54(7):1521–1529. doi:10.2355/isijinternational.54.1521.
- Ueda S, Natsui S, Nogami H, et al. Recent progress and future perspective on mathematical modeling of blast furnace. ISIJ Int. 2010;50(7):914–923. doi:10.2355/isijinternational.50.914.
- Miao Z, Zhou Z, Yu AB, et al. CFD-DEM simulation of raceway formation in an ironmaking blast furnace. Powder Technol. 2017;314:542–549. doi:10.1016/j.powtec.2016.11.039.
- Okosun T, Silaen AK, Zhou CQ. Review on computational modeling and visualization of the ironmaking blast furnace at Purdue University Northwest. Steel Res Int. 2018;1900046:1–16. doi:10.1002/srin.201900046.
- Shen Y, Guo B, Yu A, et al. Three-dimensional modelling of coal combustion in blast furnace. ISIJ Int. 2008;48(6):777–786. doi:10.2355/isijinternational.48.777.
- Shen Y, Guo B, Yu A, et al. Model study of the effects of coal properties and blast conditions on pulverized coal combustion. ISIJ Int. 2009;49(6):819–826. doi:10.2355/isijinternational.49.819.
- Shen YS, Guo BY, Yu AB, et al. A three-dimensional numerical study of the combustion of coal blends in blast furnace. Fuel. 2009;88(2):255–263. doi:10.1016/j.fuel.2008.08.013.
- Shen YS, Yu AB. Modelling of injecting a ternary coal blend into a model ironmaking blast furnace. Miner Eng. 2015;90:89–95. doi:10.1016/j.mineng.2015.12.009.
- Shen Y, Yu A, Austin P, et al. Modelling in-furnace phenomena of pulverized coal injection in ironmaking blast furnace: effect of coke bed porosities. Miner Eng. 2012;33:54–65. doi:10.1016/j.mineng.2011.10.014.
- Shen YS, Yu AB, Austin PR, et al. CFD study of in-furnace phenomena of pulverised coal injection in blast furnace: effects of operating conditions. Powder Technol. 2012;223:27–38. doi:10.1016/j.powtec.2011.07.020.
- Shen Y, Shiozawa T, Austin P, et al. Model study of the effect of bird’s nest on transport phenomena in the raceway of an ironmaking blast furnace. Miner Eng. 2014;63:91–99. doi:10.1016/j.mineng.2014.01.008.
- Shen Y, Yu A. Characterization of coal burnout in the raceway of an ironmaking blast furnace. Steel Res Int. 2015;86(6):604–611. doi:10.1002/srin.201400333.
- Castro JA, Baltazar AWS, Silva AJ. A three dimensional three phase reactive flow for simulating the pulverized coal injection into the channel of the blast furnace raceway. WIT Trans Eng Sci. 2005;50:207–216.
- Guo B, Zulli P, Rogers H, et al. Three-dimensional simulation of flow and combustion for pulverised coal injection. ISIJ Int. 2005;45(9):1272–1281. doi:10.2355/isijinternational.45.1272.
- Mathieson JG, Truelove JS, Rogers H. Toward an understanding of coal combustion in blast furnace tuyere injection. Fuel. 2005;84(10):1229–1237. doi:10.1016/j.fuel.2004.06.036.
- ANSYS. ANSYS CFX-Solver theory guide. Canonsburg (PA): ANSYS Inc; 2016.
- Gosman AD, Ioannides E. Aspects of computer simulation of liquid-fueled combustors. J Energy. 1983;7(6):482–490. doi: 10.2514/3.62687
- Ubhayakar SK, Stickler DB, Von Rosenberg CW, et al. Rapid devolatilization of pulverized coal in hot combustion gases. 16th Symp Combust. 1977:427–436. doi: 10.1016/S0082-0784(77)80342-1
- Magnussen BF, Hjertager BH. On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion. Symp Combust. 1976;16(1):719–729. doi:10.1016/S0082-0784(77)80366-4.
- Shiozawa T. Numerical modelling of multiphase flow in raceway of ironmaking blast furnace. The University of New South Wales (Thesis), 2013.