Research on twin-roll strip cast-rolling based on a new sectional roll surface heat transfer boundary condition

References

• Rodrigues C, Ludwig A, Kharicha A, et al. Modeling of the twin-roll casting process: transition from casting to rolling. Trans Indian Inst Met 2018;71(11):2645–2649. doi: 10.1007/s12666-018-1423-8
   Web of Science ®Google Scholar
• Grydin O, Stolbchenko M, Bauer M, et al. Asymmetric twin-roll casting of an Al-Mg-Si-Alloy. Mater Sci Forum. 2018;918:48–53. doi: 10.4028/www.scientific.net/MSF.918.48
   Google Scholar
• Hussain Z, Nasir LMM, Anasyida AS, et al. Solidification of aluminum copper alloy during twin roll strip casting. Adv Mater Res 2014;1024:231–234. doi: 10.4028/www.scientific.net/AMR.1024.231
   Google Scholar
• Heo JY, Baek MS, Euh KJ, et al. Microstructure, tensile and fatigue properties of Al–5 wt.%Mg alloy manufactured by twin roll strip casting. Met Mater Int 2018;24(5):992–1001. doi: 10.1007/s12540-018-0123-6
   Web of Science ®Google Scholar
• Al-Helal K, Chang I, Patel JB, et al. Thermomechanical treatment of high-Shear melt-conditioned twin-roll cast strip of recycled AA5754 Alloy. JOM. 2018;71(6):2018–2024. doi: 10.1007/s11837-018-3190-8
   Web of Science ®Google Scholar
• Lee SW. Mathematical modelling of a twin-roll strip casting process with turbulent flow. Korean J Chem Eng 1992;9(4):199–205. doi: 10.1007/BF02705293
   Web of Science ®Google Scholar
• Launder BE, Sharma BI. Application of the energy-dissipation model of turbulence to the calculation of flow near a spinning disc. Lett Heat Mass Transfer. 1974;1(2):131–137. doi: 10.1016/0094-4548(74)90150-7
   Google Scholar
• Kim WS, Kim DS, Kuznetsov AV. Simulation of coupled turbulent flow and heat transfer in the wedge-shaped pool of a twin-roll strip casting process. Int J Heat Mass Transfer. 2000;43(20):3811–3822. doi: 10.1016/S0017-9310(00)00013-2
   Web of Science ®Google Scholar
• Zhang XM, Jiang ZY, Yang LM, et al. Flow and temperature analysis of molten pool in twin-roll strip casting process. Key Eng Mater 2007;340–341:695–700. doi: 10.4028/www.scientific.net/KEM.340-341.695
   Google Scholar
• Banki R, Hoteit H, Firoozabadi A. Mathematical formulation and numerical modeling of wax deposition in pipelines from enthalpy–porosity approach and irreversible thermodynamics. Int J Heat Mass Transfer. 2008;51(13–14):3387–3398. doi: 10.1016/j.ijheatmasstransfer.2007.11.012
   Web of Science ®Google Scholar
• Guthrie RIL, Tavares RP. Mathematical and physical modelling of steel flow and solidification in twin-roll/horizontal belt thin-strip casting machines. Appl Math Model 1998;22(11):851–872. doi: 10.1016/S0307-904X(98)10027-6
   Web of Science ®Google Scholar
• Sahoo S, Ghosh S. Heat transfer, solidification, and microstructural evolution in Al–33Cu alloy during the starting of twin roll strip casting. Steel. Res. Int. 2014;85(2):207–218. doi: 10.1002/srin.201200262
   Web of Science ®Google Scholar
• Stolbchenko M, Grydin O, Samsonenko A, et al. Numerical analysis of the twin-roll casting of thin aluminium-steel clad strips. Forsch Ingenieurwes 2014;78(3–4):121–130. doi: 10.1007/s10010-014-0182-x
   Web of Science ®Google Scholar
• Park JJ. Numerical simulations of twin-roll casting for Mg-AZ31 and AA3003 sheets. J Phys Conf Ser 2017;896:012069. doi: 10.1088/1742-6596/896/1/012069
   Google Scholar
• Bae JW, Kang CG, Kang SB. Mathematical model for the twin roll type strip continuous casting of magnesium alloy considering thermal flow phenomena. J Mater Process Technol 2007;191(1):251–255. doi: 10.1016/j.jmatprotec.2007.03.058
   Web of Science ®Google Scholar
• Li Q, Zhang YK, Liu LG, et al. Effect of casting parameters on the freezing point position of the 304 stainless steel during twin-roll strip casting process by numerical simulation. J Mater Sci 2012;47(9):3953–3960. doi: 10.1007/s10853-012-6246-0
   Web of Science ®Google Scholar
• Miao YC, Zhang XM, Di HS, et al. Numerical simulation of the fluid flow, heat transfer, and solidification of twin-roll strip casting. J Mater Process Technol 2006;174(1):7–13. doi: 10.1016/j.jmatprotec.2005.01.002
   Web of Science ®Google Scholar
• Li JT, Xu GM, Yu HL, et al. Optimization and application of process parameters in an AZ61 alloy twin-roll strip casting. Mater Sci Forum. 2014;773–774:130–136. doi: 10.4028/www.scientific.net/MSF.773-774.130
   Google Scholar
• Griffiths WD, Kayikci R. The effect of varying chill surface roughness on interfacial heat transfer during casting solidification. J Mater Sci 2007;42(11):4036–4043. doi: 10.1007/s10853-006-0388-x
   Web of Science ®Google Scholar
• Liu L, Liao B, Guo J, et al. 3D numerical simulation on thermal flow coupling field of stainless steel during twin-roll casting. J Mater Eng Perform 2014;23(1):39–48. doi: 10.1007/s11665-013-0749-y
   Web of Science ®Google Scholar
• Lv Z, Du F, An Z, et al. Centerline segregation mechanism of twin-roll cast A3003 strip. J Alloys Compd 2015;643:270–274. doi: 10.1016/j.jallcom.2015.04.132
   Web of Science ®Google Scholar
• Seyedein SH, Hasan M. A three-dimensional simulation of coupled turbulent flow and macroscopic solidification heat transfer for continuous slab casters. Int J Heat Mass Transfer. 1997;40(18):4405–4423. doi: 10.1016/S0017-9310(97)00064-1
   Web of Science ®Google Scholar
• Brinkman HC. A calculation of the viscous force exerted by a flowing fluid on a dense swarm of particles. Appl Sci Res 1946;1(1):27–34. doi: 10.1007/BF02120313
   Google Scholar
• Asai S, Muchi I. Theoretical analysis and model experiments on the formation mechanism of channel-type segregation. Trans Iron Steel Inst. Jpn. 1978;18(2):90–98. doi: 10.2355/isijinternational1966.18.90
   Google Scholar
• Mizukami H, Suzuki T, Umeda T. Temperature measurement during rapid solidification of 18Cr-8Ni stainless steel and Its initial solidification structure. Tetsu-to-Hagané. 1991;77(10):1672–1679. doi: 10.2355/tetsutohagane1955.77.10_1672
   Web of Science ®Google Scholar
• Löser W, Thiem S, Jurisch M. Solidification modelling of microstructures in near-net-shape casting of steels. Mater Sci Eng A. 1993;173(1–2):323–326. doi: 10.1016/0921-5093(93)90237-9
   Web of Science ®Google Scholar
• Fang Y, Wang Z, Yang QX, et al. Numerical simulation of the temperature fields of stainless steel with different roller parameters during twin-roll strip casting. Int J Miner, Metall Mater. 2009;03:58–62.
   Google Scholar
• Rai R, Elmer JW, Palmer TA, et al. Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium. J Phys D: Appl Phys 2007;40(18):5753–5766. doi: 10.1088/0022-3727/40/18/037
   Web of Science ®Google Scholar
• Blackwell BF, Gill W, Dowding K, et al. Uncertainty estimation in the determination of thermal conductivity of 304 stainless steel. Off Sci Res Inf Tech Rep. 2000;140(1):13–16.
   Google Scholar
• Aboutalebi MR, Hasan M, Guthrie RIL. Coupled turbulent flow, heat, and solute transport in continuous casting processes. Metall Mater Trans B. 1995;26(4):731–744. doi: 10.1007/BF02651719
   Web of Science ®Google Scholar
• Lait JE, Brimacombe JK, Weinberg F. Mathematical modelling of heat flow in the continuous casting of steel. Ironmak Steelmak. 1974;1(2):90–97.
   Google Scholar
• Guthrie RIL, Isac M, Kim JS, et al. Measurements, simulations, and analyses of instantaneous heat fluxes from solidifying steels to the surfaces of twin roll casters and of aluminum to plasma-coated metal substrates. Metall Mater Trans B. 2000;31(5):1031–1047. doi: 10.1007/s11663-000-0079-y
   Web of Science ®Google Scholar
• Yasunaka H, Taniguchi K, Kokita M, et al. Surface quality of stainless steel type 304 cast by twin-roll type strip caster. ISIJ Int 1995;35(6):784–789. doi: 10.2355/isijinternational.35.784
   Web of Science ®Google Scholar