Effect of the microstructure on the crack initiation during thermal cycling of Nb–Ti-bearing continuous casting slabs

References

• Kumar S, Desai R. Effect of boron micro-alloying on microstructure and corrosion behavior of dual-phase steel. J Mater Eng Perform. 2019;28(10):6228–6236. doi: 10.1007/s11665-019-04364-w
   Web of Science ®Google Scholar
• Onyeji L, Kale G. preliminary investigation of the corrosion behavior of proprietary micro-alloyed steels in aerated and deaerated brine solutions. J Mater Eng Perform. 2017;26(12):5741–5752. doi: 10.1007/s11665-017-3031-x
   Web of Science ®Google Scholar
• Eskandari M, Zarei-Hanzaki A, Szpunar JA, et al. Microstructure evolution and mechanical behavior of a new microalloyed high Mn austenitic steel during compressive deformation. Mater Sci Eng. 2014;615:424–435. doi: 10.1016/j.msea.2014.07.084
   Google Scholar
• Ustrzycka A, Mróz Z, Kowalewski ZL, et al. Analysis of fatigue crack initiation in cyclic microplasticity regime. Int J Fatigue. 2020;131. doi: 10.1016/j.ijfatigue.2019.105342
   Web of Science ®Google Scholar
• Matveev MA, Kolbasnikov NG, Kononov AA. Causes of high temperature ductility Trough of microalloyed steels. Trans Indian Inst Met. 2017;70(8):2193–2204. doi: 10.1007/s12666-017-1042-9
   Web of Science ®Google Scholar
• Bhattacharya D, Misra S. Development of microalloyed steels through thin slab casting and rolling (TSCR) route. Trans Indian Inst Metals. 2016;70(6):1647–1659. doi: 10.1007/s12666-016-0963-z
   Web of Science ®Google Scholar
• Zhang H, Yang CZ, Wang ML, et al. Technology development for controlling slab transverse corner crack of typical micro-alloyed steels. J Iron Steel Res Int. 2015;22(2):99–105. doi: 10.1016/S1006-706X(15)60016-4
   Web of Science ®Google Scholar
• Jahazi M, Eghbali B. The influence of hot forging conditions on the microstructure and mechanical properties of two microalloyed steels. J Mater Process Technol. 2001;113(1-3):594–598. doi: 10.1016/S0924-0136(01)00599-4
   Web of Science ®Google Scholar
• Salikhov ZG, Ishmet'ev EN, Gazimov RT, et al. Effective use of cooling water in the secondary cooling zone of a continuous-casting machine. Steel Transl. 2010;40(3):229–232. doi: 10.3103/S0967091210030083
   Google Scholar
• Caron E, Wells MA. Film Boiling and water film ejection in the secondary cooling zone of the direct-chill casting process. Metall Mater Trans B. 2012;43(1):155–162. doi: 10.1007/s11663-011-9579-1
   Web of Science ®Google Scholar
• Pesin A, Pustovoytov D. Research of edge defect formation in plate rolling by finite element method. J Mater Process Technol; 2015;220:96–106. doi: 10.1016/j.jmatprotec.2015.01.001
   Web of Science ®Google Scholar
• Mandal G K, Rajinikanth V, Kumar S, et al. Microstructure Evolution during Hot deformation of a micro-alloyed steel. Trans Indian Inst Met. 2017;70(4):1019–1033. doi: 10.1007/s12666-016-0895-7
   Web of Science ®Google Scholar
• Eghbali B, Abdollah-Zadeh A. Influence of deformation temperature on the ferrite grain refinement in a low carbon Nb–Ti microalloyed steel. J Mater Process Technol. 2006;180(1-3):44–48. doi: 10.1016/j.jmatprotec.2006.04.018
   Web of Science ®Google Scholar
• Svec P, Schrek A. Microstructure and microhardness of fiber laser welded dual-phase steels with high-strength low-alloy steels. Strength Mater. 2017;49(4):531–538. doi: 10.1007/s11223-017-9896-y
   Web of Science ®Google Scholar
• Gunabalapandian K, Samanta S, Ranjan R, et al. Investigation of austenitization in low carbon microalloyed steel during continuous heating. Metallurgical and Materials Transactions A. 2017;48(5):2099–2104. doi: 10.1007/s11661-017-4014-0
   Web of Science ®Google Scholar
• Matveev MA, Kolbasnikov NG, Kononov AA. Refinement of the structure of microalloyed steels under plastic deformation near the temperatures of Polymorphic transformation. Met Sci Heat Treat. 2017;59(3–4):197–202. doi: 10.1007/s11041-017-0128-7
   Web of Science ®Google Scholar
• Cota AB, Lacerda CAM, Oliveira FLG, et al. Effect of the austenitizing temperature on the kinetics of ferritic grain growth under continuous cooling of a Nb microalloyed steel. Scr Mater. 2004;51(7):721–725. doi: 10.1016/j.scriptamat.2004.05.044
   Web of Science ®Google Scholar
• López B, Rodriguez-Ibabe JM. Some Metallurgical issues concerning austenite Conditioning in Nb-Ti and Nb-Mo microalloyed steels processed by near-Net-shape casting and DIRECT ROLLING TECHNOLOGIES. Metall Mater Trans A. 2016;48(6):1–11.
   Google Scholar
• Chatterjee A, Dutta A, Sk MB, et al. Effect of microalloy precipitates on the microstructure and texture of hot-deformed modified 9Cr-1Mo steel. Metall Mater Trans A. 2017;48(5):2410–2424. doi: 10.1007/s11661-017-4039-4
   Web of Science ®Google Scholar
• Balart MJ, Davis CL, Strangwood M. Observations of cleavage initiation at (Ti,V)(C,N) particles of heterogeneous composition in microalloyed steels. Scr Mater. 2004;50(3):371–375. doi: 10.1016/j.scriptamat.2003.10.009
   Web of Science ®Google Scholar
• Medina SF, Hernandez CA. Modelling of the dynamic recrystallization of austenite in low alloy and microalloyed steels. Acta Mater. 1996;44(1):165–171. doi: 10.1016/1359-6454(95)00154-6
   Web of Science ®Google Scholar
• Mintz B, Jonas JJ. Influence of strain rate on production of deformation induced ferrite and hot ductility of steels. Mater Sci Technol. 1994;10(8):721–727. doi: 10.1179/mst.1994.10.8.721
   Web of Science ®Google Scholar
• Astafurova E, Maier G, Melnikov E, et al. The influence of the thermomechanical processing regime on the structural evolution of Mo-Nb-Ti-V microalloyed steel subjected to high-pressure torsion. Metall Mater Trans A. 2017;48(7):3400–3409. doi: 10.1007/s11661-017-4085-y
   Web of Science ®Google Scholar
• Jun S, Zengjie D. Correlation between crack initiation toughness and dimple size. Ordnance Mater Sci Eng. 1989;03:38–45.
   Google Scholar