Treatment of vanadium–titanium magnetite based on composite agglomeration process (CAP)

References

• Lv X, Lun Z, Yin J, et al. Carbothermic reduction of vanadium titanomagnetite by microwave irradiation and smelting behavior. ISIJ Int. 2013;53(7):1115–1119. doi: 10.2355/isijinternational.53.1115
   Web of Science ®Google Scholar
• Taylor PR, Shuey SA, Vidal EE, et al. Extractive metallurgy of vanadium-containing titaniferous magnetite ores: a review. Min Metal Explor. 2006;23(2):80–86.
   Google Scholar
• Samanta S, Goswami MC, Baidya TK, et al. Mineralogy and carbothermal reduction behaviour of vanadium-bearing titaniferous magnetite ore in Eastern India. Int J Min Met Mater. 2013;20(10):917–924. doi: 10.1007/s12613-013-0815-3
   Web of Science ®Google Scholar
• Li W, Fu G, Chu M, et al. Oxidation induration process and kinetics of Hongge vanadium titanium-bearing magnetite pellets. Ironmak Steelmak. 2017;44(4):294–303. doi: 10.1080/03019233.2016.1210751
   Web of Science ®Google Scholar
• Zhang YK. Research and practice of improving quality and reducing consumption of vanadium titanium magnetite pellet. Changsha: Central South University Press; 2014; (in Chinese).
   Google Scholar
• Dehghanmanshadi A, Manuel J, Hapugoda S, et al. Sintering characteristics of titanium containing iron ores. ISIJ Int. 2014;54(10):2189–2195. doi: 10.2355/isijinternational.54.2189
   Web of Science ®Google Scholar
• Bristow NJ, Loo CE. Sintering properties of iron ore mixes containing titanium. ISIJ Int. 1992;32(7):819–828. doi: 10.2355/isijinternational.32.819
   Web of Science ®Google Scholar
• Jiang T, Li G, Wang H, et al. Composite agglomeration process (CAP) for preparing blast furnace burden. Ironmak Steelmak. 2010;37(1):1–7. doi: 10.1179/174328109X462995
   Web of Science ®Google Scholar
• Zhang Y, Liu B, Xiong L, et al. Recycling of carbonaceous iron-bearing dusts from iron & steel plants by composite agglomeration process (CAP). Ironmak Steelmak. 2017;44(7):532–543. doi: 10.1080/03019233.2016.1219564
   Web of Science ®Google Scholar
• Zhang Y, Du M, Su Z, et al. Preparation of blast furnace burdens with middle-low basicity from high-SiO2-content iron concentrates by composite agglomeration process (CAP). Ironmak Steelmak. 2018;45(6):566–575. doi: 10.1080/03019233.2017.1303913
   Web of Science ®Google Scholar
• Yu Z, Li G, Liu C, et al. Comparison of reduction disintegration characteristics of TiO2-rich burdens prepared with sintering process and composite agglomeration process. Int J Min Met Mater. 2016;23(4):389–398. doi: 10.1007/s12613-016-1248-6
   Web of Science ®Google Scholar
• Jiang T, Yu Z, Peng Z, et al. Preparation of BF burden from titanomagnetite concentrate by composite agglomeration process (CAP). ISIJ Int. 2015;55(8):1599–1607. doi: 10.2355/isijinternational.ISIJINT-2015-094
   Web of Science ®Google Scholar
• Li G, Liu C, Yu Z, et al. Energy saving of composite agglomeration process (CAP) by optimized distribution of pelletized feed. Energies. 2018;11(9):2382–2394. doi: 10.3390/en11092382
   Web of Science ®Google Scholar
• Heng Y. Investigation on the penumatics and mineralization behavior of composite agglomeration process (CAP) of iron ores, Central South University, 2011. (in Chinese).
   Google Scholar
• Pal J, Ghorai S, Goswami MC, et al. Development of pellet-sinter composite agglomerate for blast furnace. ISIJ Int. 2014;54(3):620–627. doi: 10.2355/isijinternational.54.620
   Web of Science ®Google Scholar
• Gu F, Zhang Y, Li G, et al. Preparation of blast furnace burdens by composite agglomeration process: effect of distribution of magnetite and hematite concentrates in pelletized and matrix feed. J. Iron Steel Res Int. 2020: 1–9. doi:10.1007/s42243-020-00376-2.
   Web of Science ®Google Scholar
• Jia Y, Zhang L, Hu C, et al. Research on basic properties for producing pellets by adding siderite. Min Metal Eng. 2012;32(01):73–76. (in Chinese).
   Google Scholar
• Yuan Z, Li L, Han Y, et al. Fragmentation mechanism of low-grade hematite ore in a high pressure grinding roll. J Central South Univ. 2016;23(11):2838–2844. doi: 10.1007/s11771-016-3347-y
   Web of Science ®Google Scholar
• Ren S, Zhang J, Wu L, et al. Effect of TiO2 on equilibrium phase sinter at oxygen partial pressure of 5×10−3 atm. Ironmak Steelmak. 2014;41(2):132–137. doi: 10.1179/1743281213Y.0000000111
   Web of Science ®Google Scholar
• Ellis BG, Loo CE, Witchard D. Effect of ore properties on sinter bed permeability and strength. Ironmak Steelmak. 2007;34(2):99–108. doi: 10.1179/174328107X165726
   Web of Science ®Google Scholar
• Wu S, Wang L, Lu Y, et al. Influence of high temperature interaction on the softening and melting behaviors of iron bearing materials in the blast furnace. Steel Res Int. 2018;89(12). doi: 10.1002/srin.201800041
   Web of Science ®Google Scholar