References
- Yang J, Xu L, Zhu K, et al. Improvement of HAZ toughness of steel plate for high heat input welding by inclusion control with Mg deoxidation. Steel Res Int. 2015;6:619–625. DOI:https://doi.org/10.1002/srin.201400313.
- Shi M, Yuan X, Huang H, et al. Effect of Zr addition on the microstructure and toughness of coarse-grained heat-affected zone with high-heat input welding thermal cycle in low-carbon steel. J Mater Eng Perform. 2017;26:3160–3168. DOI:https://doi.org/10.1007/s11665-017-2758-8.
- Lou H, Wang C, Wang B, et al. Effect of Ti–Mg–Ca treatment on properties of heat-affected zone after high heat input welding. J Iron Steel Res Int. 2019;26:501–511. DOI:https://doi.org/10.1007/s42243-018-0091-6.
- Lu J, Cheng G, Tian B, et al. Al addition on characteristics of MnS and formation of intragranular ferrite in non-quenched and tempered steel. ISIJ Int. 2018;58:921–928. DOI:https://doi.org/10.2355/isijinternational.ISIJINT-2017-617.
- Seo JS, Seo K, Kim HJ, et al. Effect of titanium content on weld microstructure and mechanical properties of bainitic GMA welds. Weld World. 2014;58:893–901. DOI:https://doi.org/10.1007/s40194-014-0168-1.
- Pan F, Zhang J, Chen HL, et al. Effects of rare earth metals on steel microstructures. Materials 2016;9:417. DOI:https://doi.org/10.3390/ma9060417.
- Thewlis G, Chao WT, Harrison PL, et al. Acicular ferrite development in autogenous laser welds using cerium sulphide particle dispersed steels. Mater Sci Tech. 2008;24:771–786. DOI:https://doi.org/10.1179/174328408X293621.
- Ren Q, Zhang L. Effect of cerium content on inclusions in an ultra-low-carbon aluminum-killed steel. Metall Mater Trans B. 2020;51:589–600. DOI:https://doi.org/10.1007/s11663-020-01779-y.
- Thewlis G. Effect of cerium sulphide particle dispersions on acicular ferrite microstructure development in steels. Mater Sci Tech. 2006;22:153–166. DOI:https://doi.org/10.1179/026708306X81432.
- Cao Y, Wan X, Hou Y, et al. In situ observation of grain refinement in the simulated heat-affected zone of Al–Ti-0.05% Ce-deoxidized steel. Steel Res Int. 2019;90:1900084. DOI:https://doi.org/10.1002/srin.201900084.
- Wang XN, Zhang SH, Zhou J, et al. Effect of heat input on microstructure and properties of hybrid fiber laser-arc weld joints of the 800 MPa hot-rolled Nb-Ti-Mo microalloyed steels. Opt Lasers Eng. 2017;91:86–96. DOI:https://doi.org/10.1016/j.optlaseng.2016.11.010.
- Okada H, Matsuda F, Ikeuchi K, et al. Decomposition behaviour of M-A constituent and recovery of toughness deterioration of HAZ toughness in 780 and 980 MPa class HSLA steels welded with high heat inputs and its improvement. Weld Int. 1995;9:211–216. DOI:https://doi.org/10.1080/09507119509548782.
- Sun J, Zou X, Matsuura H, et al. Effect of heat input on inclusion evolution behavior in heat-affected zone of EH36 shipbuilding steel. JOM. 2018;70:946–950. DOI:https://doi.org/10.1007/s11837-018-2824-1.
- Zou X, Zhao D, Sun J, et al. An integrated study on the evolution of inclusions in EH36 shipbuilding steel with Mg addition: from casting to welding. Metall Mater Trans B. 2018;49:481–489. DOI:https://doi.org/10.1007/s11663-017-1163-x.
- Geng R, Li J, Shi C. Evolution of calcium aluminate inclusions by cerium treatment in Al-killed steel during RH refining process. Steel Res Int. 2020. DOI:https://doi.org/10.1002/srin.202000117.
- Shi C, Yu W, Wang H, et al. Simultaneous modification of alumina and MgO·Al2O3 inclusions by calcium treatment during electroslag remelting of stainless tool steel. Metall Mater Trans B. 2017;48:146–161. DOI:https://doi.org/10.1007/s11663-016-0771-1.
- Park JS, Lee C, Park JH. Effect of complex inclusion particles on the solidification structure of Fe-Ni-Mn-Mo alloy. Metall Mater Trans B. 2012;43:1550–1564. DOI:https://doi.org/10.1007/s11663-012-9734-3.
- Xiong W, Song R, Yu P, et al. Phase transformation and precipitation mechanism of Nb microalloyed bainite-martensite offshore platform steel at different cooling rates. Steel Res Int 2019;90:1900224. DOI:https://doi.org/10.1002/srin.201900224.
- Saito G, Sakaguchi N, Ohno M, et al. Effects of fine precipitates on austenite grain refinement of micro-alloyed steel during cyclic heat treatment. ISIJ Int. 2019;59:2098–2104. DOI:https://doi.org/10.2355/isijinternational.ISIJINT-2019-153.
- Tian Q, Wang G, Zhao Y, et al. Precipitation behaviors of TiN inclusion in GCr15 bearing steel billet. Metall Mater Trans B. 2018;49:1149–1164. DOI:https://doi.org/10.1007/s11663-018-1230-y.
- Gao X, Ren H, Wang H, et al. Effect of lanthanum on the precipitation of NbC in bcc Fe. Mater Sci Technol. 2017;33:1136–1371. DOI:https://doi.org/10.1080/02670836.2017.1291565.
- Zheng D, Li J, Shi C, et al. Crystallization characteristics and in-mold performance of electroslag remelting-type TiO2-bearing slag. Metall Mater Trans B. 2019;50:1148–1160. DOI:https://doi.org/10.1007/s11663-019-01536-w.
- Geng R, Li J, Shi C, et al. Effect of rare earth of microstructure and properties of heat-affected zone of 700 MPa high strength steel. The 9th International Conference on Rare Earth Development and Application & Annual Meeting of the Chinese Society of Rare Earths 2019, Beijing, 2019.