References
- Mazumdar D, Singh OP, Dutta J, et al. Reduction of tundish skull and yield improvement in steel plants through physical modeling of steelmaking tundish systems. Trans Indian Inst Met. 2011;64:593–605.
- Raghavendra K, Sarkar S, Ajmani SK, et al. Mathematical modelling of single and multi-strand tundish for inclusion analysis. Appl Math Model. 2013;37:6284–6300.
- Jha PK, Rao PS, Dewan A. Effect of height and position of dams on inclusion removal in a six strand tundish. ISIJ Int. 2008;48:154–160.
- Mazumdar D. Tundish metallurgy: towards increased productivity and clean steel. Trans Indian Inst Met. 2013;66:597–610.
- Solhed H, Jonsson L, Jonsson P. A theoretical and experimental study of continuous-casting tundishes focusing on slag-steel interaction. Metall Mater Trans B. 2002;33:173–185.
- Mazumdar D, Guthrie RIL. The physical and mathematical modelling of continuous casting tundish system. ISIJ Int. 1999;39:524–547.
- Mabentsela A, Akdogan G, Bradshaw S. Numerical and physical modelling of tundish slag entrainment in the steelmaking process. J S Afr I Min Metall. 2017;117:469–486.
- Liangcai Z, Mingan W, Boyu C, et al. J Iron Steel Res Int. 2010;17:7–12.
- Koria SC, Kanth U. Model studies of slag carry-over during drainage of metallurgical vessels. Steel Res. 1994;65:8–14.
- Li HX, Wang Q, Jiang J, et al. Analysis of Factors affecting free surface vortex formation during steel teeming. ISIJ Int. 2016;56:94–102.
- Hammerschmid P, Dubke M, Weber L, et al. Vortex formation during drainage of metallurgical vessels. Ironmak Steelmak. 1984;11:332–339.
- Dubke M, Schwerdtfeger K. Phenomena occurring during drainage of metallurgical vessels. Effect of stopper rod on vortex formation and development of surface waves. Ironmak Steelmak. 1990;17:184–192.
- Morales RD, Maldonad OD, Calderon I, et al. Physical and mathematical models of vortex flows during the last stages of steel draining Operations from a ladle. ISIJ Int. 2013;53:782–791.
- Li HX, Wang Q, Lei H, et al. Mechanism analysis of free-surface vortex formation during steel teeming. ISIJ Int. 2014;54:1592–1600.
- Tan D, Ni Y, Zhang L. Two-phase sink vortex suction mechanism and penetration dynamic characteristics in ladle teeming process. J Iron Steel Res Int. 2017;24:669–677.
- Diaz GS, Banderas AR, Barreto JD, et al. AISTech. 2006;1:977–984.
- Hernandez SG, Barreto JD, Banderas AR, et al. Modeling study of the vortex and short circuit flow effect on inclusion Removal in a Slab tundish. Steel Res Int. 2010;81:453–460.
- Diaz GS, Banderas AR, Barreto JD, et al. Fluid dynamics of vortex formation in tundish operations: physical modelling. Steel Res Int. 2007;78:248–253.
- He O. Observations of vortex formation in the mould of a continuous Slab caster. ISIJ Int. 1993;33:343–345.
- Kumar A, Mazumdar D, Koria SC. Modeling of fluid flow and residence time distribution in a four-strand tundish for enhancing inclusion removal. ISIJ Int. 2008;48:38–47.
- Tripathi PK, Kumar DS, Rajendra T, et al. Proceedings of NMD-ATM 2016; Nov 2016, Kanpur, India.
- Kumar A, Koria SC, Mazumdar D. Basis for systematic hydrodynamic analysis of a multi-strand tundish. ISIJ Int. 2007;47:1618–1624.
- Jha PK, Dash SK, Kumar S. Fluid flow and mixing in a six strand billet caster tundish: a parametric study. ISIJ Int. 2001;41:1437–1446.
- Warzecha M, Merder T, Pfeifer H, et al. Investigation of flow characteristics in a six-strand CC tundish combining plant measurements, physical and mathematical modeling. Steel Res Int. 2010;81:987–993.
- Chattopadhyay K, Isac M, Guthrie RIL. Modelling of Non-isothermal melt flows in a four strand delta shaped billet caster tundish validated by water model experiments. ISIJ Int. 2012;52:2026–2035.
- Singh V, Ajmani SK, Pal AR, et al. Single strand continuous caster tundish furniture comparison for optimal performance. Ironmak Steelmak. 2012;39:171–179.
- Mazumdar D, Yamanoglu G, Shankarnarayanan R, et al. Similarity considerations in the physical modelling of steel making tundish systems. Steel Res. 1995;66:14–19.
- Zheng SG, Zhu MY. Optimisation of baffles in six strand round bloom continuous casting tundish: a physical modelling study. Ironmak Steelmak. 2006;33:398–406.