References
- Zamani A, Maini B. Flow of dispersed particles through porous media – deep bed filtration. J Pet Sci Eng. 2009;69:71–88. DOI:https://doi.org/10.1016/j.petrol.2009.06.016
- Qian FP, Huang NJ, Lu JL, et al. CFD–DEM simulation of the filtration performance for fibrous media based on the mimic structure. Comput Chem Eng. 2014;71:478–488. DOI:https://doi.org/10.1016/j.compchemeng.2014.09.018
- Yamaguchi K, Uno T, Yamamoto T, et al. Coke degradation mechanism and suppression measures during high-rate pulverized coal injection. Tetsu-to-Hagané. 1996;82:641–646.
- Puttinger S, Stocker H. Improving blast furnace raceway blockage detection. part 1: classification of blockage events and processing framework. ISIJ Int. 2019;59:466–473. DOI:https://doi.org/10.2355/isijinternational.ISIJINT-2018-530
- Zhou H, Wu SL, Kou MY, et al. Analysis of cohesive particle percolation in a packed bed using discrete element method. ISIJ Int. 2018;58:43–51. DOI:https://doi.org/10.2355/isijinternational.ISIJINT-2017-373
- Yamaoka H. Mechanisms of hanging caused by dust in a shaft furnace. ISIJ Int. 1991;31:939–946. DOI:https://doi.org/10.2355/isijinternational.31.939
- Hidaka N, Iyama J, Matsumoto T, et al. Entrainment of fine particles with upward gas flow in a packed bed of coarse particles. Powder Technol. 1998;95:265–271. DOI:https://doi.org/10.1016/S0032-5910(97)03357-3
- Chen J, Akiyama T, Nogami H, et al. Behavior of powders in a packed bed with lateral inlets. ISIJ Int. 1994;34:133–139. DOI:https://doi.org/10.2355/isijinternational.34.133
- Shibata K, Shimizu M, Inaba S, et al. Pressure loss and hold-up powders for gas-powder two phase flow in packed beds. ISIJ Int. 1991;31:434–439. DOI:https://doi.org/10.2355/isijinternational.31.434
- Takahashi H, Kawai H, Kondo T, et al. Permeation and blockage of fine particles transported by updraft through a packed Bed. ISIJ Int. 2011;51:1608–1616. DOI:https://doi.org/10.2355/isijinternational.51.1608
- Dong XF, Pinson D, Zhang SJ, et al. Gas–powder flow and powder accumulation in a packed bed. Powder Technol. 2004;149:1–9. DOI:https://doi.org/10.1016/j.powtec.2004.09.040
- Zhou H, Wu SL, Kou MY, et al. Experimental study and numerical simulation of dust accumulation in bustle pipe of COREX shaft furnace with areal gas distribution beams. Ironmak Steelmak. 2019; 46(10):980–986. DOI:https://doi.org/10.1080/03019233.2018.1470361
- Pintowantoro S, Nogami H, Yagi J. Numerical analysis of static holdup of fine particles in blast furnace. ISIJ Int. 2004;44:304–309. DOI:https://doi.org/10.2355/isijinternational.44.304
- Shen YS, Yu AB, Austin PR, et al. Modelling in-furnace phenomena of pulverized coal injection in ironmaking blast furnace: effect of coke bed porosities. Miner Eng. 2012;33:54–65. DOI:https://doi.org/10.1016/j.mineng.2011.10.014
- Dong XF, Pinson D, Zhang SJ, et al. Gas-powder flow in blast furnace with different shapes of cohesive zone. Appl Math Model. 2006;30:1293–1309. DOI:https://doi.org/10.1016/j.apm.2006.03.004
- Cundall PA, Strack ODL. A discrete numerical model for granular assemblies. Geotechnique. 1979;29:47–65.
- Zhu HP, Zhou ZY, Yang RY, et al. Discrete particle simulation of particulate systems: a review of major applications and findings. Chem Eng Sci. 2008;63:5728–5770. DOI:https://doi.org/10.1016/j.ces.2008.08.006
- Han LH, Luo ZG, Zhou H, et al. Influence of cohesive zone shape on solid flow in COREX melter gasifier by discrete element method. J Iron Steel Res Int. 2015;22:304–310. DOI:https://doi.org/10.1016/S1006-706X(15)30004-2
- Sun JJ, Luo ZG, Zou ZS. Numerical simulation of raceway phenomena in a COREX melter–gasifier. Powder Technol. 2015;281:159–166. DOI:https://doi.org/10.1016/j.powtec.2015.05.002
- Remon S. DEM simulation of small particles clogging in the packing of large beads. Phys Rev A. 2010;389:4485. DOI:https://doi.org/10.1016/j.physa.2010.06.033
- Kikuchi S, Kon T, Ueda S, et al. Analysis of powder motion in a packed bed of blast furnace using the discrete element method. ISIJ Int. 2015;55:1313–1320. DOI:https://doi.org/10.2355/isijinternational.55.1313
- Fukuda M, Suzuki J, Kawai H, et al. Numerical analysis on passage and blockage behaviors of fine particles through an orifice consists of coarse particles. ISIJ Int. 2015;55:1291–1298. DOI:https://doi.org/10.2355/isijinternational.55.1291
- Luo ZG, Zhou H, Zhang T, et al. DEM study of blockage behaviour of cohesive fine particles in a packed structure of large particles. Powder Technol. 2017;314:102–109. DOI:https://doi.org/10.1016/j.powtec.2016.08.053
- Suzuki A, Maruoka N, Oishi Y, et al. Simulation of powder motion with particle contact model including intervening liquid. ISIJ Int. 2020;60:1538–1544. DOI:https://doi.org/10.2355/isijinternational.ISIJINT-2020-072
- Natsui S, Ueda S, Nogami H, et al. Gas–solid flow simulation of fines clogging a packed bed using DEM–CFD. Chem Eng Sci. 2012;71:274–282. DOI:https://doi.org/10.1016/j.ces.2011.12.035
- Stephan SA, Oishi Y, Kawai H, et al. Numerical simulation on phenomena of fine particles passing through an orifice under Gas flow condition. ISIJ Int. 2020;60:1528–1537. DOI:https://doi.org/10.2355/isijinternational.ISIJINT-2020-066
- Satou S, Stephan SA, Oishi Y, et al. Permeation and blockage of fine particles transported by updraft through a packed bed (numerical approach). ISIJ Int. 2020;60:1551–1559. DOI:https://doi.org/10.2355/isijinternational.ISIJINT-2020-108
- Qian FP, Huang NJ, Zhu XJ, et al. Numerical study of the gas–solid flow characteristic of fibrous media based on SEM using CFD–DEM. Powder Technol. 2013;249:63–70. DOI:https://doi.org/10.1016/j.powtec.2013.07.030
- Shi L, Wang QQ, Xu SL, et al. Numerical study on clogging of prefabricated vertical drain in slurry under vacuum loading. Granul Matter. 2018;20:74. DOI:https://doi.org/10.1007/s10035-018-0846-6
- Dianyu E. Validation of CFD–DEM model for iron ore reduction at particle level and parametric study. Particuology. 2020;51:163–172. DOI:https://doi.org/10.1016/j.partic.2019.10.008
- Yu Y, Zhang J, Zhang J, et al. DEM and experimental studies on pellet segregation in stockpile build-up. Ironmak Steelmak. 2018;45:264–271. DOI:https://doi.org/10.1080/03019233.2016.1261244
- Zhou H, Luo ZG, Zhang T, et al. Analyses of solid flow in COREX shaft furnace with AGD by discrete element method. Ironmak Steelmak. 2015;42:774–784. DOI:https://doi.org/10.1179/1743281215Y.0000000022
- Dodds JA. The porosity and contact points in multicomponent random sphere packings calculated by a simple statistical geometric model. J Colloid Interface Sci. 1980;77:317–327. DOI:https://doi.org/10.1016/0021-9797(80)90302-1
- Kou MY, Zhou H, Wu SL, et al. DEM simulation of cubical particle percolation in a packed bed. Powder Technol. 2019;361:306–314. DOI:https://doi.org/10.1016/j.powtec.2019.08.012
- Zhou H, Wu SL, Kou MY, et al. Discrete particle simulation of solid flow in a large-scale reduction shaft furnace with center gas supply device. ISIJ Int. 2018;58:422–430. DOI:https://doi.org/10.2355/isijinternational.isijint-2017-545
- Zhou H, Tian X, Kou MY, et al. Numerical simulation of the effect of burden profile on gas flow in a COREX shaft furnace. Powder Technol. 2020;376:537–548. DOI:https://doi.org/10.1016/j.powtec.2020.08.060
- Civan F. Reservoir formation damage—fundamentals, modeling, assessment, and mitigation, vol. 2. Amsterdam: Gulf Professional Pub. Elsevier; 2007. DOI:https://doi.org/10.1177/193758671400700305