References
- Mahdi MM. Breakout problems study of continuous casting steel. JoMME. 2012;2:1–11.
- Qian H, He F, Xie X, et al. Recovery mechanism of the sticking-type breakout during continuous casting of steel. Ironmak Steelmak. 2017;46:259–268.
- He F, He D-F, Deng Z-H, et al. Development and application of mould breakout prediction system with online thermal map for steel continuous casting. Ironmak Steelmak. 2015;42:194–208. DOI:10.1179/1743281214Y.0000000220.
- He F, Zhang L. Mold breakout prediction in slab continuous casting based on combined method of GA-BP neural network and logic rules. Int J Adv Manuf Tech. 2018;95:4081–4089. DOI:10.1007/s00170-017-1517-1.
- Liu Y, Wang X, Shi G, et al. Process factors of sticking breakout for wide and thick slab continuous casting. J Univ Sci Technol Beijing. 2014;36:757–762. DOI:10.13374/j.issn1001-053x.2014.06.008.
- Miłkowska-Piszczek K, Falkus J. Applying a numerical model of the continuous steel casting process to control the length of the liquid core in the strand. Arch Metall Mater. 2015;60:251–256. DOI:10.1515/amm-2015-0040.
- Thomas BG. Review on Modeling and simulation of continuous casting. Steel Res Int. 2018;89(1–21):1700312, DOI:10.1002/srin.201700312.
- Miłkowska-Piszczek K, Rywotycki M, Falkus J, et al. A comparison of models describing heat transfer in the primary cooling zone of a continuous casting machine. Arch Metall Mater. 2015;60:240–244. DOI:10.1515/amm-2015-0038.
- Falkus J, Miłkowska-Piszczek K, Rywotycki M, et al. The influence of the selected parameters of the mathematical model of steel continuous casting on the distribution of the solidifying strand temperature. J Achiev Mater Manuf. Eng. 2012;55:668–672.
- Malinowski Z, Telejko T, Hadała B. Influence of heat transfer boundary conditions on the temperature field of the continuous casting ingot. Arch Metall Mater. 2012;57(1):325–331. DOI:10.2478/v10172-012-0030-7.
- Meng Y, Thomas BG. Heat transfer and solidification model of continuous slab casting: CON1D. Metall Mater Trans B. 2003;34:685–705. DOI:10.1007/s11663-003-0040-y.
- Gu K, Wang W, Wei J, et al. Heat-transfer phenomena across mold flux by using the inferred emitter technique. Metall Mater Trans B. 2012;43:1393–1404. DOI:10.1007/s11663-012-9718-3.
- Falkus J. Modelling of continuous casting process of steel. Wydawnictwo Naukowe Instytutu Technologii Eksploatacji – Państwowy Instytut Badawczy; 2012.
- Raznjevic K. Thermal boards - Tablice cieplne. Warszawa: WNT; 1966.
- Thomas BG. Modeling of the continuous casting of steel—past, present, and future. Metall Mater Trans B. 2002;2002(33):795–812. DOI:10.1007/s11663-002-0063-9.
- Mishra P, Ajmani SK, Kumar A, et al. Review article on physical and numerical modelling of SEN and mould for continuous slab casting. Int J Eng Sci. 2012;4:2234–2243.
- Miłkowska-Piszczek K, Falkus J. Control and design of the steel continuous casting process based on advanced numerical models. Metals (Basel). 2018;8:1–16. DOI:10.3390/met8080591.
- ProCAST ESI Group® User Manual 2016.