References
- Moir S, Preston J. Surface defects-evolution and behaviour from cast slab to coated strip. J Mater Process Technol. 2002;125:720–724.
- Chen Y, Zeng JH, Wu GR. Control for surface faint-sliver defects in cold-rolled IF steel sheet. Adv Mat Res. 2011;396–398:1145–1150.
- Gao WF. Formation and prevention of sliver defects on the surface of cold-rolled strip. Adv Mat Res. 2011;402:221–226.
- Dumitrescu AT, Catangiu A. Sliver defects on low carbon steels, colded rolled strips. Sci Bull VALAHIA Univ Mater Mech. 2012;7(14):14–18.
- Miyake T, Morishita M, Nakata H, et al. Influence of sulphur content and molten steel flow on entrapment of bubbles to solid/liquid interface. ISIJ Int. 2006;46(12):1817–1822.
- Esaka H, Kuroda Y, Shinozuka K, et al. Interaction between argon gas bubbles and solidified shell. ISIJ Int. 2004;44(4):682–690.
- Sengupta J, Thomas BG, Shin HJ, et al. A new mechanism of hook formation during continuous casting of ultra-low-carbon steel slabs. Metall Mater Trans A. 2006;37A(5):1597–1611.
- Yamashita S, Iguchi M. Mechanism of mold powder entrapment caused by large argon bubble in continuous casting mold. ISIJ Int. 2001;41(12):1529–1531.
- Li B, Tsukihashi F. Vortexing flow patterns in a water model of slab continuous casting mold. ISIJ Int. 2005;45(1):30–36.
- Ren L, Zhang LF, Wang QQ. Measurements of surface velocity and level fluctuation in an actual continuous wide slab casting mold. Metall Res Technol. 2018;115(1):102.
- Wu GR. Effect of mold powder on faint-sliver defect in IF cold-rolled steel sheet. Adv Mater Res. 2011;339:134–139.
- Li HB, Yuan P, Chen B, et al. The influence of slag chemistry on the formation of sliver defects. Ironmak Steelmak. 2017;46(5):463–468.
- Genzano C, Madias J, Dalmaso D, et al. Elimination of surface defects in cold-rolled extra low carbon steel sheet. In: The ISS 85th steelmaking conference,; Nashville. 2002. Vol. 85, p. 325–331.
- Peng QC, Yang JL, Peng S, et al. Analysis of linear defects of cold-rolled galvanized sheet. Adv Mat Res. 2013;652–654:2034–2037.
- Ahmed R, Sutcliffe MPF. Identification of surface features on cold-rolled stainless steel strip. Wear. 2000;244(1):60–70.
- Dhua SK. Metallurgical analyses of surface defects in cold-rolled steel sheets. J Fail Anal Prev. 2019;19(4):1023–1033.
- Leao PBP, Klug JL, De Abreu HFG, et al. Sliver defects in an ultra-low carbon Al-killed steel caused by low steel level in the tundish. Ironmak Steelmak. 2020;48:978–985.
- Yu HX, Ji CX, Chen B, et al. Characteristics and evolution of inclusion induced surface defects of cold rolled IF sheet. J Iron Steel Res Int. 2015;22:17–23.
- Cao SQ, Zhang JX, Wu JS, et al. Analysis of orange peel defect in St14 steel sheet by electron backscattered diffraction (EBSD). J Mater Sci Technol. 2005;21(1):17–20.
- Ji SK, Chen JG, Mi XC, et al. Analysis of fleck defect on surface of galvanized sheet. Iron Steel. 2006;02:67–71.
- Pan XQ, Yang J, Park J, et al. Distribution characteristics of inclusions along with the surface sliver defect on the exposed panel of automobile: a quantitative electrolysis method. Int J Miner Metall Mater. 2020;27(11):1489–1498.
- Wang JJ, Zhang LF, Chen W, et al. Kinetic model of the composition transformation of slag inclusions in molten steel in continuous casting mold. Chin J Eng. 2021;43(06):786–796.