Transformation of inclusions in Al-killed steels with different calcium contents during the heat treatment

References

• Atkinson H, Shi G. Characterization of inclusions in clean steels: a review including the statistics of extremes methods. Prog Mater Sci. 2003;48:457–520.
   Web of Science ®Google Scholar
• Zhang L, Thomas BG. State of the art in evaluation and control of steel cleanliness. ISIJ Int. 2003;43:271–291.
   Web of Science ®Google Scholar
• Zhang L, Thomas BG. State of the art in the control of inclusions during steel ingot casting. Metall Trans B. 2006;37:733–761.
   Web of Science ®Google Scholar
• Zhang: L. State of the art in the control of inclusions in tire cord steels - a review. Steel Res Int. 2006;77:158–169.
   Web of Science ®Google Scholar
• Yang W, Zhang Y, Zhang L, et al. Population evolution of oxide inclusions in Ti-stabilized ultra-low carbon steels after deoxidation. J Iron Steel Res Int. 2015;22:1069–1077.
   Web of Science ®Google Scholar
• Pan X, Yang J, Park J, et al. Distribution characteristics of inclusions along with the surface sliver defect on the exposed panel of automobile: a quantitative electrolysis method. Int J Miner Metall Mater. 2020;27:1489–1498.
   Web of Science ®Google Scholar
• Wang H, Bao Y, Zhao M, et al. Effect of Ce on the cleanliness, microstructure and mechanical properties of high strength low alloy steel Q690E in industrial production process. Int J Miner Metall Mater. 2019;26:1372–1384.
   Web of Science ®Google Scholar
• Wang R, Bao Y, Li Y, et al. Influence of metallurgical processing parameters on defects in cold-rolled steel sheet caused by inclusions. Int J Miner Metall Mater. 2019;26:440–446.
   Web of Science ®Google Scholar
• Gu C, Bao Y, Gan P, et al. Effect of main inclusions on crack initiation in bearing steel in the very high cycle fatigue regime. Int J Miner Metall Mater. 2018;25:623–629.
   Web of Science ®Google Scholar
• Shi W, Yang S, Li J. Effect of nonmetallic inclusions on localized corrosion of spring steel. Int J Miner Metall Mater. 2021;28:390–398.
   Web of Science ®Google Scholar
• Ai K, Xie J, Zeng Z, et al. Effect of Mg on microstructure and sulfide in non-quenched and tempered steel. J. Iron Steel Res. 2019;31:361–367.
   Google Scholar
• Li M, Liu Y, Zhang L. Effect of reoxidation on inclusions in steel during calcium treatment. Metall Res Technol. 2019;116:206–214.
   Web of Science ®Google Scholar
• Zhang L, Liu Y, Zhang Y, et al. Transient evolution of nonmetallic inclusions during calcium treatment of molten steel. Metall Trans B. 2018;49:1841–1859.
   Web of Science ®Google Scholar
• Xu J, Huang F, Wang X. Formation mechanism of CaS-Al2O3 inclusions in low sulfur Al-killed steel after calcium treatment. Metall Trans B. 2016;47:1217–1227.
   Web of Science ®Google Scholar
• Sasai K, Mizukami Y. Reoxidation behavior of molten steel in tundish. ISIJ Int. 2000;40:40–47.
   Web of Science ®Google Scholar
• Hou Z, Jiang M, Yang E, et al. Inclusion characterization in aluminum-deoxidized special steel with certain sulfur content under combined influences of slag refining, calcium treatment, and reoxidation. Metall Trans B. 2018;49:3056–3066.
   Web of Science ®Google Scholar
• Zhang L, Thomas BG. 7th European electric steelmaking conference; Venice, Italy, 2002, 2.77-86.
   Google Scholar
• Yang W, Zhang L, Wang X, et al. Characteristics of inclusions in low carbon al-killed steel during ladle furnace refining and calcium treatment. ISIJ Int. 2013;53:1401–1410.
   Web of Science ®Google Scholar
• Ren Y, Zhang L, Ling H, et al. A reaction model for prediction of inclusion evolution during reoxidation of Ca-treated Al-killed steels in tundish. Metall Mater Trans B. 2017;48:1433–1438.
   Web of Science ®Google Scholar
• Hu Y, Chen WQ, Han HB, et al. Influence of calcium treatment on cleanness and fatigue life of 60Si2MnA spring steel. Ironmak Steelmak. 2016;44:28–35.
   Web of Science ®Google Scholar
• Zhang L. Non-metallic inclusions in steels: Industrial practice (in Chinese). Beijing: Metallurgical Industry Press; 2020.
   Google Scholar
• Zhang L. Non-metallic inclusions in steels: fundamentals (in Chinese). Beijing: Metallurgical Industry Press; 2019.
   Google Scholar
• Holappa L, Hämäläinen M, Liukkonen M, et al. Thermodynamic examination of inclusion modification and precipitation from calcium treatment to solidified steel. Ironmak Steelmak. 2003;30:111–115.
   Web of Science ®Google Scholar
• Bielefeldt WV, Vilela ACF. Study of inclusions in high sulfur, Al-killed Ca-treated steel via experiments and thermodynamic calculations. Steel Res Int. 2015;86:375–385.
   Web of Science ®Google Scholar
• Bielefelds WV, Vilela ACF, Moraes CAM, et al. Computational thermodynamics application on the calcium inclusion treatment of SAE 8620 steel. Steel Res Int. 2007;78:857–862.
   Web of Science ®Google Scholar
• Liu Y, Zhang L, Zhang Y, et al. Effect of sulfur in steel on transient evolution of inclusions during calcium treatment. Metall Trans B. 2018;49:610–626.
   Web of Science ®Google Scholar
• Pan C, Hu X, Zheng J, et al. Effect of calcium content on inclusions during the ladle furnace refining process of AISI 321 stainless steel. Int J Miner Metall Mater. 2020;27:1499–1507.
   Web of Science ®Google Scholar
• Bai X, Sun Y, Chen R, et al. Formation and thermodynamics of CaS-bearing inclusions during Ca treatment in oil casting steels. Int J Miner Metall Mater. 2019;26:573–587.
   Web of Science ®Google Scholar
• Zhu C, Huang L, Luo X, et al. Effect of calcium treatment on characteristics of inclusions in finished non-oriented silicon steel. J. Iron Steel Res. 2020;32:117–128.
   Google Scholar
• Meng Y, Zhao H, Teng Y, et al. Influence of calcium treatment on oxide inclusions in Si-killed spring steel 55SiCr. J. Iron Steel Res. 2019;31:538–546.
   Google Scholar
• Ren Y, Zhang L, Pistorius PC. Transformation of oxide inclusions in type 304 stainless steels during heat treatment. Metall Trans B. 2017;48:2281–2292.
   Web of Science ®Google Scholar
• Wang J, Li W, Ren Y, et al. Thermodynamic and kinetic analysis for transformation of oxide inclusions in solid 304 stainless steels. Steel Res Int. 2019;90:1800600.
   Web of Science ®Google Scholar
• Wang Q, Zou X, Matsuura H, et al. Evolution of inclusions during the 1473 K (1200 °C) heating process of EH36 shipbuilding steel. Metall Trans B. 2018;49:18–22.
   Web of Science ®Google Scholar
• Cheng G, Li W, Zhang X, et al. Transformation of inclusions in solid GCr15 bearing steels during heat treatment. Metals. 2019;9:642–662.
   Web of Science ®Google Scholar
• Ren Q, Yang W, Cheng L, et al. Formation and deformation mechanism of Al2O3-CaS inclusions in Ca-treated non-oriented electrical steels. Metall Trans B. 2020;51:200–212.
   Web of Science ®Google Scholar
• Dioubaté D, Li W, Ren Y, et al. Transfomation of non-metallic inclusions in solid steel during heating process. J Iron Steel Res. 2020;32:1021–1028.
   Google Scholar
• Harada A, Maruoka N, Shibata H, et al. A kinetic model to predict the compositions of metal, slag and inclusions during ladle refining: part 1. Basic concept and application. ISIJ Int. 2013;53:2110–2117.
   Web of Science ®Google Scholar
• Harada A, Maruoka N, Shibata H, et al. A kinetic model to predict the compositions of metal, slag and inclusions during ladle refining: part 2. Condition to control the inclusion composition. ISIJ Int. 2013;53:2118–2125.
   Web of Science ®Google Scholar
• Scheller PR, Shu Q. Inclusion development in steel during ladle metallurgical treatment - a process simulation model - part: industrial validation. Steel Res Int. 2014;85:1310–1316.
   Web of Science ®Google Scholar
• Ye G, Jönsson P, Lund T. Thermodynamics and kinetics of the modification of Al2O3 inclusions. ISIJ Int. 1996;36:S105–SS08.
   Google Scholar
• Han Z, Liu L, Lind M, et al. Mechanism and kinetics of transformation of alumina inclusions by calcium treatment. Acta Metall Sin. (Engl Lett). 2006;19:1–8.
   Google Scholar
• Roy D, Pistorius PC, Fruehan RJ. Effect of silicon on the desulfurization of Al-killed steels: part I. Mathematical model. Metall Trans B. 2013;44:1086–1094.
   Web of Science ®Google Scholar
• Roy D, Pistorius PC, Fruehan RJ. Effect of silicon on the desulfurization of Al-killed steels: part II. Experimental results and plant trials. Metall Trans B. 2013;44:1095–1104.
   Web of Science ®Google Scholar
• Chen X, Cheng G, Hui K, et al. J. Iron Steel Res. 2019;31:452–459.
   Google Scholar
• Yang W, Guo C, Li C, et al. Transformation of inclusions in pipeline steels during solidification and cooling. Metall Trans B. 2017;48:2267–2273.
   Web of Science ®Google Scholar
• Wang Y, Sridhar S, Valdez M. Formation of CaS on Al2O3-CaO inclusions during solidification of steels. Metall Trans B. 2002;33:625–632.
   Web of Science ®Google Scholar
• Chu Y, Li W, Ren Y, et al. Transformation of inclusions in linepipe steels during heat treatment. Metall Trans B. 2019;50:1–16.
   Web of Science ®Google Scholar
• Zou X, Matsuura H, Wang C. Quantifying MnS inclusion evolution behaviors during 1473 K heating in EH36 shipbuilding steel with Zr addition. Metall Trans B. 2019;50:1134–1138.
   Web of Science ®Google Scholar
• Zhang X, Yang S, Liu C, et al. Interfacial reaction between oxide inclusion and steel matrix deoxidized by Si and Mn at 1473 K. J. Iron Steel Res Int. 2018;25:1–8.
   Web of Science ®Google Scholar
• Shen Y, Matsuura H, Wang C. Evolution of carbide precipitates in 1.25Cr-0.5Mo steel during simulated postweld heat treatment. Metall Trans A. 2018;49:4413–4418.
   Web of Science ®Google Scholar
• Liu C, Kim K-H, Kim S-J, et al. Reaction between MnO-SiO2-FeO solid oxide and solid steel deoxidized by Si and Mn during heat treatment at 1473 K (1200 °C). Metall Trans B. 2015;46:1875–1884.
   Web of Science ®Google Scholar
• Shibata H, Tanaka T, Kimura K, et al. Composition change in oxide inclusions of stainless steel by heat treatment. Ironmak Steelmak. 2010;37:522–528.
   Web of Science ®Google Scholar
• Shibata H, Kimura K, Tanaka T, et al. Mechanism of change in chemical composition of oxide Inclusions in Fe–Cr alloys deoxidized with Mn and Si by heat treatment at 1473 K. ISIJ Int. 2011;51:1944–1950.
   Web of Science ®Google Scholar
• Takano K, Nakao R, Fukumoto S, et al. Grain size control by oxide dispersion in austenitic stainless steel. Tetsu-to-Hagane. 2003;89:616–622.
   Web of Science ®Google Scholar
• Takahashi I, Sakae T, Yoshida T. The creep rupture properties of high tensile strength structural steels. Tetsu-to-Hagane. 1967;53:350–352.
   Google Scholar
• Shao X, Wang X, Ji C, et al. Morphology, size and distribution of MnS inclusions in non-quenched and tempered steel during heat treatment. Int J Miner Metall Mater. 2015;22:483–491.
   Web of Science ®Google Scholar
• Lei H, Nakajima K, He JC. Mathematical model for nucleation, Ostwald ripening and growth of inclusion in molten steel. ISIJ Int. 2010;50:1735–1745.
   Web of Science ®Google Scholar
• Liu Z, Wei J, Cai K. A coupled mathematical model of microsegregation and inclusion precipitation during solidification of silicon steel. ISIJ Int. 2002;42:958–963.
   Web of Science ®Google Scholar
• Shin JH, Park JH. Prediction of inclusion evolution during refining and solidification of steel: computational simulation and experimental confirmation. Metall Trans B. 2020;51:1211–1224.
   Web of Science ®Google Scholar