References
- Heimann RB. Classic and advanced ceramics: from fundamentals to applications. Wiley-VCH; 2010. p. 76–81.
- Allendorf MD, Spearb KE. Thermodynamic analysis of silica refractory corrosion in glass-melting furnaces. J. Electrochem. Soc. 2001;148(2):B59–B67.
- Li SP, Zhang HM, et al. Research progress and application of silica brick. Refractories. 2015;49(3):238–240.
- Matsumura I, Hayashi Y, Hiyama Y, et al. Refractoriness under load and hot creep measurements. Taikabutsu Overseas. 1990;2(2):36–42.
- Chokshi AH. Diffusion creep in oxide ceramics. J. Eur. Ceram. Soc. 2002;22(14):2469–2478.
- Bakunov VS, Belyakov AV. Creep in Ceramics and Refractories. Glass Ceram. 2003;60(9–10):326–331.
- Jin SL, Harmuth H, Gruber D. Compressive creep testing of refractories at elevated loads—Device, material law and evaluation techniques. J. Eur. Ceram. Soc. 2014;34(15):4037–4042.
- GB/T 5073-2005. Test method for compressive creep of refractories (in Chinese).
- EN 993-9. Methods of test for dense shaped refractory products, determination of creep in compression. In: Standard test measurement. Bruxelles: CEN; 1997.
- ISO 3187. Refractory products, determination of creep in compression. In: Standard test measurement. Genève: ISO; 1989.
- Zhang XH, Li Y, Tian ZH, et al. Evaluation of Creep Results of Silica Brick by Creep Test Method. J. Chin. Ceram. Soc. 2020;48(09):1505–1510.
- Pabst W, Gregorová E. Elastic properties of silica polymorphs – a review. Ceram. Silikáty. 2013;57(3):167–184.
- Tse JS, Klug DD. Structure and dynamics of silica polymorphs using a two-body effective potential model. J. Chem. Phys. 1991;95(12):9176–9185.
- Yan XM, et al. Coke Oven Technology and Prospect (in Chinese), 1981.
- Andreev K, Tadaion V, Zhu Q, et al. Thermal and mechanical cyclic tests and fracture mechanics parameters as indicators of thermal shock resistance – case study on silica refractories. J. Eur. Ceram. Soc. 2019;39(4):1650–1659.
- Tang B, Gao S, Wang Y, et al. Pore structure analysis of electrolytic manganese residue based permeable brick by using industrial CT. Construct. Build. Mater. 2019;208:697–709.
- Pagliari L, Dapiaggi M, Pavese A, et al. A kinetic study of the quartz-cristobalite phase transition. J. Eur. Ceram. Soc. 2013;33:3403–3410.
- Dapiaggi M, Pagliari L, Pavese A, et al. The formation of silica high temperature polymorphs from quartz: influence of grain size and mineralizing agents. J. Eur. Ceram. Soc. 2015;35:4547–4555.
- Gregorová E, Pabst W, Diblíková P, et al. Temperature dependence of damping in silica refractories measured via the impulse excitation technique. Ceram. Int. 2018;44(7):8363–8373.
- Dai YJ, Yin YC, Xu XF, et al. Effect of the phase transformation on fracture behavior of fused silica refractories. J. Eur. Ceram. Soc. 2018;38(16):5601–5609.
- Andreev K, Shetty N, Verstrynge E. Acoustic based emission damage limits and their correlation with fatigue resistance of refractory masonry. Constr. Build. Mater. 2018;165:639–646.
- Fan JH, Li Y, Gao Y, et al. Evaluation of the morphology and pore characteristics of silica refractory using X-ray computed tomography. Ceram. Int. 2021;47:18084–18093.
- Li Y, Jun B, Zhang JF, et al. Development of nonoxide composite refractories for large blast furnaces change and performance. China's Refractories. 2009;43(2):140–144.
- Majdic A, Hagemann L, Maercker G, et al. Thermal expansion of silica bricks for coke oven construction. Keram. Z. 1982;34:89–92.
- Pilate P, Lardot V, Cambier F, et al. Contribution to the understanding of the high temperature behavior and of the compressive creep behavior of silica refractory materials. J. Eur. Ceram. Soc. 2015;35(2):813–822.
- Xing DM, Li Y, Zhang XH, et al. Structural evolution of tridymite in silica brick used in high temperature zone of hot bast stove. J. Chin. Ceram. Soc. 2019;12:1818–1824.