Publication Cover
Ironmaking & Steelmaking
Processes, Products and Applications
Volume 49, 2022 - Issue 7
257
Views
0
CrossRef citations to date
0
Altmetric
Articles

Water modelling on particle dispersion during KR desulphurization process

, , , &
Pages 707-715 | Received 23 Dec 2021, Accepted 01 Feb 2022, Published online: 20 Feb 2022

References

  • Feng K, Xu A, He D, et al. Case-based reasoning method based on mechanistic model correction for predicting endpoint sulphur content of molten iron in KR desulphurization. Ironmak Steelmak. 2020;47:799–806.
  • Schrama FNH, Beunder EM, Van den Berg B, et al. Sulphur removal in ironmaking and oxygen steelmaking. Ironmak Steelmak. 2017;44:333–343.
  • Visuri VV, Vuolio T, Haas T, et al. A review of modeling hot metal desulfurization. Steel Res Int. 2020;91:1900454.
  • Ji J, Liang R, He J. Simulation on mixing behavior of desulfurizer and high-sulfur hot metal based on variable-velocity stirring. ISIJ Int. 2016;56:794–802.
  • Vinoo DS, Mazumdar D, Gupta SS. Optimisation and prediction model of hot metal desulphurisation reagent consumption. Ironmak Steelmak. 2007;34:471–476.
  • Vuolio T, Visuri VV, Sorsa A, et al. Genetic algorithm-based variable selection in prediction of hot metal desulfurization kinetics. Steel Res Int. 2019;90:1900090.
  • Nakai Y, Sumi I, Matsuno H, et al. Effect of flux dispersion behavior on desulfurization of hot metal. ISIJ Int. 2010;50:403.
  • Cepeda Rodríguez Y, González Múzquiz G, Parga Torres JR et al. Mathematical model of hot metal desulfurization by powder injection. Adv Mater Sci Eng. 2012;2012:969727.
  • Shiba R, Uddin MA, Kato Y. Solid/liquid mixing pattern and its comparison with liquid/liquid one in a mechanically-stirred vessel. Tetsu-to-Hagané. 2016;102:196–201.
  • Horiuchi S, Uddin MA, Kato Y, et al. Liquid/liquid mixing pattern in a mechanically-stirred vessel. ISIJ Int. 2014;54:82–86.
  • Liu Y, Sano M, Zhang T, et al. Intensification of bubble disintegration and dispersion by mechanical stirring in gas injection refining. ISIJ Int. 2009;49:17–23.
  • Li M, Tan Y, Liu Y, et al. Effects of geometrical and physical factors on light particles dispersion by agitation characteristic curve. Chin J Chem Eng. 2019;27:2313–2324.
  • Pirker S, Gittler P, Pirker H, et al. CFD, a design tool for a new hot metal desulfurization technology. Appl Math Model. 2002;26:337–350.
  • Zou Z, Zou Y, Zhang L, et al. Mathematical model of hot metal desulphurization by powder injection. ISIJ Int. 2001;41:S66–S69.
  • Huang A, Zhang MJ, Gu HZ. Simulation and optimization of melted iron desulfurization process in torpedo with blowing gas and spray. Adv Mat Res. Trans Tech Publ, 2012;462:413–418.
  • He M, Wang N, Chen M, et al. Distribution and motion behavior of desulfurizer particles in hot metal with mechanical stirring. Powder Technol. 2020;361:455–461.
  • Liang RQ, Ji JH, Yan FS, et al. Numerical study on flow characteristics in a stirring vessel. Appl Mech Mater. Trans Tech Publ, 2012;130:3050–3053.
  • Nakai Y, Sumi I, Kikuchi N, et al. Aggregation behavior of desulfurization Flux in Hot Metal desulfurization with mechanical stirring. ISIJ Int. 2013;53:1411–1419.
  • Ji J, Du H, Jiang Y, et al. Effect of impellers on particle mixing behaviour in KR desulphurization process. Ironmak Steelmak. 2021. doi:10.1080/03019233.2021.1972740.
  • Ji J, Liang R, He J. Numerical simulation on bubble behavior of disintegration and dispersion in stirring-injection magnesium desulfurization process. ISIJ Int. 2017;57:453–462.
  • Lee Y, Yi K. Improvement of desulfurization efficiency via numerical simulation analysis of transport phenomena of Kanbara Reactor process. Met Mater Int. 2021. doi:10.1007/s12540-021-00973-0.
  • Kuroyanagi S, Yamamoto N, Iba A, et al. Effect of baffles on the mixing of liquid and particles in a mechanically stirred vessel. Tetsu-to-Hagané. 2004;90:329–333.
  • Ito K, Yamamoto N, Kuranaga S. The evaluation of the mixing properties of the mechanically stirred cylindrical vessel. ISIJ Int. 2006;46:1791–1794.
  • Khazam O, Kresta SM. Mechanisms of solids drawdown in stirred tanks. Can J Chem Eng. 2008;86:622–634.
  • Nomura T, Iguchi M. Effects of mechanical offset agitation on dispersion of Low density particles in cylindrical bath. Tetsu-to-Hagané. 2002;88:1–7.
  • Matsui A, Nakai Y, Kikuchi N, et al. Effect of bottom inclination vessel on particle entrainment behavior with mechanical stirrin. Tetsu-to-Hagané. 2013;99:458–467.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.