References
- Bastos IN, Tavares SSM, Dalard F, et al. Effect of microstructure on corrosion behavior of superduplex stainless steel at critical environment conditions. Scr Mater. 2007;57:913–916.
- Gao Z, Li J, Wang Y. The crystallographic textures and anisotropy in 2507 super duplex stainless steel. Steel Res Int. 2019;90(2):1800397.
- Toor IUH, Hyun PJ, Kwon HS. Development of high Mn–N duplex stainless steel for automobile structural components. Corros Sci. 2008;50:404–410.
- Cao WQ, Wang C, Shi J, et al. Microstructure and mechanical properties of Fe–0.2C–5Mn steel processed by ART-annealing. Mater Sci Eng A. 2011;528(22):6661.
- Zhang R, Cao WQ, Peng ZJ, et al. Intercritical rolling induced ultrafine microstructure and excellent mechanical properties of the medium-Mn steel. Mater Sci Eng A. 2013;583:84–88.
- Liu L, Yu Q, Wang Z, et al. Making ultrastrong steel tough by grain-boundary delamination. Science. 2020;368:1347–1352.
- Zhang QR, Li JY, Chen YL, et al. Effect of Ce on thermo-plasticity of lean duplex stainless steel. Ironmak Steelmak. 2020;10:1–7.
- Feng ZH, Li JY, Wang YD. The microstructure evolution of lean duplex stainless steel 2101. Steel Res Int. 2017;88:1700177.
- Ran Q, Xu Y, Li J, et al. Effect of heat treatment on transformation-induced plasticity of economical Cr19 duplex stainless steel. Mater Design. 2014;56:959–965.
- Moallemi M, Zarei-Hanzaki A, Kim SJ, et al. On the microstructural-textural characterization and deformation analysis of a nano/ultrafine grained Fe-20Cr-8Mn-0.3N duplex alloy with superior mechanical properties. Mater Charct. 2019;156:109878.
- Saenarjhan N, Kang JH, Lee SC, et al. Influence of annealing temperature on deformation behavior of 329LA lean duplex stainless steel. Mater Sci Eng A. 2017;679:531–537.
- Limmer KR, Medvedeva JE, Van Aken DC, et al. Ab initio simulation of alloying effect on stacking fault energy in fcc Fe. Comp Mater Sci. 2015;99:253–255.
- Limmer KR. First-principles investigations of iron-based alloys and their properties. 2014.
- De Cooman BC, Estrin Y, Kim SK. Twinning-induced plasticity (TWIP) steels. Acta Mater. 2017;142:283–362.
- Park YH, Kim JW, Kim SK, et al. The critical amount of nitrogen on the formation of nitrogen gas pores during solidification of 25Cr-7Ni duplex stainless steels. Metall Mater Trans B. 2003;34(3):313–320.
- Merello R, Botana FJ, Botella J, et al. Influence of chemical composition on the pitting corrosion resistance of non-standard low-Ni high-Mn–N duplex stainless steels. Corros Sci. 2003;45(5):909–921.
- Lee SJ, Jung YS, Baik SI, et al. The effect of nitrogen on the stacking fault energy in Fe–15Mn–2Cr–0.6 C–xN twinning-induced plasticity steels. Scr Mater. 2014;92:23–26.
- Leban MB, Tisu R. The effect of TiN inclusions and deformation-induced martensite on the corrosion properties of AISI 321 stainless steel. Eng Fail Anal. 2013;33:430–438.
- Dehghan-Manshadi A, Barnett MR, Hodgson PD. Microstructural evolution during hot deformation of duplex stainless steel. Mater Sci Tech-Lond. 2007;23(12):1478–1484.
- Ebrahimian A, Banadkouki SSG. Effect of alloying element partitioning on ferrite hardening in a low alloy ferrite-martensite dual phase steel. Mater Sci Eng A. 2016;677:281–289.
- Herrera C, Ponge D, Raabe D. Design of a novel Mn-based 1 GPa duplex stainless TRIP steel with 60% ductility by a reduction of austenite stability. Acta Mater. 2011;59(11):4653–4664.
- Lee YK, Choi C. Driving force for γ→ ϵ martensitic transformation and stacking fault energy of γ in Fe-Mn binary system. Metall Mater Trans A. 2000;31(2):355–360.
- Duprez L, De Cooman BC, Akdut N. Deformation behaviour of duplex stainless steel during industrial hot rolling. Steel Res. Int. 2002;73(12):531–538.
- Zhang Q, Li J, Chen Y, et al. Effect of solution temperature on cold rolling properties of lean duplex stainless steel. Steel Res. Int. 2021;92:2000612.