Effect of retained austenite on the microstructure and mechanical properties of cold-rolled medium-manganese Q&P steel

References

• Hu Z, Xu Y, Liu H, et al. Microstructure evolution and mechanical properties of cold-rolled Mn-Al TRIP steel with δ ferrite. Chin J Mater Res. 2018;32:177–183.
   Google Scholar
• Shao C, Hui W, Zhang Y, et al. Microstructure and mechanical properties of hot-rolled medium-Mn steel containing 3% aluminum. Mat Sci Eng A Struc. 2017;682:45–53.
   Web of Science ®Google Scholar
• Cai ZH, Ding H, Kamoutsi H, et al. Interplay between deformation behavior and mechanical properties of intercritically annealed and tempered medium-manganese transformation-induced plasticity steel. Mat Sci Eng A Struc. 2016;654:359–367.
   Web of Science ®Google Scholar
• Cai M, Huang H, Su J, et al. Enhanced tensile properties of a reversion annealed 6.5Mn-TRIP alloy via tailoring initial microstructure and cold rolling reduction. J Mater Sci Technol. 2017;34:1428–1435.
   Google Scholar
• Lee SJ, Lee S, De Cooman BC. Martensite transformation of sub-micron retained austenite in ultra-fine grained manganese transformation-induced plasticity steel. Int J Mater Res. 2013;104:423–429.
   Web of Science ®Google Scholar
• Jung YS, Lee YK, Matlock DK, et al. Effect of grain size on strain-induced martensitic transformation start temperature in an ultrafine grained metastable austenitic steel. Met Mater Int. 2011;17:553–556.
   Web of Science ®Google Scholar
• Chiang J, Lawrence B, Boyd JD, et al. Effect of microstructure on retained austenite stability and work hardening of TRIP steels. Mat Sci Eng A Struct. 2011;528:4516–4521.
   Web of Science ®Google Scholar
• Jacques PJ, Delannay F, Ladriere J. On the influence of interactions between phases on the mechanical stability of retained austenite in transformation-induced plasticity multiphase steels. Metall Mater Trans A. 2001;32:2759–2768.
   Web of Science ®Google Scholar
• Speer J, Matlock DK, De Cooman BC, et al. Quenching and partitioning: a fundamentally new process to create high strength trip sheet microstructures. Acta Mater. 2003;51:2611–2622.
   Web of Science ®Google Scholar
• Seo EJ, Lawrence C, De Coomanet BC. Application of quenching and partitioning processing to medium Mn steel. Metall Mater Trans A. 2015;46:27–31.
   Web of Science ®Google Scholar
• Jirkova H, Kuc erova L, Pru cha V, et al. Effect of advanced thermomechanical treatment on mechanical properties of low alloyed high strength steels. Metall Mater. 2012:532–538.
   Google Scholar
• De Moor E, Speer JG, Matlock DK, et al. Effect of carbon and manganese on the quenching and partitioning response of CMnSi steels. ISIJ Int. 2011;51:137–144.
   Web of Science ®Google Scholar
• Xu YB, Hu ZP, Ying Z, et al. Effect of two-step intercritical annealing on microstructure and mechanical properties of hot-rolled medium manganese TRIP steel containing δ-ferrite. Mat Sci Eng A Struc. 2017;688:40–55.
   Google Scholar
• Li JJ, Song RB, Li X, et al. Microstructural evolution and tensile properties of 70GPa·% grade strong and ductile hot-rolled 6Mn steel treated by intercritical annealing. Mat Sci Eng A Struct. 2019;745:212–220.
   Web of Science ®Google Scholar
• Zhang Y, Wang JJ, Xie Z, et al. Microstructural characteristics and tensile behavior of a hot-rolled medium-Mn steel (0.25C-8.5Mn-0.5Si-2.5Al) processed by intercritical annealing treatment. J Mater Eng Perform. 2020;29:1–12.
   Google Scholar
• Cai ZH, Ding H, Misra RDK, et al. Austenite stability and deformation behavior in a cold-rolled transformation-induced plasticity steel with medium manganese content. Acta Mater. 2015;84:229–236.
   Web of Science ®Google Scholar
• Zhao H, Shi J, Li N, et al. Influence of Si on the organization and properties of quenching and partitioning of medium Mn steels. Chin J Mater Res. 2011;25:45–50.
   Google Scholar
• Zhu S, Kang YL, Li SC, et al. Effect of partitioning temperature on microstructure and mechanical properties of Q&P steel. Hot Work Technol. 2011;24:176–178.
   Google Scholar
• Sourmail T, Caballero FG, Moudian F, et al. High hardness and retained austenite stability in Si-bearing hypereutectoid steel through new heat treatment design principles. Mater Design. 2018;142:279–287.
   Google Scholar
• Quidort D, Bréchet Y. The role of carbon on the kinetics of bainite transformation in steels. Scripta Mater. 2002;47:151–156.
   Web of Science ®Google Scholar
• Yin HX, Zhao AM, Zhao ZZ, et al. Mater Sci Technol. 2014;22:11–15.
   Google Scholar
• Hu B, Luo HW. A strong and ductile 7Mn steel manufactured by warm rolling and exhibiting both transformation and twinning induced plasticity. Alloys Compd. 2017;725:684.
   Web of Science ®Google Scholar
• Li ZC, Misra RDK, Cai ZH, et al. Mechanical properties and deformation behavior in hot-rolled 0.2C-1.5/3Al-8.5Mn-Fe TRIP steel: the discontinuous TRIP effect. Mat Sci Eng A Struc. 2016;673:63–72.
   Web of Science ®Google Scholar
• Santofimia MJ, Zhao L, Petrov R, et al. Microstructural development during the quenching and partitioning process in a newly designed low-carbon steel. Acta Mater. 2011;59:6059–6068.
   Web of Science ®Google Scholar
• Lu J, Hao Y, Kang P, et al. Study of microstructure, mechanical properties and impact-abrasive wear behavior of medium-carbon steel treated by quenching and partitioning (Q&P) process. Wear. 2018;414-415:21–30.
   Web of Science ®Google Scholar
• Liu L, He BB, Cheng GJ, et al. Optimum properties of quenching and partitioning steels achieved by balancing fraction and stability of retained austenite. Scripta Mater. 2018;150:1–6.
   Web of Science ®Google Scholar
• Zhang XL, Hou HF, Liu T, et al. Mechanical properties of a new product of strength and elongation heterogeneous cold-rolled medium manganese steel. Chin J Mater Res. 2019;33:927–934.
   Google Scholar
• Liu BG, Li W, Lu XW, et al. The effect of retained austenite stability on impact-abrasion wear resistance in carbide-free bainitic steels. Wear. 2019;428–429:127–136.
   Web of Science ®Google Scholar
• Wu X, Zhu Y. Heterogeneous materials: a new class of materials with unprecedented mechanical properties. Materials Research Letters. 2021;5:527–523.
   Google Scholar
• Wang S, Li J, Cao Y, et al. Thermal stability and tensile property of 316L stainless steel with heterogeneous lamella structure. Vacuum. 2018;152:261–264.
   Google Scholar
• Tsukatani I, Hashimoto S, Inoue T. Effects of silicon and manganese addition on mechanical properties of high-strength hot-rolled sheet steel containing retained austenite. ISIJ Int. 1991;31:992–1000.
   Web of Science ®Google Scholar
• Wang T, Hu J, Misra RDK. Microstructure evolution and strain behavior of a medium Mn TRIP/TWIP steel for excellent combination of strength and ductility. Mat Sci Eng A Struct. 2019;753:99–108.
   Google Scholar