References
- Zhou T, Overby D, Badgley P, et al. Study of processing, microstructure and mechanical properties of hot rolled ultra-high strength steel. Ironmak Steelmak. 2019;46(6):535–541.
- Hutchinson B, Siwecki T, Komenda J. New vanadium-microalloyed bainitic 700 MPa strip steel product. Ironmak Steelmak. 2014;41(1):1–6.
- Sharma AK, Sharma HK. Cooling rate and micro-structural characteristic evaluation of HSLA steel. IOP Conf Ser Mater Sci Eng. 2021;1116(1):012028.
- Bharadwaj R, Prasad MJNV, Sam S, et al. Effect of hot rolling reduction on dynamic recrystallization of Nb–V bearing HSLA steel: physical simulation and microtexture evolution. Trans Indian Inst Met. 2020;73(11):2919–2930.
- Gadala MS, Xu F. Study on the 2-D simulation of the cooling process of steel strips on a run-out table. Numer Heat Tr A Appl. 2010;58(1):1–19.
- Yang JH, Lee SJ, Eum SS, et al. Development of a system for the control of the transverse temperature profile of strips in hot strip mills. Rev Metall Paris. 1996;93(10):1257–1264.
- Wang S-C, Chiu F-J, Ho T-Y. Characteristics and prevention of thermomechanical controlled process plate deflection resulting from uneven cooling. Mater Sci Tech Lond. 1996;12(1):64–71.
- Witek S, Milenin A. Numerical analysis of temperature and residual stresses in hot-rolled steel strip during cooling in coils. Arch Civ Mech Eng. 2018;18(2):659–668.
- Wang X, Li F, Yang Q, et al. FEM analysis for residual stress prediction in hot rolled steel strip during the run-out table cooling. Appl Math Model. 2013;37(1-2):586–609.
- Wang X, Yang Q, He A. Calculation of thermal stress affecting strip flatness change during run-out table cooling in hot steel strip rolling. J Mater Process Tech. 2008;207(1-3):130–146.
- Wang D-A, Lo W, Hwu Y-J. Finite element analyses of TMCP steel plates with consideration of edge masking. Proc Eng. 2013;1:762–767.
- Hagmann R, Frenyo V. Advanced revamp concepts and technologies for hot strip production. Rev Metall Paris. 2004;101(10):817–821.
- Qiu Z, He A, Shao J, et al. Reduction of residual stress for high-strength Low-alloy steel strip based on finite element analysis. Adv Mater Sci Eng. 2018;2018:1–13.
- Tang D, Liu X, Peng L. Development of software for calculating temperature field by FEM simulation to Hot strip mill. Adv Mater Res. 2012;421:164–168.
- Peregrina S, García Redondo J-M, Fdz Quiroga P. Hot strip flatness optimization by means of edge masking in the ROT. Rev Metall Paris. 2006;103(9):381–387.
- Liu X, Dong F, Wang D. Effect of edge masking on residual stress of Hot-rolled strip on Run-out table. Adv Mater Res. 2015;1095:732–735.
- Jing-Shiang S, Yih-Fong T, Jin-Bin Y. Principal component analysis for multiple quality characteristics optimization of metal inert gas welding aluminum foam plate. Mater Des. 2011;32(3):1253–1261.
- Fung C-P, Kang P-C. Multi-response optimization in friction properties of PBT composites using taguchi method and principle component analysis. J Mater Process Tech. 2005;170(3):602–610.
- George L, Hrubiak R, Rajan K, et al. Principal component analysis on properties of binary and ternary hydrides and a comparison of metal versus metal hydride properties. J Alloy Compd. 2009;478(1-2):731–735.
- Song L-y, Gao X-h, Xue Q-h, et al. Effect of cooling rate and coiling temperature on microstructure and precipitation behavior of a 700 MPa weathering steel. J Mater Eng Perform. 2022;31: 10225–10236.