References
- Alhan, C., and H. P. Gavin. 2004. “A Parametric Study of Linear and Non-Linear Passively Damped Seismic Isolation Systems for Buildings.” Engineering Structures 26: 485–497. doi: 10.1016/j.engstruct.2003.11.004
- Alhan, C., and H. P. Gavin. 2005. “Reliability of Base Isolation for the Protection of Critical Equipment from Earthquake Hazards.” Engineering Structures 27: 1435–1449. doi: 10.1016/j.engstruct.2005.04.007
- Alhan, C., H. P. Gavin, and U. Aldemir. 2006. “Optimal Control: Basis for Performance Comparison of Passive and Semiactive Isolation Systems.” Journal of Engineering Mechanics 132: 705–713. doi: 10.1061/(ASCE)0733-9399(2006)132:7(705)
- Alhan, C., and F. Sahin. 2011. “Protecting Vibration-Sensitive Contents: An Investigation of Floor Accelerations in Seismically Isolated Buildings.” Bulletin of Earthquake Engineering 9: 1203–1226. doi: 10.1007/s10518-010-9236-0
- Alhan, C., and M. Surmeli. 2011. “Shear Building Representations of Seismically Isolated Buildings.” Bulletin of Earthquake Engineering 9: 1643–1671. doi: 10.1007/s10518-011-9293-z
- Bekdaş, G., and S. M. Nigdeli. 2011. “Estimating Optimum Parameters of Tuned Mass Dampers Using Harmony Search.” Engineering Structures 33: 2716–2723. doi: 10.1016/j.engstruct.2011.05.024
- Bigdeli, K., W. Hare, and S. Tesfamariam. 2012. “Configuration Optimization of Dampers for Adjacent Buildings Under Seismic Excitations.” Engineering Optimization 44: 1491–1509. doi: 10.1080/0305215X.2012.654788
- Chopra, A. K. 2001. Dynamics of Structures: Theory and Applications to Earthquake Engineering. 2nd ed. Prentice Hall, NJ: Pearson Education, ISBN 81-7808-472-4.
- Dicleli, M. and S. Buddaram. 2006. “Effect of Isolator and Ground Motion Characteristics on the Performance of Seismic-Isolated Bridges.” Earthquake Engineering & Structural Dynamics 35: 233–250. doi: 10.1002/eqe.522
- Erdal, F. and M. P. Saka. 2009. “Harmony Search Based Algorithm for the Optimum Design of Grillage Systems to LRFD-AISC.” Structural and Multidisciplinary Optimization 38: 25–41. doi: 10.1007/s00158-008-0263-2
- Falsone, G., and G. Ferro. 2006. “Best Performing Parameters of Linear and Non-Linear Seismic Base Isolator Systems Obtained by the Power Flow Analysis.” Computers & Structures 84: 2291–2305. doi: 10.1016/j.compstruc.2006.08.068
- Fragiacomo, M., S. Rajgelj, and F. Cimadom. 2003. “Design of Bilinear Hysteretic Isolation Systems.” Earthquake Engineering & Structural Dynamics 32: 1333–1352. doi: 10.1002/eqe.276
- Geem, Z. W. 2006. “Optimal Cost Design of Water Distribution Networks Using Harmony Search.” Engineering Optimization 38: 259–280. doi: 10.1080/03052150500467430
- Geem, Z. W. 2008. “Novel Derivative of Harmony Search Algorithm for Discrete Design Variables.” Applied Mathematics and Computation 199: 223–230. doi: 10.1016/j.amc.2007.09.049
- Geem, Z. W., Kim, J. H., and G. V. Loganathan. 2001. “A New Heuristic Optimization Algorithm: Harmony Search.” Simulation 76: 60–68. doi: 10.1177/003754970107600201
- Geem, Z. W., and K-B. Sim. 2010. “Parameter Setting Free Harmony Search Algorithm.” Applied Mathematics and Computation 217: 3881–3889. doi: 10.1016/j.amc.2010.09.049
- Geem, Z. W., C. Tseng, and Y. Park. 2005. “Harmony Search for Generalized Orienteering Problem: Best Touring in China.” Lecture Notes in Computer Science 3412: 741–750. doi: 10.1007/11539902_91
- Gueguen, P. 2012. “Experimental Analysis of the Seismic Response of one Base-Isolation Building According to Different Levels of Shaking: Example of the Martinique Earthquake (2007/11/29) Mw 7.3.” Bulletin of Earthquake Engineering 10: 1285–1298. doi: 10.1007/s10518-012-9355-x
- Hameed, A., M. S. Koo, T. D. Do, and J. H. Jeong. 2008. “Effect of Lead Rubber Bearing Characteristics on the Response of Seismic-Isolated Bridges.” KSCE Journal of Civil Engineering 12: 187–196. doi: 10.1007/s12205-008-0187-9
- Hasancebi, O., F. Erdal, and M. P. Saka. 2010. “Adaptive Harmony Search Method for Structural Optimization.” Journal of Structural Engineering 136: 419–431. doi: 10.1061/(ASCE)ST.1943-541X.0000128
- Heaton, T. H., J. F. Hall, and M. W. Halling. 1995. “Response of High-Rise and Base-Isolated Buildings to a Hypothetical MW 7.0 Blind Thrust Earthquake.” Science 267: 206–211. doi: 10.1126/science.267.5195.206
- Huang, P. C., S. Wan, and J. Y. Yen. 2009. “A Novel Method of Searching Appropriate Ranges of Base Isolation Design Parameters Through Entropy-Based Classification.” Structural Control and Health Monitoring 16: 385–405. doi: 10.1002/stc.259
- Jangid, R. S. 1996. “Optimum Damping in a Non-Linear Base Isolation System.” Journal of Sound and Vibration 189: 477–487. doi: 10.1006/jsvi.1996.0030
- Jangid, R. S. 2007. “Optimum Lead-Rubber Isolation Bearings for Near-Fault Motions.” Engineering Structures 29: 2503–2513. doi: 10.1016/j.engstruct.2006.12.010
- Kelly, J. M. 1997. “The Role of Damping in Seismic Isolation.” Earthquake Engineering & Structural Dynamics 2: 3–20.
- Lee, K. S., and Z. W. Geem. 2004. “A New Structural Optimization Method Based on the Harmony Search Algorithm.” Computers & Structures 82: 781–798. doi: 10.1016/j.compstruc.2004.01.002
- Lee, K. S., and Z. W. Geem. 2005. “A New Meta-Heuristic Algorithm for Continuous Engineering Optimization: Harmony Search Theory and Practice.” Computer Methods in Applied Mechanics and Engineering 194: 3902–3933. doi: 10.1016/j.cma.2004.09.007
- Lee, K. S., Z. W. Geem, S. H. Lee, and K. Bae. 2005. “The Harmony Search Heuristic Algorithm for Discrete Structural Optimization.” Engineering Optimization 37: 663–684. doi: 10.1080/03052150500211895
- Mathworks. 2010. MATLAB R2010a. Natick, MA: MathWorks.
- Matsagar, V. A., and R. S. Jangid. 2004. “Influence of Isolator Characteristics on the Response of Base-Isolated Structures.” Earthquake Engineering & Structural Dynamics 11: 43–55.
- Mehrparvar, B., and T. Khoshnoudian. 2012. “Performance-Based Semi-Active Control Algorithm for Protecting Base Isolated Buildings from Near-Fault Earthquakes.” Earthquake Engineering & Structural Dynamics 11: 43–55.
- Nagarajaiah, S., and S. Xiaohong. 2000. “Response of Base-Isolated USC Hospital Building in Northridge Earthquake.” Journal of Structural Engineering 126: 1177–1186. doi: 10.1061/(ASCE)0733-9445(2000)126:10(1177)
- Ozbulut, O. E., and S. Hurlebaus. 2011. “Optimal Design of Superelastic-Friction Base Isolators for Seismic Protection of Highway Bridges Against Near-Field Earthquakes.” Earthquake Engineering & Structural Dynamics 40: 273–291. doi: 10.1002/eqe.1022
- Pan, P., D. Zamfirescu, M. Nakashima, N. Nakayasu, and H. Kashiwa. 2005. “Base-Isolation Design Practice in Japan: Introduction to the Post-Kobe Approach.” Journal of Earthquake Engineering 9: 147–171.
- PEER. 2005. Pacific Earthquake Engineering Resource Center: NGA Database. University of California, Berkeley. Accessed November 2011. http://peer.berkeley.edu/nga
- Politopoulos, I. 2008. “A Review of Adverse Effects of Damping in Seismic Isolation.” Earthquake Engineering & Structural Dynamics 37: 447–465. doi: 10.1002/eqe.763
- Pourzeynali, S., and M. Zarif. 2008. “Multi-Objective Optimization of Seismically Isolated High-Rise Building Structures Using Genetic Algorithms.” Journal of Sound and Vibration 311: 1141–1160. doi: 10.1016/j.jsv.2007.10.008
- Providakis, C. P. 2008. “Effect of LRB Isolators and Supplemental Viscous Dampers on Seismic Isolated Buildings Under Near-Fault Excitations.” Engineering Structures 30: 1187–1198. doi: 10.1016/j.engstruct.2007.07.020
- Saka, M. P. 2009. “Optimum Design of Steel Sway Frames to BS5950 Using Harmony Search Algorithm.” Journal of Constructional Steel Research 65: 36–43. doi: 10.1016/j.jcsr.2008.02.005
- SAP2000. 2003. Structural Analysis Program: Static and Dynamic Finite Element Analysis of Structures, Version 14. Berkeley, CA: Computer and Structures.
- Symans, M. D., and M. C. Constantinou. 1999. “Semiactive Control Systems for Seismic Protection of Structures: A State-of-the-Art Review.” Engineering Structures 6: 469–487. doi: 10.1016/S0141-0296(97)00225-3
- Tsopelas, P., and S. Kunnath. 2010. “Recent Advances in Seismic Isolation: Methods and Tools. Workshop on Advances in Performances-Based Earthquake Engineering, Corfu, Greece, July 2009.” Geotechnical, Geological and Earthquake Engineering 13: 319–329. doi: 10.1007/978-90-481-8746-1_30
- UBC97. 1997. Uniform Building Code. California: International Code of Building Officials (ICBO).
- Yang, J. N., and A. K. Agrawal. 2002. “Semi-Active Hybrid Control Systems for Nonlinear Buildings Against Near-Field Earthquakes.” Engineering Structures 24: 271–280. doi: 10.1016/S0141-0296(01)00094-3